ALZO Ball Head Tripod User manual

  • Hello! I am an AI chatbot trained to assist you with the ALZO Ball Head Tripod User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
2/27/2016 ALZOBallHeadTripodUserGuide
http://www.alzodigital.com/customer_support/assy_alzo_ball_head_tripod_user_guideshopify.htm 1/2
UserGuideforALZOBallHeadCameraTripod
CAMERAQUICKRELEASEPLATE
PlateisreleasedbyrotatingQUICKRELEASE
LEVERintoholdopenposition.Plateattaches
tocamerawithprovideduniversalthreaded
screwmountandthensnapsintopositionon
tripod.QUICKRELEASELEVERthencloses
andcanbelockedwithQUICKRELEASE
LATCH.
BALLFRICTIONCONTROL
RotatingtheBALLFRICTIONCONTROLallows
fineadjustmentofcamerarotationfriction,
fromloosetolocked.
RISERCLAMP
Tripodriserrodisraisedandloweredby
handandlockedintopositionbytightening
thisclamp.
LEGRELEASE
Thetripodlegscanbesetto3differentopen
anglesallowingformanytripodattitudes.
PressLEGRELEASEinwhenopeningleg
angletoattaingreaterangles.
QUICKRELEASELATCHPIN
Thequickreleaselatchpinisusedtolockthe
cameraQUICKRELEASELEVERfromopening
unintentionally,therebypreventingcamera
accidentaldetachmentfromtripod.Normally
thislatchpinisinthereleasedposition.
Oncethecameraisinplaceonthetripod,
movingtheQUICKRELEASELATCHPINtothe
lockedpositionwillpreventopeningthe
QUICKRELEASELEVERandremovingthe
camera.
Cautionshouldbeobservedwhenusinga
tripodbecausesupportingacameraona
tripoddoesnotguaranteethatacamerawill
notfall.Donotleaveacameraunattended
onatripodwherechildrenordogscould
upsetthetripod.
INVERTRISERROD
Thistripodfunctionisusedforfrogseyeview
2/27/2016 ALZOBallHeadTripodUserGuide
http://www.alzodigital.com/customer_support/assy_alzo_ball_head_tripod_user_guideshopify.htm 2/2
photography.Toinverttheverticalsupport
rod,firstattachthecameraquickreleaseto
yourcamera.Leavethecameraunattached
tothetripod.
Thenremovetherubberorplasticbase
attachedtothebottomoftherod.Loosenthe
riserclampandpulluptherodandremoveit
fromthetripod.Nowinstalltherodfromthe
bottomasshownontheleft,andthenattach
thecamera.Tightentheriserclampbefore
attachingthecamera.
/