Unbranded 08239206031 Operating instructions

Assembly - Attaching the Accessories

Installing the bulbs and glass bowl

□With the power off, install the two LED bulbs (I) (Max. 9.5W,

included) by screwing into the light bulb sockets.

□Place the glass bowl (H) into the light kit assembly, aligning

the three at areas on the top ange of the glass bowl (H) with

the three raised dimples in the light kit assembly. Turn the

glass bowl (H) clockwise until it stops.

WARNING: Do not overtighten when installing the shade into the

light kit. Allow the shade to cool completely before removing.