ALZO Video 32 Stony Hill Rd, Bethel, CT 06801
alzovideo.com csupport@alzovideo .com 800-582-7009
1842 IS
ALZO 792 LED VIDEO LIGHT USER GUIDE
• ALZO 792 VIDEO LIGHT
• MINI BALL MOUNT
•
DIFFUSER
Batteries, battery chargers and AC adaptors are not included.
Assure that the power intensity knob is fully counter-
clockwise and OFF. Install 1 Sony Style NP series battery on
the back panel mount with a slide in action to the left. Turn
on the light and adjust the level and color temperature as
desired. Release the battery by pushing on the red button
and sliding the battery to the right.
The ALZO 792 LED light can operate from any NP-Series Li-
ion batteries including:
NP-F550, F750, F960, F570, F770, & F970
NP-FM55H
We recommend using F770 or larger batteries.
Setup and Usage:
To use the ball mount first screw the mount screw into the
base of the light and tighten the thumb wheel on the base of
the light until firm. Tighten the wing screw on the side of the
mount until the ball mount is rigid. Then loosen the thumb
wheel over the square shoe mount on the base of the ball
mount Slide the shoe mount onto to the camera hot shoe or
rig cold shoe and tighten the thumbwheel on the shoe. Then
loosen the wing screw on the side of the mount to rotate the
light and adjust the angle and finally tighten the wing screw
on the side of the mount.
The shoe mount attaches to the light with a ¼” x 20 screw
thread.
The DC input jack can be used with an approved AC adaptor
or a 12VDC power source with 5.5mm DIN connector.
Available accessories include:
ALZO AC ADAPTOR
PANASONIC BATTERY ADAPTOR
Press the TEST (T) button to monitor
the battery charge status:
.
3 lights = 60 - 100%
2 lights = 40 - 60%
1 lights = 20 - 40%
If you have additional questions regarding the application of this equipment,
we welcome you to contact us directly. csupport@alzodigital.com or 800-582-7009.