Symmons HC-3 Installation guide

Type
Installation guide

This manual is also suitable for

Symmons HC-3 is a padded shower seat that provides a safe and comfortable bathing experience for individuals with limited mobility or those who prefer added support while showering. It features a sturdy stainless steel construction, ensuring durability and longevity.

The HC-3's compact design makes it suitable for smaller bathrooms or showers, measuring 32 inches in length, 12 inches in width, and 14 inches in height when folded up. It has a weight capacity of 250 pounds and is ADA compliant, meeting the standards set by the Americans with Disabilities Act for accessibility and safety.

The seat's padded surface provides added comfort and support, making it ideal for those who may experience discomfort or pain while sitting for extended periods. It is designed to fold up when not in use, maximizing space and maintaining a clean and organized bathroom aesthetic.

Symmons HC-3 is a padded shower seat that provides a safe and comfortable bathing experience for individuals with limited mobility or those who prefer added support while showering. It features a sturdy stainless steel construction, ensuring durability and longevity.

The HC-3's compact design makes it suitable for smaller bathrooms or showers, measuring 32 inches in length, 12 inches in width, and 14 inches in height when folded up. It has a weight capacity of 250 pounds and is ADA compliant, meeting the standards set by the Americans with Disabilities Act for accessibility and safety.

The seat's padded surface provides added comfort and support, making it ideal for those who may experience discomfort or pain while sitting for extended periods. It is designed to fold up when not in use, maximizing space and maintaining a clean and organized bathroom aesthetic.

Feature Highlights:
Seat capacity is 250 pounds.
Grab bar is designed and tested to meet
ADA standards.
Right side padded seat only (HC-119)
Le side padded seat only (HC-120)
Grab Bar Installation
Secure to wall with three anges.
For installation on stud wall, steel or
berglass construction use in wall
backing at all fastener locations to
comply with local building codes.
For installation on solid walls, use
expansion anchors and screws in
compliance with local building codes.
Note: Fasteners are not provided by
Symmons.
Clearance is the distance between the
nished wall surface and the inner
edge of the tubing. e standard
clearance furnished is 1-1/2”
(38mm).
Dimensions are measured from
centerline to centerline of tubing,
unless noted on grab bar application
by circle dimensions which are from
centerline of tubing to wall.
Warranty:
Limited Lifetime - to the original end
purchaser in consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty
for complete warranty information.
Compliance:
Americans with Disabilities Act
(ADA)
Shower Seat Installation
Secure unit to wall with two
anges (3 fasteners each), and with
wall bracket (4 fasteners).
For installations on stud wall,
steel or berglass construction,
use in wall backing at all fastener
locations to comply with local
building codes.
For installation on solid walls, use
expansion anchors and screws in
compliance with local building
codes.
Note: Fasteners are not provided
by Symmons.
Grab Bar Construction
Tubing
Stainless steel contruction.
Exposed surfaces in satin nickel
nish.
Concealed Flange
3” diameter ange furnished with
3 stainless steel set screws and one
backplate.
Flanges and center posts are heliarc
welded to tubing.
Shower Seat Operation
Shower seat folds up when not in
use and is retained upright by wall
bracket spring retainer.
1 1/2" (38mm)
1 1/2" (38mm)
(38mm) diameter
Concealed Flange
1-1/2”
Warning: to avoid damaging or
pulling seat out of the wall, sit down
gently. Do not drop down on seat
suddenly.
Padded Shower Seat
HC-3, HC-4, HC-119 & HC-120
Folding Padded Seat with Grab Bar
Installation Instructions
For California Residents
WARNING: is product contains
chemicals known to the State of California
to cause cancer, birth defects, or other
reproductive harm.
Dimensions Padded Shower Seat, HC-3 and HC-4
Note: Design and Dimensions subject to change without notice.
18 1/2”
470 mm
8 5/8”
219 mm
32”
813 mm
12”
305 mm
14”
356 mm 22”
559 mm
1 1/8”
29 mm
17” - 19” (432 mm - 483 mm)
LH RH
11 1/2”
292 mm
s
s
s
s
32-1/4"
819 mm
20-1/4"
514 mm
6-3/4"
171 mm
17" – 19"
432mm – 483mm
33" – 36"
838mm – 914mm
33" illustrated
38"
965mm
control area
within 15" of
48"
1219mm
Note: Design and Dimensions subject to change without notice.
Top view
Dimensions Grab Bar for Padded Shower Seat, HC-3 and HC-4
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621
Copyright © 2017 Symmons Industries, Inc. symmons.com [email protected] ZV-414 REV B 022817
  • Page 1 1
  • Page 2 2

Symmons HC-3 Installation guide

Type
Installation guide
This manual is also suitable for

Symmons HC-3 is a padded shower seat that provides a safe and comfortable bathing experience for individuals with limited mobility or those who prefer added support while showering. It features a sturdy stainless steel construction, ensuring durability and longevity.

The HC-3's compact design makes it suitable for smaller bathrooms or showers, measuring 32 inches in length, 12 inches in width, and 14 inches in height when folded up. It has a weight capacity of 250 pounds and is ADA compliant, meeting the standards set by the Americans with Disabilities Act for accessibility and safety.

The seat's padded surface provides added comfort and support, making it ideal for those who may experience discomfort or pain while sitting for extended periods. It is designed to fold up when not in use, maximizing space and maintaining a clean and organized bathroom aesthetic.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI