2. Computers & electronics
  3. Audio & home theatre
  4. Video switches
  5. Channel Vision
  6. A0505

Channel Vision A0505 User manual

  • Hello! I am an AI chatbot trained to assist you with the Channel Vision A0505 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
A0505
REMOTE CONTROL
11
CHANN EL VI SI ON
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
CHA N NE L V I S IO N
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
CH ANN EL V ISI ON
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
CHA N NE L VI SI O N
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
2
3
The A0505 allows you to operate many of Channel Vision’s whole-house
audio/video systems without needing to touch the keypad. Additionally,
this remote provides shuttle controls for the A0315, A0314D, AB-315 and
®
other compatible iBus products.
Features:
!
Easily controls your whole-house audio/video system
!
No programming necessary
!
Compatible with: P-1044, AB-114, AB-124, A4601, A4603, A4623, AB-
313, AB-315, A0312, A0314, A0314D, A0315, A0316
Pwr
Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol
+
Vol
-
Using the A0505 remote control...
The A0505 is designed to allow you to control your A4601, A4603, or A4623
without having to touch the buttons on the A0127. Simply point the A0505
remote control at the IR sensor located at the bottom of the A0127 and press
the desired button.
Using the A0505 remote with iBus...
Your iPod’s shuttle controls can be operated
from the A0505 when it is docked in a
compatible iBus wall station.
Zone Power - Turns on/off the zone you are in
Power - Master power for A4601, A4603, and A4623
(turns all zones on/off)
Mute - Mutes the audio
for the zone you are in
VOL - Controls volume
for the zone you are in
iPod
A0315
or
A0314D
or
AB-315
Source Buttons
Source Selection
Buttons
Mute
Mutes audio, but video
will continue.
Volume Up/Down
Adjusts the volume
for the zone you are
in.
Zone Power
Turns off Audio
and Video for
the zone you
are in.
iBus Shuttle Control Buttons
Compatible with iBus wall docking stations.
Not compatible with AB-311
System Power Button
Turns on/off all zones
of the multi-zone audio
system.
MOD
Selects the modulator
input on the Affinity
CATV
Selects the CATV
input on the Affinity
P-6014 functions:
Camera
Camera Cycle
1 Camera 1
2 Camera 2
3 Camera 3
4 Camera 4
Next
CHA N NE L V I S IO N
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
CH ANN EL V ISI ON
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
CHA N NE L VI SI O N
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
2
3
The A0505 allows you to operate many of Channel Vision’s whole-house
audio/video systems without needing to touch the keypad. Additionally,
this remote provides shuttle controls for the A0315, A0314D, AB-315 and
®
other compatible iBus products.
Features:
!
Easily controls your whole-house audio/video system
!
No programming necessary
!
Compatible with: P-1044, AB-114, AB-124, A4601, A4603, A4623, AB-
313, AB-315, A0312, A0314, A0314D, A0315, A0316
Pwr
Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol
+
Vol
-
Using the A0505 remote control...
The A0505 is designed to allow you to control your A4601, A4603, or A4623
without having to touch the buttons on the A0127. Simply point the A0505
remote control at the IR sensor located at the bottom of the A0127 and press
the desired button.
Using the A0505 remote with iBus...
Your iPod’s shuttle controls can be operated
from the A0505 when it is docked in a
compatible iBus wall station.
Zone Power - Turns on/off the zone you are in
Power - Master power for A4601, A4603, and A4623
(turns all zones on/off)
Mute - Mutes the audio
for the zone you are in
VOL - Controls volume
for the zone you are in
iPod
A0315
or
A0314D
or
AB-315
Source Buttons
Source Selection
Buttons
Mute
Mutes audio, but video
will continue.
Volume Up/Down
Adjusts the volume
for the zone you are
in.
Zone Power
Turns off Audio
and Video for
the zone you
are in.
iBus Shuttle Control Buttons
Compatible with iBus wall docking stations.
Not compatible with AB-311
System Power Button
Turns on/off all zones
of the multi-zone audio
system.
MOD
Selects the modulator
input on the Affinity
CATV
Selects the CATV
input on the Affinity
P-6014 functions:
Camera
Camera Cycle
1 Camera 1
2 Camera 2
3 Camera 3
4 Camera 4
Next
CHA N NE L VI SI ON
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
Source
CHA NN EL VIS IO N
Pwr
5
Using the A0505 remote control... P-0321 or P-0328
The A0505 is designed to control your Affinity (P-0321 or P-0328), enabling you
to easily switch between two different RF signals. Just point the remote to an IR
receiver connected to the coax-based IR system and the IR signal will travel
back to the Affinity and change it to the desired input.
Using the A0505 remote control... Multi-Source A-BUS
The A0505 is designed to allow you to control your P-1044 without having to
touch the buttons on the AB-124 keypad. Simply point the A0505 remote
control at the IR sensor located at the bottom of the AB-124 and press the
desired button.
Zone Power - Turns on/off the zone output of the P-1044 that the AB-124
is connected to
Power - Turns on/off the AB-124 amplified keypad.
Mute - Mutes the
AB-124 keypad
Pressing buttons 1-4 will
cause the corresponding
LED indicator to light.
VOL - Controls volume
for the AB-124
Source Buttons
4
CH ANN EL V ISI ON
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
C
HA NN
EL
VI SIO
N
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CA
TV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
PRO
CH A N N E L
TM
VI S I O N
Model
P-0321
CATV Input
MOD Input
Output
Power
IR Out
Pat. Pending
Input from
CATV
Input from
Modulator
MOD - Selects the modulator input on the Affinity
CATV - Selects the CATV input on the Affinity
Part No. HS-2
2
-W
AY SPLITTER/COMBINER
5MHz-1GHz All Port DC passing
TM
C
HAN NEL VI
SIO
N
IN
/out
OUT/in
OUT
/in
Digital CATV Box
IR Coax Adaptor
with IR receiver
P-0321
TV set
Note: See TV connection
details on the following page
CHA N NE L VI SI ON
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
Source
CHA NN EL VIS IO N
Pwr
5
Using the A0505 remote control... P-0321 or P-0328
The A0505 is designed to control your Affinity (P-0321 or P-0328), enabling you
to easily switch between two different RF signals. Just point the remote to an IR
receiver connected to the coax-based IR system and the IR signal will travel
back to the Affinity and change it to the desired input.
Using the A0505 remote control... Multi-Source A-BUS
The A0505 is designed to allow you to control your P-1044 without having to
touch the buttons on the AB-124 keypad. Simply point the A0505 remote
control at the IR sensor located at the bottom of the AB-124 and press the
desired button.
Zone Power - Turns on/off the zone output of the P-1044 that the AB-124
is connected to
Power - Turns on/off the AB-124 amplified keypad.
Mute - Mutes the
AB-124 keypad
Pressing buttons 1-4 will
cause the corresponding
LED indicator to light.
VOL - Controls volume
for the AB-124
Source Buttons
4
CH ANN EL V ISI ON
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
C
HA
NN
EL
V ISIO
N
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
PRO
CH A N N E L
TM
VI S I O N
Model
P-0321
CATV Input
MOD Input
Output
Power
IR Out
Pat. Pending
Input from
CATV
Input from
Modulator
MOD - Selects the modulator input on the Affinity
CATV - Selects the CATV input on the Affinity
Part No. HS-2
2
-W
AY SPLITTER/COMBINER
5MHz-1GHz All Port DC passing
TM
C
HA
N
NEL V I
SIO
N
IN
/out
OUT/in
OUT
/in
Digital CATV Box
IR Coax Adaptor
with IR receiver
P-0321
TV set
Note: See TV connection
details on the following page
6
7
P-6014
Loop Out 1
Loop Out 2
Loop Out 3
Loop Out 4
Monitor 1
Monitor 2
IR Input
IR Output
Power
Inputs
Camera 1
Camera 2
Camera 3
Camera 4
V
ideo
Audio
PRO
C
H
A
NNE
L
T
M
VI
SIO N
Model
P-6014
V
ideo Present
Camera 1
Camera 2
Camera 3
Camera 4
RS-232
T
ime
Adjust
Max
CAT5 CAMERA SEQUENCER
IR-2400
CH ANN
EL
V
I
S
I
O
N
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
4
3
2
1
CAMERA
Using the A0505 remote control... P-6014 Camera Sequencer
The A0505 is designed to allow you to control the switching functions on your
P-6014. The A0505 allows you to choose any of the 4 cameras or select the
Auto Cycle mode.
Note: Camera
connections are not
shown in this diagram,
but the P-6014 can
support up to 4 CAT5
cameras.
A0505 IR codes in HEX format...
Some high-end programmable remote controls allow installers to input and
store IR codes in HEX format. These codes are listed below:
All Power: 0000 006D 0000 000C 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F
001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 001F 001F 0CC3
iBus Play/Pause: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F
001F 001F 001F 001F 003F 001F 001F 001F 001F 003F 003F 003F 001F 0CA2
iBus Skip <<: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F
001F 001F 001F 003F 001F 001F 003F 001F 001F 003F 003F 001F 0CA2
iBus Skip >>: 0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F
001F 001F 001F 003F 003F 003F 001F 001F 003F 003F 0CC3
Mute: 0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F
001F 001F 003F 003F 003F 003F 003F 001F 001F 0CCA
Source 1: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F
001F 001F 003F 003F 001F 001F 003F 001F 001F 001F 001F 0CCA
Source 2: 0000 006D 0000 000C 001F 001F 001F 001F 0040 0040 001F 001F 001F 001F
001F 001F 0040 0040 001F 001F 001F 001F 001F 001F 001F 001F 001F 0CA9
Source 3: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F
001F 001F 003F 003F 003F 003F 001F 001F 001F 001F 001F 0CAA
Source 4: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F
001F 001F 003F 003F 003F 001F 001F 001F 001F 003F 001F 0CAA
Volume Down: 0000 006D 0000 000C 001F 001F 0040 001F 001F 0040 001F 001F 001F
001F 001F 001F 0040 001F 001F 001F 001F 001F 001F 001F 001F 0040 001F 0CAA
Volume Up: 0000 006D 0000 000C 001F 001F 001F 001F 003F 003F 001F 001F 001F
001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 0CA6
Zone Power: 0000 006D 0000 000C 001F 001F 001F 001F 0040 0040 001F 001F 001F
001F 001F 001F 001F 001F 0040 001F 001F 001F 001F 0040 001F 001F 001F 0CA9
Camera 1: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F
001F 001F 003F 003F 001F 001F 003F 001F 001F 003F 001F 0CA5
Camera 2: 0000 006D 0000 000C 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F
001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 001F 0CA5
Camera 3: 0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F
001F 001F 003F 003F 001F 001F 003F 003F 003F 0CC5
Camera 4: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F
001F 001F 001F 001F 003F 001F 001F 001F 001F 003F 003F 0CC5
Camera Next: 0000 006D 0000 000C 001F 001F 001F 001F 003F 003F 001F 001F 001F
001F 001F 001F 003F 001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 0CA5
Camera Cycle: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F
001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 003F 0CC5
CATV: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F
001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 0CC5
MOD: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F
001F 003F 003F 001F 001F 003F 003F 001F 001F 001F 0CA5
What these buttons do:
Camera Next... Changes the Monitor output to the next
camera in the sequence. If you’re viewing camera 1, pressing
it once will show camera 2 and so on.
Camera Cycle... Causes the Monitor output to sequence
through the cameras. The time adjustment on the P-6014 determines
how long each camera view is displayed before switching to the next one.
1, 2, 3, 4 Camera Views... Changes the Monitor output directly to the
corresponding camera input.
6
7
P-6014
Loop Out 1
Loop Out 2
Loop Out 3
Loop Out 4
Monitor 1
Monitor 2
IR Input
IR Output
Power
Inputs
Camera 1
Camera 2
Camera 3
Camera 4
Video
Audio
PRO
C
H
ANN E
L
T
M
VI
SIO N
Model
P-6014
V
ideo Present
Camera 1
Camera 2
Camera 3
Camera 4
RS-232
Time Adjust
Max
CA
T5 CAMERA
SEQUENCER
IR-2400
CH ANN
E
L
V
IS
I
O
N
S
O
U
R
C
E
ZONE
POWER
MUTE
4
3
2
1
CAMERA
CATV
MOD
VOL
1
2
3
4
MODEL
A0505
POWER
4
3
2
1
CAMERA
Using the A0505 remote control... P-6014 Camera Sequencer
The A0505 is designed to allow you to control the switching functions on your
P-6014. The A0505 allows you to choose any of the 4 cameras or select the
Auto Cycle mode.
Note: Camera
connections are not
shown in this diagram,
but the P-6014 can
support up to 4 CAT5
cameras.
A0505 IR codes in HEX format...
Some high-end programmable remote controls allow installers to input and
store IR codes in HEX format. These codes are listed below:
All Power: 0000 006D 0000 000C 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F
001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 001F 001F 0CC3
iBus Play/Pause: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F
001F 001F 001F 001F 003F 001F 001F 001F 001F 003F 003F 003F 001F 0CA2
iBus Skip <<: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F
001F 001F 001F 003F 001F 001F 003F 001F 001F 003F 003F 001F 0CA2
iBus Skip >>: 0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F
001F 001F 001F 003F 003F 003F 001F 001F 003F 003F 0CC3
Mute: 0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F
001F 001F 003F 003F 003F 003F 003F 001F 001F 0CCA
Source 1: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F
001F 001F 003F 003F 001F 001F 003F 001F 001F 001F 001F 0CCA
Source 2: 0000 006D 0000 000C 001F 001F 001F 001F 0040 0040 001F 001F 001F 001F
001F 001F 0040 0040 001F 001F 001F 001F 001F 001F 001F 001F 001F 0CA9
Source 3: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F
001F 001F 003F 003F 003F 003F 001F 001F 001F 001F 001F 0CAA
Source 4: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F
001F 001F 003F 003F 003F 001F 001F 001F 001F 003F 001F 0CAA
Volume Down: 0000 006D 0000 000C 001F 001F 0040 001F 001F 0040 001F 001F 001F
001F 001F 001F 0040 001F 001F 001F 001F 001F 001F 001F 001F 0040 001F 0CAA
Volume Up: 0000 006D 0000 000C 001F 001F 001F 001F 003F 003F 001F 001F 001F
001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 001F 001F 001F 0CA6
Zone Power: 0000 006D 0000 000C 001F 001F 001F 001F 0040 0040 001F 001F 001F
001F 001F 001F 001F 001F 0040 001F 001F 001F 001F 0040 001F 001F 001F 0CA9
Camera 1: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F
001F 001F 003F 003F 001F 001F 003F 001F 001F 003F 001F 0CA5
Camera 2: 0000 006D 0000 000C 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F
001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 001F 0CA5
Camera 3: 0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F
001F 001F 003F 003F 001F 001F 003F 003F 003F 0CC5
Camera 4: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F
001F 001F 001F 001F 003F 001F 001F 001F 001F 003F 003F 0CC5
Camera Next: 0000 006D 0000 000C 001F 001F 001F 001F 003F 003F 001F 001F 001F
001F 001F 001F 003F 001F 001F 001F 001F 003F 001F 001F 001F 001F 001F 0CA5
Camera Cycle: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F
001F 001F 001F 003F 001F 001F 001F 001F 001F 001F 003F 003F 0CC5
CATV: 0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F
001F 001F 003F 003F 001F 001F 001F 001F 001F 001F 003F 0CC5
MOD: 0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F
001F 003F 003F 001F 001F 003F 003F 001F 001F 001F 0CA5
What these buttons do:
Camera Next... Changes the Monitor output to the next
camera in the sequence. If you’re viewing camera 1, pressing
it once will show camera 2 and so on.
Camera Cycle... Causes the Monitor output to sequence
through the cameras. The time adjustment on the P-6014 determines
how long each camera view is displayed before switching to the next one.
1, 2, 3, 4 Camera Views... Changes the Monitor output directly to the
corresponding camera input.
500-200 rev B
w w w . c h a n n e l v i s i o n . c o m
234 Fischer Avenue, Costa Mesa, California 92626 USA
(714)424-6500 (800)840-0288 (714)424-6510 fax
email: [email protected]
Channel Vision Technology will repair or replace any defect in material or
workmanship which occurs during normal use of this product with new or
rebuilt parts, free of charge in the USA, for one year from the date of
original purchase. This is a no hassle warranty with no mail in warranty
card needed. This warranty does not cover damages in shipment, failures
caused by other products not supplied by Channel Vision Technology, or
failures due to accident, misuse, abuse, or alteration of the equipment. This
warranty is extended only to the original purchaser, and a purchase receipt,
invoice, or other proof of original purchase date will be required before
warranty repairs are provided. Channel Vision products are not intended
for use in medical, lifesaving, life sustaining or critical environment
applications. Channel Vision customers using or selling Channel Vision
products for use in such applications do so at their own risk and agree to
fully indemnify Channel Vision for any damages resulting from such
improper use or sale.
Mail in service can be obtained during the warranty period by calling (714)
424-0288 toll free. A Return Authorization number must be obtained in
advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other rights
(which vary from state to state). If a problem with this product develops
during or after the warranty period, please contact Channel Vision
Technology, your dealer or any factory-authorized service center.
1
/