Hamilton Electronics A 6436 IBS User manual

Brand
Hamilton Electronics
Model
A 6436 IBS
Category
Sanitary ware
Type
User manual
Special Notes: This unit complies with ANSI Z124.2, ICC/ ANSI A117.1, UPC, HUD, ASTM F462, ASTM E84, ADA, ABA, SBCCI, NAHB.
Warranty: Gelcoat models have a 3 year limited warranty. Acrylic models have a 5 year limited warranty. Pumps, parts, and accessories 1 year limited
warranty. For further details please refer to the complete warranty section.
Due to the nature of the materials, dimensions may vary
+
/ -
1/2”
.
DRAWING REQUEST MUST BE MADE FOR PACKAGE 2 DRAWING AND BULIT TO ORDER UNITS.
701A rev. 09/25/07
A 6436 I
OD: 64.5” x 36.25” x 82.75”
ID: 60” x 36” CENTER POINT
WEIGHT: 255
LOAD FACTOR: 2
HANDED BY: CENTER DRAIN OR SEAT L/R
ADA / ANSI
Roll-In Showers
ONE-PIECE DOMED ACRYLIC
A 6436 IBS
PHOTOGRAPH AT LEFT
ILLUSTRATES PACKAGE ONE
(HANDED BY SEAT LEFT)
Premium Cast Acrylic
Five Year Warranty
Primary Applications:
• Healthcare
• College Dormitory
• Hospitality
• Schools
A
DA / ANSI Roll-In Showers
ONE-PIECE DOMED ACRYLIC
7
01A
- NO MODIFICATIONS TO PACKAGES. FOR BUILT TO ORDER UNIT, SELECT BASE UNIT AND ACCESSORIES.
P
KG ONE-ADA/ANSI: A 6436 IBS List: $3219
.75" NO RECESS BF THRESHOLD MUDSET
Handed by SEAT L/R WHITE PREMIUM CAST ACRYLIC
Factory Installed Accessories (
VALVE/SHOWER KIT NOT INCLUDED IN PKG1)
L-BAR 37" x 33" x 1.5" SMOOTH SS RADIUS
SEAT 32" X 21" FRAMELESS WHITE HDPE RAD FOLD UP
ROD 1" OD 20 GAUGE SS GROMMET STYLE
F
O
R ADA/ANSI COMPLIANCE WITH SEAT: INSTALLED ACCESSORIES MUST INCLUDE: L-BAR, L-SEAT, PRESSURE
B
ALANCING MIXING VALVE, HAND HELD SHOWER WITH SLIDE BAR (BACK WALL, WITH IN REACH OF SEATED USER),
V
ACUUM BREAKER & 60" HOSE. UNIT & ACCESSORIES INSTALLED PER ADA/ANSI & PRAXIS INSTALLATION &
W
ARRANTY GUIDELINES.
PKG TWO-ADA/ANSI: A 6436 IB List: $2600
.75" NO RECESS BF THRESHOLD MUDSET
Handed by CENTER DRAIN WHITE PREMIUM CAST ACRYLIC
Factory Installed Accessories (VALVE/SHOWER KIT NOT INCLUDED IN PKG2)
U-BAR 33" X 60" X 33" X 1.5" SMOOTH SS RADIUS W/ CENTER FLANGE
ROD 1" OD 20 GAUGE SS GROMMET STYLE
FOR ADA/ANSI COMPLIANCE LESS SEAT: INSTALLED ACCESSORIES MUST INCLUDE: U-BAR, PRESSURE BALANCING
MIXING VALVE, HAND HELD SHOWER WITH SLIDE BAR (SIDE OR BACK WALL), VACUUM BREAKER AND 60" HOSE.
UNIT AND ACCESSORIES INSTALLED PER ADA/ANSI & PRAXIS INSTALLATION & WARRANTY GUIDELINES.
BUILD TO ORDER BASE PLUS ACCESSORIES
BASE UNIT 1: A 6436 I List: $2185
SPECIFY THRESHOLD HEIGHT MUDSET
Handed by CENTER DRAIN OR SEAT L/R
Reinforced for Standard Accessories
BASE UNIT OPTIONAL ACCESSORIES List:
FINISHES
STANDARD FINISH- PREMIUM CAST ACRYLIC: WHITE, BONE, BISCUIT $0
GRAB BARS
L-BAR 37" x 33" x 1.5" SMOOTH SS RADIUS $216
L-BAR 37" x 33" x 1.25" SMOOTH WHITE RADIUS $335
U-BAR 33" X 60" X 33" X 1.5" SMOOTH SS RADIUS W/ CENTER FLANGE $399
INSIDE CURTAIN LINE SEATS
(REVISED ADA-ABA 2004)
SEAT 32" X 21" FRAMELESS WHITE HDPE RAD FOLD UP $747
SEAT 32" X 21" FRAMELESS WHITE PADDED RAD FOLD UP $747
SEAT 32" X 21" FRAMELESS WOODGRAIN PHENOLIC RAD FOLD UP $747
SEAT 32" X 14.5" WHITE PADDED W/LEGS (BARIACTRIC) $1281
FACTORY MODIFICATIONS
MOD VALVE DRILLING - SPECIFY HOLE SIZE $56
MOD INSTALL STANDARD SYMMONS VALVE PACKAGE $633
MOD INSTALL HANS GROHE THERMOSTATIC VALVE PACKAGE (XLT) $501
MOD INSTALL POWERS VALVE PACKAGE (XLT) $656
MOD INSTALL 30" SLIDE BAR / HS KIT $411
MOD .75" NO RECESS BF THRESHOLD $111
MOD 2" BF THRESHOLD $0
MOD ARMORSHIELD P3 PROTECTION $149
CURTAIN RODS
ROD 1" OD 20 GAUGE SS GROMMET STYLE $71
ROD 1" OD 20 GAUGE WHITE GROMMET STYLE $138
FIELD INSTALLED ACCESSORIES
LOOSE CURTAIN PREMIUM 66" X 72" WHITE NYLON WTD $180
LOOSE CURTAIN HEAVY DUTY 66" X 72" WHITE VINYL WTD $119
ADDITIONAL ACCESSORIES AND SERVICES MAY BE AVAILABLE UPON REQUEST
.75” NO RECESS THRESHOLD
LESS EASY BASE
MUD SET REQUIRED
REQUIRES .75”
FINISHED FLOOR TO
MEET ADA
.75” NO RECESS THRESHOLD
WITH EASY BASE
N
O MUD SET REQUIRED
REQUIRES .75”
FINISHED FLOOR TO
MEET ADA
MUD SET REQUIRED
1.25” RECESS THRESHOLD
L
ESS EASY BASE
REQUIRES 1.25”
RECESSED FLOOR TO
MEET ADA
MUD SET REQUIRED
2.0” RECESS THRESHOLD
LESS EASY BASE
ADA ROLL-IN SHOWER THRESHOLD REQUIREMENT
REQUIRES 2.0”
RECESSED FLOOR TO
MEET ADA
NO CURB ALLOWED
NO CURB ALLOWED
NO CURB ALLOWED
NO CURB ALLOWED
FLOOR
FLOOR
FLOOR
FLOOR
SHOWER
SHOWER
SHOWER
SHOWER
ADHESIVE REQUIRED
ADA Roll-In Threshold Requirements:
.
75” NO RECESS THRESHOLD
L
ESS EASY BASE
M
UD SET REQUIRED
REQUIRES .75”
FINISHED FLOOR TO
MEET ADA
.
75” NO RECESS THRESHOLD
WITH EASY BASE
N
O MUD SET REQUIRED
REQUIRES .75”
F
INISHED FLOOR TO
MEET ADA
MUD SET REQUIRED
1.25” RECESS THRESHOLD
LESS EASY BASE
R
EQUIRES 1.25”
R
ECESSED FLOOR TO
M
EET ADA
MUD SET REQUIRED
2.0” RECESS THRESHOLD
L
ESS EASY BASE
ADA ROLL-IN SHOWER THRESHOLD REQUIREMENT
REQUIRES 2.0”
RECESSED FLOOR TO
MEET ADA
NO CURB ALLOWED
NO CURB ALLOWED
NO CURB ALLOWED
NO CURB ALLOWED
FLOOR
FLOOR
FLOOR
FLOOR
SHOWER
S
HOWER
S
HOWER
S
HOWER
ADHESIVE REQUIRED
Hamilton Bathware/Praxis Companies, LLC.
435 Industrial Road, Savannah • Tennessee 38372 • Customer Service: 800.326.5489 • Fax: 888.246.0466 • www.hamiltonbathware.com
Product Availability
Hamilton Northeast
XLT-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton Mid-America
XL
T-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton South
STD-ST
ANDARD LEADTIME
Commercial Showers & Tub Showers
64” Acrylic Shower
PACKAGE ONE - ADA/ANSI A 6436 IBS
A
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
ADA CODES
B
CD
37”
64
1
”
4
18” 18
UPC/SKU NUMBERS
:etaD:dengiS
Contact Phone Number:
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
Praxis Quality Installation Assurance Program Information: Phone: (800)-759-7744 ext: 29.
Customer Service: (800)-443-7269 Fax: (731)-925-0379
This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.
Important installation procedures MUST be followed for the fixture to be granted a warranty.
ANSI Z124.2
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
ICC/ANSI A117.1
HUD/ADA
UFAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
3”
4
Right Hand Valve:
CONTRACTOR
CONTRACTOR
ADA COMPLIANCE REQUIREMENTS
For ADA compliance with seat: Installed accessories must include: L-shaped fold up seat, horizontal L-grab bar, pressure balanc-
ing mixing valve, hand held shower with slide bar (on back wall within reach of seated user), vacuum breaker and 60” hose. Unit
and accessories must be installed per ADA and Praxis guidelines.
Durable cast acrylic finish
Low threshold entry
Molded accessory shelf
Integral dome
HDPE fold up seat
Stainless steel grab bar
Stainless steel curtain rod
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR
IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY
INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.
ATTENTION PLUMBING CONTRACTOR!!!
10” Diameter x 1/2” Deep
Recess Around Drain Core
Unit must be installed into
a recessed pit -or- build up
finished floor to comply with
ADA threshold guidelines.
No modifications accepted (Packaged units only)
Special Notes: This unit complies with TAS, ANSI Z124.2, ICC/ANSI A117.1, UPC, HUD, ASTM F462,
ASTM E84, ADA, ABA, BOCA, SBCCI, NAHB.
Warranty: Gelcoat models have a 3 year limited warranty. Acrylic models have a 5 year limited
warranty. Pumps, parts, and accessories 1 year limited warranty. For further details please refer to the
complete warranty section.
Due to the nature of the materials, dimensions may vary +
/ -
1/2”
.
DRAWING REQUEST MUST BE MADE FOR PACKAGE 2 DRAWING AND
BULIT TO ORDER UNITS.
701B rev. 09/25/07
A 6436 I TAS
OD: 64.5” x 36.25” x 82.75”
ID: 60” x 36” CENTER POINT
WEIGHT: 255
LOAD FACTOR: 2
HANDED BY: SEAT L/R OR CENTER
A 6436 IBS TAS
PHOTOGRAPH AT LEFT
ILLUSTRATES PACKAGE ONE
(HANDED BY SEAT LEFT)
Premium Cast Acrylic
Five Year Warranty
Primary Applications:
• Healthcare
• College Dormitory
• Hospitality
• Schools
TAS Roll-In Showers ONE-PIECE DOMED ACRYLIC
701B- NO MODIFICATIONS TO PACKAGES. FOR BUILT TO ORDER UNIT, SELECT BASE UNIT AND ACCESSORIES.
P
KG ONE-TAS: A 6436 IBS TAS List: $3219
.75" NO RECESS BF THRESHOLD MUDSET
H
anded by SEAT L/R WHITE PREMIUM CAST ACRYLIC
Factory Installed Accessories (VALVE/SHOWER KIT NOT INCLUDED IN PKG1)
L-BAR 37" x 33" x 1.5" SMOOTH SS RADIUS
SEAT 34.5" X 21" FRAMELESS WHITE HDPE RAD FOLD UP
ROD 1" OD 20 GAUGE SS GROMMET STYLE
FOR TAS COMPLIANCE WITH SEAT: INSTALLED ACCESSORIES MUST INCLUDE: L-BAR, 34.5" L-SEAT,
PRESSURE BALANCING MIXING VALVE, HAND HELD SHOWER WITH SLIDE BAR (BACK WALL, WITH IN
REACH OF SEATED USER), VACUUM BREAKER & 60" HOSE. UNIT & ACCESSORIES INSTALLED PER TAS
& PRAXIS INSTALLATION & WARRANTY GUIDELINES.
BUILD TO ORDER BASE PLUS ACCESSORIES
BASE UNIT 1: A 6436 I TAS List: $2185
SPECIFY THRESHOLD HEIGHT MUDSET
Handed by SEAT L/R OR CENTER
Reinforced for Standard Accessories
BASE UNIT OPTIONAL ACCESSORIES List:
FINISHES
STANDARD FINISH- PREMIUM CAST ACRYLIC: WHITE, BONE, BISCUIT $0
GRAB BARS
L-BAR 37" x 33" x 1.5" SMOOTH SS RADIUS $216
L-BAR 37" x 33" x 1.25" SMOOTH WHITE RADIUS $335
FULL DEPTH OF STALL SEATS
(ADAAG 1991-2002)
SEAT 34.5" X 21" FRAMELESS WHITE HDPE RAD FOLD UP $747
SEAT 34.5" X 21" FRAMELESS WHITE PADDED RAD FOLD UP $747
SEAT 34.5" X 21" FRAMELESS WOODGRAIN PHENOLIC RAD FOLD UP $747
FACTORY MODIFICATIONS
MOD VALVE DRILLING - SPECIFY HOLE SIZE $56
MOD INSTALL STANDARD SYMMONS VALVE PACKAGE $633
MOD INSTALL HANS GROHE THERMOSTATIC VALVE PACKAGE (XLT) $501
MOD INSTALL POWERS VALVE PACKAGE (XLT) $656
MOD INSTALL 30" SLIDE BAR / HS KIT $411
MOD 2" BF THRESHOLD $0
MOD .75" NO RECESS BF THRESHOLD $111
MOD ARMORSHIELD P3 PROTECTION $149
CURTAIN RODS
ROD 1" OD 20 GAUGE SS GROMMET STYLE $71
ROD 1" OD 20 GAUGE WHITE GROMMET STYLE $138
FIELD INSTALLED ACCESSORIES
LOOSE CURTAIN PREMIUM 66" X 72" WHITE NYLON WTD $180
LOOSE CURTAIN HEAVY DUTY 66" X 72" WHITE VINYL WTD $119
ADDITIONAL ACCESSORIES AND SERVICES MAY BE AVAILABLE UPON REQUEST
TAS Roll-In Shower Threshold Requirements:
.75” NO RECESS THRESHOLD
LESS EASY BASE
MUD SET REQUIRED
R
EQUIRES .75”
F
INISHED FLOOR TO
M
EET ADA
.75” NO RECESS THRESHOLD
WITH EASY BASE
NO MUD SET REQUIRED
R
EQUIRES .75”
F
INISHED FLOOR TO
M
EET ADA
M
UD SET REQUIRED
1
.25” RECESS THRESHOLD
LESS EASY BASE
REQUIRES 1.25”
RECESSED FLOOR TO
M
EET ADA
MUD SET REQUIRED
2
.0” RECESS THRESHOLD
LESS EASY BASE
ADA ROLL-IN SHOWER THRESHOLD REQUIREMENT
REQUIRES 2.0”
RECESSED FLOOR TO
MEET ADA
NO CURB ALLOWED
NO CURB ALLOWED
NO CURB ALLOWED
NO CURB ALLOWED
FLOOR
FLOOR
FLOOR
FLOOR
SHOWER
S
HOWER
S
HOWER
S
HOWER
ADHESIVE REQUIRED
.75” NO RECESS THRESHOLD
LESS EASY BASE
MUD SET REQUIRED
R
EQUIRES .75”
F
INISHED FLOOR TO
M
EET ADA
.
75” NO RECESS THRESHOLD
W
ITH EASY BASE
N
O MUD SET REQUIRED
REQUIRES .75”
FINISHED FLOOR TO
MEET ADA
MUD SET REQUIRED
1.25” RECESS THRESHOLD
LESS EASY BASE
REQUIRES 1.25”
RECESSED FLOOR TO
MEET ADA
MUD SET REQUIRED
2.0” RECESS THRESHOLD
LESS EASY BASE
ADA ROLL-IN SHOWER THRESHOLD REQUIREMENT
REQUIRES 2.0”
RECESSED FLOOR TO
MEET ADA
NO CURB ALLOWED
NO CURB ALLOWED
NO CURB ALLOWED
NO CURB ALLOWED
FLOOR
FLOOR
FLOOR
FLOOR
SHOWER
SHOWER
SHOWER
SHOWER
ADHESIVE REQUIRED
HDPE (high density polyethylene) seats used by Praxis Companies, LLC contain recycled materials.
Hamilton Bathware/Praxis Companies, LLC.
435 Industrial Road, Savannah • Tennessee 38372 • Customer Service: 800.326.5489 • Fax: 888.246.0466 • www.hamiltonbathware.com
Product Availability
Hamilton Northeast
XLT-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton Mid-America
XL
T-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton South
STD-ST
ANDARD LEADTIME
Commercial Showers & Tub Showers
64” Acrylic Shower
PACKAGE ONE - TAS A 6436 IBS TAS
A
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
B
CD
37”
64
1
”
4
18” 18
UPC/SKU NUMBERS
:etaD:dengiS
Contact Phone Number:
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
Praxis Quality Installation Assurance Program Information: Phone: (800)-759-7744 ext: 29.
Customer Service: (800)-443-7269 Fax: (731)-925-0379
This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.
Important installation procedures MUST be followed for the fixture to be granted a warranty.
ANSI Z124.2
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
3”
4
Right Hand Valve:
CONTRACTOR
CONTRACTOR
TAS COMPLIANCE REQUIREMENTS
For TAS compliance with seat: Installed accessories must include: L-shaped fold up seat, horizontal L-grab bar, pressure balanc-
ing mixing valve, hand held shower with slide bar (on back wall within reach of seated user), vacuum breaker and 60” hose. Unit
and accessories must be installed per TAS and Praxis guidelines.
Durable cast acrylic finish
Low threshold entry
Molded accessory shelf
Integral dome
HDPE fold up seat
Stainless steel grab bars
Stainless steel curtain rod
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR
IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY
INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.
ATTENTION PLUMBING CONTRACTOR!!!
10” Diameter x 1/2” Deep
Recess Around Drain Core
Unit must be installed into
a recessed pit -or- build up
finished floor to comply with
TAS threshold guidelines.
No modifications accepted (Packaged units only)
TEXAS ACCESSIBILLITY
STANDARD CODE
TAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
ICC/ANSI A117.1
HUD/ADA
UFAS
Special Notes: This unit complies with MAS, ANSI Z124.2, NAHB, UPC, ASTM F462, ASTM E84.
Warranty: Gelcoat models have a 3 year limited warranty. Acrylic models have a 5 year limited warranty.
Pumps, parts, and accessories 1 year limited warranty. For further details please refer to the complete
warranty section.
Due to the nature of the materials, dimensions may vary +
/ -
1/2”
.
DRAWING REQUEST MUST BE MADE FOR PACKAGE 2 DRAWING AND
BULIT TO ORDER UNITS.
701C rev. 09/25/07
A 6436 I MAS
OD: 64.5” x 36.25” x 82.75”
ID: 60” x 36” CENTER POINT
WEIGHT: 255
LOAD FACTOR: 2
HANDED BY: SEAT L/R
A 6436 IBS MAS
PHOTOGRAPH AT LEFT
ILLUSTRATES PACKAGE ONE
(HANDED BY SEAT LEFT)
Premium Cast Acrylic
Five Year Warranty
Primary Applications:
• Healthcare
• College Dormitory
• Hospitality
• Schools
MAS Roll-In Showers ONE-PIECE DOMED ACRYLIC
7
01C-
NO MODIFICATIONS TO PACKAGES. FOR BUILT TO ORDER UNIT, SELECT BASE UNIT AND ACCESSORIES.
PKG ONE-MAS: A 6436 IBS MAS List: $3243
.75" NO RECESS BF THRESHOLD MUDSET
H
anded by Seat L/R WHITE PREMIUM CAST ACRYLIC
Factory Installed Accessories (VALVE/SHOWER KIT NOT INCLUDED IN PKG1)
L
-BAR 37" x 33" x 1.25" PEENED SS RADIUS
SEAT 32" X 21" FRAMELESS WHITE PADDED RAD FOLD UP
ROD 1" OD 20 GAUGE SS GROMMET STYLE
FOR MAS COMPLIANCE WITH SEAT: NO CURB ALLOWED, INSTALLED ACCESSORIES MUST INCLUDE: PEENED OR
TEXTURED L-BAR, PADDED L-SEAT, PRESSURE BALANCING MIXING VALVE, HAND HELD SHOWER WITH SLIDE BAR
(BACK WALL, WITH IN REACH OF SEATED USER), VACUUM BREAKER AND 60" HOSE. UNIT AND ACCESSORIES
INSTALLED PER MAS & PRAXIS INSTALLATION & WARRANTY GUIDELINES.
BUILD TO ORDER BASE PLUS ACCESSORIES
BASE UNIT 1: A 6436 I MAS List: $2187
SPECIFY THRESHOLD HEIGHT MUDSET
Handed by SEAT L/R
Reinforced for Standard Accessories
BASE UNIT OPTIONAL ACCESSORIES List:
FINISHES
STANDARD FINISH- PREMIUM CAST ACRYLIC: WHITE, BONE, BISCUIT $0
GRAB BARS
L-BAR 37" x 33" x 1.25" PEENED SS RADIUS $237
L-BAR 37" x 33" x 1.25" TEXTURED WHITE RADIUS $342
INSIDE CURTAIN LINE SEATS
(REVISED ADA-ABA 2004)
SEAT 32" X 21" FRAMELESS WHITE PADDED RAD FOLD UP $747
SEAT 32" X 14.5" WHITE PADDED W/LEGS (Bariatrics) $1281
FACTORY MODIFICATIONS
MOD VALVE DRILLING - SPECIFY HOLE SIZE $56
MOD INSTALL STANDARD SYMMONS VALVE PACKAGE $633
MOD INSTALL HANS GROHE THERMOSTATIC VALVE PACKAGE (XLT) $501
MOD INSTALL POWERS VALVE PACKAGE (XLT) $656
MOD INSTALL 30" SLIDE BAR / HS KIT $411
MOD 2" BF THRESHOLD $0
MOD .75" NO RECESS BF THRESHOLD $111
MOD ARMORSHIELD P3 PROTECTION $149
CURTAIN RODS
ROD 1" OD 20 GAUGE SS GROMMET STYLE $71
ROD 1" OD 20 GAUGE WHITE GROMMET STYLE $138
FIELD INSTALLED ACCESSORIES
LOOSE CURTAIN PREMIUM 66" X 72" WHITE NYLON WTD $180
LOOSE CURTAIN HEAVY DUTY 66" X 72" WHITE VINYL WTD $119
ADDITIONAL ACCESSORIES AND SERVICES MAY BE AVAILABLE UPON REQUEST
MAS Roll-In Shower Threshold Requirements:
.
75” NO RECESS THRESHOLD
L
ESS EASY BASE
M
UD SET REQUIRED
REQUIRES .75”
FINISHED FLOOR TO
MEET ADA
.
75” NO RECESS THRESHOLD
WITH EASY BASE
N
O MUD SET REQUIRED
REQUIRES .75”
F
INISHED FLOOR TO
MEET ADA
MUD SET REQUIRED
1.25” RECESS THRESHOLD
LESS EASY BASE
R
EQUIRES 1.25”
R
ECESSED FLOOR TO
M
EET ADA
MUD SET REQUIRED
2.0” RECESS THRESHOLD
L
ESS EASY BASE
ADA ROLL-IN SHOWER THRESHOLD REQUIREMENT
REQUIRES 2.0”
RECESSED FLOOR TO
MEET ADA
NO CURB ALLOWED
NO CURB ALLOWED
NO CURB ALLOWED
NO CURB ALLOWED
FLOOR
FLOOR
FLOOR
FLOOR
SHOWER
S
HOWER
S
HOWER
S
HOWER
ADHESIVE REQUIRED
.75” NO RECESS THRESHOLD
LESS EASY BASE
MUD SET REQUIRED
R
EQUIRES .75”
F
INISHED FLOOR TO
M
EET ADA
.
75” NO RECESS THRESHOLD
W
ITH EASY BASE
N
O MUD SET REQUIRED
REQUIRES .75”
FINISHED FLOOR TO
MEET ADA
MUD SET REQUIRED
1
.25” RECESS THRESHOLD
LESS EASY BASE
REQUIRES 1.25”
RECESSED FLOOR TO
MEET ADA
MUD SET REQUIRED
2.0” RECESS THRESHOLD
LESS EASY BASE
ADA ROLL-IN SHOWER THRESHOLD REQUIREMENT
REQUIRES 2.0”
RECESSED FLOOR TO
MEET ADA
NO CURB ALLOWED
NO CURB ALLOWED
NO CURB ALLOWED
NO CURB ALLOWED
FLOOR
FLOOR
FLOOR
FLOOR
SHOWER
SHOWER
SHOWER
SHOWER
ADHESIVE REQUIRED
Hamilton Bathware/Praxis Companies, LLC.
435 Industrial Road, Savannah • Tennessee 38372 • Customer Service: 800.326.5489 • Fax: 888.246.0466 • www.hamiltonbathware.com
Product Availability
Hamilton Northeast
XLT-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton Mid-America
XL
T-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton South
STD-ST
ANDARD LEADTIME
Commercial Showers & Tub Showers
64” Acrylic Shower
PACKAGE ONE - MAS A 6436 IBS MAS
A
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
B
CD
36
64
1
”
1
”
44
18” 18
UPC/SKU NUMBERS
:etaD:dengiS
Contact Phone Number:
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
Praxis Quality Installation Assurance Program Information: Phone: (800)-759-7744 ext: 29.
Customer Service: (800)-443-7269 Fax: (731)-925-0379
This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.
Important installation procedures MUST be followed for the fixture to be granted a warranty.
ANSI Z124.2
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
3”
4
Right Hand Valve:
CONTRACTOR
CONTRACTOR
MAS COMPLIANCE REQUIREMENTS
For MAS compliance with seat: Installed accessories must include: L-shaped padded fold up seat, horizontal L-grab bar,
pressure balancing mixing valve, hand held shower with 30” slide bar (on back wall within reach of seated user), vacuum breaker
and 60” hose. Unit and accessories must be installed per MAS and Praxis guidelines.
Durable cast acrylic finish
Low threshold entry
Molded accessory shelf
Integral dome
Padded fold up seat
Stainless steel grab bar
Stainless steel curtain rod
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR
IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY
INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.
ATTENTION PLUMBING CONTRACTOR!!!
10” Diameter x 1/2” Deep
Recess Around Drain Core
Unit must be installed into
a recessed pit -or- build up
finished floor to comply with
MAS threshold guidelines.
N
o modifications accepted (Packaged units only)
MASSACHUSETTS
ARCHITECTURAL
ACCESS BOARD
MAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
WELL INFORMATION
WELL DEPTH: 12”
WELL L TO R: 48”
WELL FRONT TO BACK: 22.5”
GALLONS TO OVERFLOW: 62
SLOPE OF DRAIN: .375” per ft.
Special Notes: This unit complies with ANSI Z124.1, ICC/ ANSI A117.1, UPC, HUD,ASTM F462, ASTM E84, ADA, ABA, SBCCI, NAHB.
Warranty: Gelcoat models have a 3 year limited warranty. Acrylic models have a 5 year limited warranty. Pumps, parts, and accessories 1 year limited warranty.
For further details please refer to the complete warranty section.
Due to the nature of the materials, dimensions may vary
+
/ -
1/2”
.
DRAWING REQUEST MUST BE MADE FOR PACKAGE 2 DRAWING AND BULIT TO ORDER UNITS.
702A rev. 09/25/07
A 6032 TS I
OD: 60” x 33” x 84”
2.5” ABOVE FLOOR ROUGH
WEIGHT: 225
LOAD FACTOR: 1.26
HANDED BY: VALVE WALL L/R
A 6032 TS IBS
PHOTOGRAPH AT LEFT
ILLUSTRATES PACKAGE ONE
(HANDED BY VALVE WALL RIGHT)
Premium Cast Acrylic
Five Year Warranty
Primary Applications:
• Healthcare
• College Dormitory
• Hospitality
• Schools
ADA Tub Showers ONE-PIECE DOMED ACRYLIC
702A- NO MODIFICATIONS TO PACKAGES. FOR BUILT TO ORDER UNIT, SELECT BASE UNIT AND ACCESSORIES.
PKG ONE-ADA/ANSI/TAS: A 6032 TS IBS List: $ 3016
18" Apron SHIM
Handed by Valve Wall L/R WHITE PREMIUM CAST ACRYLIC
Factory Installed Accessories (VALVE/SHOWER KIT NOT INCLUDED IN PKG1)
S-BAR 24” X 1.5” SMOOTH SS
S-BAR 24" X 1.5" SMOOTH SS
S-BAR 24" X 1.5" SMOOTH SS
S-BAR 24" X 1.5" SMOOTH SS
S-BAR 24" X 1.5" SMOOTH SS
ROD 1" OD 20 GAUGE SS GROMMET STYLE
SEAT 27" X 15" WOODGRAIN PHENOLIC FOLD UP
FOR ADA/ANSI/TAS COMPLIANCE: SEAT AT HEAD END OF TUB SHALL BE PROVIDED AND PERMANENTLY AND
SECURELY MOUNTED, INSTALLED ACCESSORIES MUST INCLUDE: 24” VERTICAL GRAB BAR ON VALVE WALL, 24"
GRAB BAR ON VALVE WALL, TWO 24" GRAB BARS ON BACK WALL, 12" MIN. GRAB BAR ON HEAD WALL,
PRESSURE BALANCING MIXING VALVE, HAND HELD SHOWER WITH SLIDE BAR, VACUUM BREAKER AND 60"
HOSE. UNIT AND ACCESSORIES INSTALLED PER ADA/ANSI/TAS AND PRAXIS INSTALLATION AND WARRANTY
GUIDELINES.
BUILD TO ORDER BASE PLUS ACCESSORIES
BASE UNIT 1: A 6032 TS I List: $1824
18" Apron SHIM
Handed by Valve Wall L/R
Reinforced for Standard Accessories
BASE UNIT OPTIONAL ACCESSORIES List:
FINISHES
STANDARD FINISH- PREMIUM CAST ACRYLIC: WHITE, BONE, BISCUIT $0
GRAB BARS
S-BAR 24" X 1.5" SMOOTH SS $128
S-BAR 24" X 1.25" SMOOTH WHITE $154
STANDARD SEATS (ATTACHED OR REMOVABLE)
SEAT 27" X 15" WOODGRAIN PHENOLIC FOLD UP (NOT AVAILABLE WITH 48” S-BAR) $481
SEAT 28" X 15" WHITE TRI FOLD REMOVABLE $434
FACTORY MODIFICATIONS
MOD WHIRLPOOL SYSTEM WITH 3/4 HORSE POWER AND 4 JETS $562
MOD VALVE DRILLING - SPECIFY HOLE SIZE $56
MOD INSTALL STANDARD SYMMONS VALVE PACKAGE $633
MOD INSTALL HANS GROHE THERMOSTATIC VALVE PACKAGE (XLT) $501
MOD INSTALL POWERS VALVE PACKAGE (XLT) $656
MOD INSTALL 30" SLIDE BAR / HS KIT $411
MOD 1.5" STANDARD ROUGH (17" APRON) $56
CURTAIN RODS
ROD 1" OD 20 GAUGE SS GROMMET STYLE $71
ROD 1" OD 20 GAUGE WHITE GROMMET STYLE $138
ROD 5’x 1" OD 20 GAUGE CHROME CURVED WITH BRACKETS $148
FIELD INSTALLED ACCESSORIES
LOOSE CURTAIN HEAVY DUTY 66" X 72" WHITE VINYL $119
ADDITIONAL ACCESSORIES AND SERVICES MAY BE AVAILABLE UPON REQUEST
Hamilton Bathware/Praxis Companies, LLC.
435 Industrial Road, Savannah • Tennessee 38372 • Customer Service: 800.326.5489 • Fax: 888.246.0466 • www.hamiltonbathware.com
Product Availability
Hamilton Northeast
XLT-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton Mid-America
XL
T-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton South
STD-ST
ANDARD LEADTIME
Commercial Showers & Tub Showers
60” Acrylic Tub Shower
PACKAGE ONE - ADA/ANSI/TAS A 6032 TS IBS
A
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
ADA CODES
B
C
D
60
33”
18
Durable acrylic finish
One piece design
Accessory shelves
Phenolic fold up seat
Stainless steel grab bars
Stainless steel curtain rod
UPC/SKU NUMBERS
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
ANSI Z124.1
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
ICC/ANSI A117.1
HUD/ADA
UFAS
TAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
1”
1”
4
4
14
3”
4
Right Hand Valve:
For ADA/TAS compliance: seat securely mounted at head end, one horizontal grab bar mounted on the valve wall, two horizontal
grab bars mounted on the back wall, one horizontal grab bar mounted on the head wall and one vertical grab bar mounted on the
valve wall near the entry. Pressure balancing mixing valve, hand held shower with slide bar, vacuum breaker and 60” hose. Unit and
accessories must be installed per ADA/TAS and Praxis guidlines.
ADA/TAS COMPLIANCE REQUIREMENTS
6” x 6” minimum opening
in floor for drain
connection
No modifications accepted (Packaged units only)
:etaD:dengiS
Contact Phone Number:
CONTRACTOR
CONTRACTOR
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS
PROVIDED.
ATTENTION PLUMBING CONTRACTOR!!!
Customer Service: (800)-443-7269 Fax: (731)-925-0379
WELL INFORMATION
WELL DEPTH: 12”
WELL L TO R: 48”
WELL FRONT TO BACK: 22.5”
GALLONS TO OVERFLOW: 62
SLOPE OF DRAIN: .375” per ft.
Special Notes: This unit complies with MAS, ANSI Z124.1, UPC, NAHB, ASTM F462, ASTM E84.
Warranty: Gelcoat models have a 3 year limited warranty. Acrylic models have a 5 year limited warranty.
Pumps, parts, and accessories 1 year limited warranty. For further details please refer to the complete
warranty section.
Due to the nature of the materials, dimensions may vary +
/ -
1/2”
.
DRAWING REQUEST MUST BE MADE FOR PACKAGE 2 DRAWING AND
BULIT TO ORDER UNITS.
702B rev. 09/25/07
A 6032 TS IBS MAS
OD: 60” x 33” x 84”
2.5” ABOVE FLOOR ROUGH
WEIGHT: 225
LOAD FACTOR: 1.26
HANDED BY: VALVE WALL L/R
A 6032 TS IBS MAS
PHOTOGRAPH AT LEFT
ILLUSTRATES PACKAGE ONE
(HANDED BY VALVE WALL RIGHT)
Premium Cast Acrylic
Five Year Warranty
Primary Applications:
• Healthcare
• College Dormitory
• Hospitality
• Schools
• Assisted Living
MAS Tub Showers ONE-PIECE DOMED ACRYLIC
702B- NO MODIFICATIONS TO PACKAGES. FOR BUILT TO ORDER UNIT, SELECT BASE UNIT AND ACCESSORIES.
PKG ONE-MAS: A 6032 TS IBS MAS List: $2569
18" Apron SHIM
Handed by Valve Wall L/R WHITE PREMIUM CAST ACRYLIC
F
actory Installed Accessories (VALVE/SHOWER KIT NOT INCLUDED IN PKG1)
S
-BAR 48" X 1.25" PEENED SS
S-BAR 48" X 1.25" PEENED SS
SEAT 28" X 15" WHITE TRI FOLD REMOVABLE
ROD 1" OD 20 GAUGE SS GROMMET STYLE
FOR MAS COMPLIANCE: SEAT AT HEAD END OF TUB SHALL BE PROVIDED AND SECURELY MOUNTED, INSTALLED
ACCESSORIES MUST INCLUDE: TWO 48" GRAB BARS ON BACK WALL, PRESSURE BALANCING MIXING VALVE,
HAND HELD SHOWER WITH SLIDE BAR, VACUUM BREAKER AND 60" HOSE. THE UNIT AND ACCESSORIES MUST
BE INSTALLED PER MAS & PRAXIS INSTALLATION & WARRANTY GUIDELINES.
BUILD TO ORDER BASE PLUS ACCESSORIES
BASE UNIT 1: A 6032 TS I MAS List: $1785
18" Apron SHIM
Handed by Valve Wall L/R
Reinforced for Standard Accessories
BASE UNIT OPTIONAL ACCESSORIES List:
FINISHES
STANDARD FINISH- PREMIUM CAST ACRYLIC: WHITE, BONE, BISCUIT $0
GRAB BARS
S-BAR 48" X 1.25" PEENED SS $139
S-BAR 48" X 1.25" TEXTURED WHITE $329
STANDARD SEATS (REMOVABLE)
SEAT 28" X 15" WHITE TRI FOLD REMOVABLE $434
FACTORY MODIFICATIONS
MOD WHIRLPOOL SYSTEM WITH 3/4 HORSE POWER AND 4 JETS $562
MOD VALVE DRILLING - SPECIFY HOLE SIZE $56
MOD INSTALL STANDARD SYMMONS VALVE PACKAGE $633
MOD INSTALL HANS GROHE THERMOSTATIC VALVE PACKAGE (XLT) $501
MOD INSTALL POWERS VALVE PACKAGE (XLT) $656
MOD INSTALL 30" SLIDE BAR / HS KIT $411
MOD 1.5" STANDARD ROUGH (17" APRON) $56
FIELD INSTALLED ACCESSORIES
LOOSE CURTAIN HEAVY DUTY 66" X 72" WHITE VINYL $119
CURTAIN RODS
ROD 1" OD 20 GAUGE SS GROMMET STYLE $71
ROD 1" OD 20 GAUGE WHITE GROMMET STYLE $138
ROD 5” x 1" OD 20 GAUGE CHROME CURVED WITH BRACKETS $148
ADDITIONAL ACCESSORIES AND SERVICES MAY BE AVAILABLE UPON REQUEST
Hamilton Bathware/Praxis Companies, LLC.
435 Industrial Road, Savannah • Tennessee 38372 • Customer Service: 800.326.5489 • Fax: 888.246.0466 • www.hamiltonbathware.com
Product Availability
Hamilton Northeast
XLT-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton Mid-America
XL
T-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton South
STD-ST
ANDARD LEADTIME
Commercial Showers & Tub Showers
60” Acrylic Tub Shower
For MAS compliance installed accessories must include: Removable seat at head end, two peened horizontal grab bars on the back
wall, pressure balancing mixing valve, hand held shower with 30” slide bar, vacuum breaker and 60” hose. Unit and accessories
must be installed per MAS and Praxis guidlines.
PACKAGE ONE - MAS S 6032 TS MAS
A
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
B
CD
33”
60
14
Durable acrylic finish
One piece design
Accessory shelves
Removable seat
Stainless steel grab bars
Stainless steel curtain rod
UPC/SKU NUMBERS
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
ANSI Z124.1
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
1”
3”
4
4
18
1”
4
Right Hand Valve:
MAS COMPLIANCE REQUIREMENTS
6” x 6” minimum opening
in floor for drain
connection
No modifications accepted (Packaged units only)
MASSACHUSETTS
ARCHITECTURAL
ACCESS BOARD
MAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
:etaD:dengiS
Contact Phone Number:
CONTRACTOR
CONTRACTOR
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS
PROVIDED.
ATTENTION PLUMBING CONTRACTOR!!!
Customer Service: (800)-443-7269 Fax: (731)-925-0379
703A rev. 09/25/07
A 4136 I
OD: 41.25” x 36.25” x 82.75”
ID: 36” X 36” CENTER POINT
WEIGHT: 160
LOAD FACTOR: 1.06
HANDED BY: VALVE WALL L/R
Special Notes: This unit complies with ANSI Z124.2, ICC/ ANSI A117.1, ASTM F463, ASTM E84, UPC, HUD, ADA, ABA, SBCCI, NAHB.
Warranty: Gelcoat models have a 3 year limited warranty. Acrylic models have a 5 year limited warranty. Pumps, parts, and accessories 1 year limited warranty.
For further details please refer to the complete warranty section.
Due to the nature of the materials, dimensions may vary +
/ -
1/2”
.
DRAWING REQUEST MUST BE MADE FOR PACKAGE 2 DRAWING AND BULIT TO ORDER UNITS.
.75” NO RECESS THRESHOLD
L
ESS EASY BASE
MUD SET REQUIRED
REQUIRES 1/4”
FINISHED FLOOR TO
MEET ADA
1/2” MAX CURB
A
LLOWED
SHOWER
FLOOR
ADA Transfer Shower Threshold Requirements:
2
.0 RECESS THRESHOLD
LESS EASY BASE
REQUIRES 1.50” RECESS
TO MEET ADA
MUD SET REQUIRED
1/2” MAX CURB
ALLOWED
S
HOWER
FLOOR
A 4136 IBS
PHOTOGRAPH AT LEFT
ILLUSTRATES PACKAGE ONE
(HANDED BY VALVE WALL LEFT)
Premium Cast Acrylic
Five Year Warranty
Primary Applications:
• Healthcare
• College Dormitory
• Hospitality
• Schools
• Public Buildings
A
DA Transfer Showers
ONE-PIECE DOMED ACRYLIC
703A- NO MODIFICATIONS TO PACKAGES. FOR BUILT TO ORDER UNIT, SELECT BASE UNIT AND ACCESSORIES.
PKG ONE - ADA/ANSI: A 4136 IBS List: $2874
.
75" NO RECESS BF THRESHOLD MUDSET
Handed by Valve Wall L/R WHITE PREMIUM CAST ACRYLIC
Factory Installed Accessories (VALVE/SHOWER KIT NOT INCLUDED IN PKG1)
L-BAR 33.5" x 18" x 1.5" SMOOTH SS RADIUS
S-BAR 24" x 1.5" SMOOTH SS
SEAT
32" X 21" FRAMELESS HDPE RAD FOLD UP
ROD 1" OD 20 GAUGE SS GROMMET STYLE
FOR ADA COMPLIANCE, INSTALLED ACCESSORIES MUST INCLUDE L-BAR AND VERTICAL S-BAR, L-SEAT,
PRESSURE BALANCING MIXING VALVE, HAND-HELD SHOWER WITH SLIDE BAR, VACUUM BREAKER AND
60” HOSE. UNIT AND ACCESSORIES INSTALLED PER ADA/ANSI AND PRAXIS INSTALLATION & WARRANTY
GUIDELINES.
BUILD TO ORDER BASE PLUS ACCESSORIES
BASE UNIT 1: A 4136 I List: $1741
SPECIFY THRESHOLD HEIGHT MUDSET
Handed by Valve Wall L/R
Reinforced for Standard Accessories
BASE UNIT OPTIONAL ACCESSORIES
List:
FINISHES
STANDARD FINISH- PREMIUM CAST ACRYLIC: WHITE, BONE, BISCUIT $0
GRAB BARS
S-BAR 24" x 1.5" SMOOTH SS $128
S-B
AR 24" x 1.25" SMOOTH WHITE CC $154
L
-B
AR 33.5" x 18" x 1.5" SMOOTH SS RADIUS $198
L
-B
AR 33.5" x 18" x 1.25" SMOOTH WHITE RADIUS $343
INSIDE CURTAIN LINE SEATS (REVISED ADA-ABA 2004)
SEAT 32" X 21" FRAMELESS WHITE HDPE RAD FOLD UP $747
SEAT
32" X 21" FRAMELESS WHITE PADDED RAD FOLD UP $747
SEA
T
32" X 21" FRAMELESS WOODGRAIN PHENOLIC RAD FOLD UP $747
SEA
T
32" X 14.5" PADDED W/LEGS (Bariatrics) $1281
SEA
T
ACRYLIC MOLDED SEAT $100
F
ACTORY MODIFICATIONS
MOD
V
ALVE DRILLING - SPECIFY HOLE SIZE $56
MOD
.75" N
O RECESS BF THRESHOLD
$111
MOD
2" BF THRESHOLD
$0
MOD ARMORSHIELD P3 PR
OTECTION $149
MOD INS
TALL 30" SLIDE BAR / HS KIT $411
MOD INSTALL STANDARD SYMMONS VALVE PACKAGE $633
MOD INSTALL HANS GROHE THERMOSTATIC VALVE PACKAGE (XLT) $501
MOD INSTALL POWERS VALVE PACKAGE (XLT) $656
MOD RECESSED RECEIVER FLANGE-WILL ADD 2” TO OVERALL PRODUCT WIDTH $222
CURTAIN RODS
ROD 1" OD 20 GAUGE SS GROMMET STYLE $71
ROD 1" OD 20 GAUGE WHITE GROMMET STYLE $138
FIELD INSTALLED ACCESSORIES
LOOSE CURTAIN PREMIUM 42" X 72" WHITE NYLON WTD $118
LOOSE CURTAIN HEAVY DUTY 42" X 72" WHITE VINYL WTD $96
ADDITIONAL ACCESSORIES AND SERVICES MAY BE AVAILABLE UPON REQUEST
HDPE (high density polyethylene) seats used by Praxis Companies, LLC contain recycled materials.
Hamilton Bathware/Praxis Companies, LLC.
435 Industrial Road, Savannah • Tennessee 38372 • Customer Service: 800.326.5489 • Fax: 888.246.0466 • www.hamiltonbathware.com
Product Availability
Hamilton Northeast
XLT-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton Mid-America
XL
T-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton South
STD-ST
ANDARD LEADTIME
Commercial Showers & Tub Showers
41” Acrylic Shower
For ADA compliance, unit must be configured with L-shaped fold up seat, horizontal L-grab bar, vertical grab bar near the entry,
pressure balancing mixing valve, hand held shower with slide bar, vacuum breaker and 60” hose. Unit must be installed so thresh-
old is no more than 1/2” above the finished floor. Unit and accessories must be installed per ADA and Praxis guidelines.
PACKAGE ONE - ADA/ANSI A 4136 IBS
N
o modifications accepted (Packaged units only)
A
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
ADA CODES
B
CD
41
10” Diameter x 1/2” Deep
Recess Around Drain Core
Unit must be installed into
a recessed pit -or- build up
finished floor to comply with
ADA threshold guidelines.
36
18
18”
Durable cast acrylic finish
Low threshold entry
Corner accessory shelf
Integral dome
HDPE fold up seat
Stainless steel grab bars
Stainless steel curtain rod
UPC/SKU NUMBERS
:etaD:dengiS
Contact Phone Number:
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
Praxis Quality Installation Assurance Program Information: Phone: (800)-759-7744 ext: 29.
Customer Service: (800)-443-7269 Fax: (731)-925-0379
This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.
Important installation procedures MUST be followed for the fixture to be granted a warranty.
ANSI Z124.2
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
ICC/ANSI A117.1
HUD/ADA
UFAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
1”
1”
1”
4
2
4
Right Hand Valve:
CONTRACTOR
CONTRACTOR
ADA COMPLIANCE REQUIREMENTS
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR
IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY
INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.
ATTENTION PLUMBING CONTRACTOR!!!
Recessed receiver flange to allow drywall flush
t
o unit. (Optional feature will add 2” to the
overall width of the product.)
*
*With optional recess receiver flange, add 2”
703B rev. 09/25/07
A 4136 I TAS
OD: 41.25” x 36.25” x 82.75”
ID: 36” X 36” CENTER POINT
WEIGHT: 160
LOAD FACTOR: 1.06
HANDED BY: VALVE WALL L/R
A 4136 IBS TAS
PHOTOGRAPH AT LEFT
ILLUSTRATES PACKAGE ONE
(HANDED BY VALVE WALL LEFT)
Premium Cast Acrylic
Five Year Warranty
Primary Applications:
• Healthcare
• College Dormitory
• Hospitality
• Schools
• Public Buildings
Special Notes: This unit complies with TAS, ANSI Z124.2, ICC/ANSI A117.1, UPC, HUD, ASTM F462, ASTM E84, ADA, ABA, BOCA, SBCCI, NAHB
Warranty: Gelcoat models have a 3 year limited warranty. Acrylic models have a 5 year limited warranty. Pumps, parts, and accessories 1 year limited
warranty. For further details please refer to the complete warranty section.
Due to the nature of the materials, dimensions may vary +
/ -
1/2”
.
DRAWING REQUEST MUST BE MADE FOR PACKAGE 2 DRAWING AND BULIT TO ORDER UNITS.
TAS Transfer Showers ONE-PIECE DOMED ACRYLIC
703B- NO MODIFICATIONS TO PACKAGES. FOR BUILT TO ORDER UNIT, SELECT BASE UNIT AND ACCESSORIES.
P
KG ONE - TAS: A 4136 IBS TAS List: $2861
.75" NO RECESS BF THRESHOLD MUDSET
Handed by Valve Wall L/R WHITE PREMIUM CAST ACRYLIC
Factory Installed Accessories (VALVE/SHOWER KIT NOT INCLUDED IN PKG1)
L-BAR 33.5" x 18" x 1.5" SMOOTH SS RADIUS
S-BAR 24" x 1.5" SMOOTH SS
SEAT 34.5" X 21" FRAMELESS WHITE HDPE RAD FOLD UP
ROD 1" OD 20 GAUGE SS GROMMET STYLE
FOR TAS COMPLIANCE, UNIT REQUIRES RETURN RECEIVER FLANGE TO MEET OPEN FLOOR SPACE AND
UNOBSTRUCTED TRANSFER; AND INSTALLED ACCESSORIES MUST INCLUDE L-BAR AND VERTICAL S-BAR,
34.5” L-SEAT, PRESSURE BALANCING MIXING VALVE, HAND-HELD SHOWER WITH SLIDE BAR, VACUUM
BREAKER AND 60” HOSE. UNIT AND ACCESSORIES INSTALLED PER TAS AND PRAXIS INSTALLATION &
WARRANTY GUIDELINES.
BUILD TO ORDER BASE PLUS ACCESSORIES
BASE UNIT 1: A 4136 I TAS List: $1729
SPECIFY THRESHOLD HEIGHT MUDSET
Handed by Valve Wall L/R
Reinforced for Standard Accessories
BASE UNIT OPTIONAL ACCESSORIES List:
FINISHES
STANDARD FINISH- PREMIUM CAST ACRYLIC: WHITE, BONE, BISCUIT $0
GRAB BARS
S-BAR
24" x 1.5" SMOOTH SS $117
S-B
AR
24" x 1.25" SMOOTH WHITE CC $154
L
-B
AR 33.5" x 18" x 1.5" SMOOTH SS RADIUS $198
L-BAR 33.5" x 18" x 1.25" SMOOTH WHITE RADIUS $343
FULL DEPTH OF STALL SEATS
(ADAAG 1991-2002)
SEA
T
34.5" X 21" FRAMELESS WHITE HDPE RAD FOLD UP $747
SEA
T
34.5" X 21" FRAMELESS WHITE PADDED RAD FOLD UP $747
SEA
T
34.5" X 21" FRAMELESS WOODGRAIN PHENOLIC RAD FOLD UP $747
F
ACTOR
Y MODIFICATIONS
MOD V
ALVE DRILLING - SPECIFY HOLE SIZE $56
MOD
.75" N
O RECESS BF THRESHOLD $111
MOD
2" BF THRESHOLD
$0
MOD
ARMORSHIELD P3 PROTECTION $149
MOD
INSTALL 30" SLIDE BAR / HS KIT $411
MOD
INS
TALL STANDARD SYMMONS VALVE PACKAGE $633
MOD INSTALL HANS GROHE THERMOSTATIC VALVE PACKAGE (XLT) $501
MOD INSTALL POWERS VALVE PACKAGE (XLT) $656
MOD RECESSED RECEIVER FLANGE-WILL ADD 2” TO OVERALL PRODUCT WIDTH $222
CURTAIN RODS
ROD 1" OD 20 GAUGE SS GROMMET STYLE $71
ROD 1" OD 20 GAUGE WHITE GROMMET STYLE $138
FIELD INSTALLED ACCESSORIES
LOOSE CURTAIN PREMIUM 42" X 72" WHITE NYLON WTD $118
LOOSE CURTAIN HEAVY DUTY 42" X 72" WHITE VINYL WTD $96
ADDITIONAL ACCESSORIES AND SERVICES MAY BE AVAILABLE UPON REQUEST
.75” NO RECESS THRESHOLD
L
ESS EASY BASE
MUD SET REQUIRED
REQUIRES 1/4”
FINISHED FLOOR TO
MEET ADA
1/2” MAX CURB
A
LLOWED
SHOWER
FLOOR
ADA Transfer Shower Threshold Requirements:
2
.0 RECESS THRESHOLD
LESS EASY BASE
REQUIRES 1.50” RECESS
TO MEET ADA
MUD SET REQUIRED
1/2” MAX CURB
ALLOWED
SHOWER
FLOOR
Hamilton Bathware/Praxis Companies, LLC.
435 Industrial Road, Savannah • Tennessee 38372 • Customer Service: 800.326.5489 • Fax: 888.246.0466 • www.hamiltonbathware.com
Product Availability
Hamilton Northeast
XLT-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton Mid-America
XL
T-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton South
STD-ST
ANDARD LEADTIME
Commercial Showers & Tub Showers
41” Acrylic Shower
For TAS/ANSI compliance, unit requires return receiver flange to meet open floor space and unobstructed transfer. installed acces-
sories must include L-grab bar and vertical S-grab bar, L-shaped fold up seat, pressure balancing mixing valve, hand-held shower
with slide bar, vacuum breaker and 60” hose. Unit must be installed so threshold is no more than 1/2” above the finished floor.
Unit and accessiories must be installed per TAS/ANSI and Praxis Guidelines.
PACKAGE ONE - TAS/ANSI A 4136 IBS TAS
A
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
TEXAS ACCESSIBILLITY
STANDARD CODE
B
CD
41
10” Diameter x 1/2” Deep
Recess Around Drain Core
Unit must be installed into
a recessed pit -or- build up
finished floor to comply with
TAS threshold guidelines.
36
18
18”
Durable cast acrylic finish
Low threshold entry
Corner accessory shelf
Integral dome
Molded receiver flange
HDPE fold up seat
Stainless steel curtain rod
Stainless steel grab bars
UPC/SKU NUMBERS
:etaD:dengiS
Contact Phone Number:
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
Praxis Quality Installation Assurance Program Information: Phone: (800)-759-7744 ext: 29.
Customer Service: (800)-443-7269 Fax: (731)-925-0379
This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.
Important installation procedures MUST be followed for the fixture to be granted a warranty.
ANSI Z124.2
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
TAS
Left Hand Valve:
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
1”
1”
1”
4
2
4
Right Hand Valve:
CONTRACTOR
CONTRACTOR
TAS/ANSI COMPLIANCE REQUIREMENTS
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR
IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY
INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.
ATTENTION PLUMBING CONTRACTOR!!!
No modifications accepted (Packaged units only)
ICC/ANSI A117.1
HUD/ADA
UFAS
Recessed receiver flange to allow drywall flush
to unit. (Optional feature will add 2” to the
o
verall width of the product.)
*
*With optional recess receiver flange, add 2”
703C rev. 09/25/07
A 4136 I MAS
OD: 41.25” x 36.25” x 82.75”
ID: 36” X 36” CENTER POINT
WEIGHT: 160
LOAD FACTOR: 1.06
HANDED BY: VALVE WALL L/R
A 4136 IBS MAS
PHOTOGRAPH AT LEFT
ILLUSTRATES PACKAGE ONE
(HANDED BY VALVE WALL LEFT)
Premium Cast Acrylic
Five Year Warranty
Primary Applications:
• Healthcare
• College Dormitory
• Hospitality
• Schools
• Public Buildings
Special Notes: This unit complies with MAS, ANSI Z124.2, NAHB, UPC, ASTM F462, ASTM E84.
Warranty: Gelcoat models have a 3 year limited warranty. Acrylic models have a 5 year limited warranty.
Pumps, parts, and accessories 1 year limited warranty. For further details please refer to the complete warranty section.
Due to the nature of the materials, dimensions may vary +
/ -
1/2”
.
DRAWING REQUEST MUST BE MADE FOR PACKAGE 2 DRAWING AND BULIT TO ORDER UNITS.
M
AS Transfer Showers
ONE-PIECE DOMED ACRYLIC
703C- NO MODIFICATIONS TO PACKAGES. FOR BUILT TO ORDER UNIT, SELECT BASE UNIT AND ACCESSORIES.
PKG ONE - MAS: A 4136 IBS MAS List: $2701
.75" NO RECESS BF THRESHOLD MUDSET
Handed by Valve Wall L/R WHITE PREMIUM CAST ACRYLIC
Factory Installed Accessories (VALVE/SHOWER KIT NOT INCLUDED IN PKG1)
L-BAR 33.5" x 18" x 1.25" PEENED SS RADIUS
SEAT 32" X 21" FRAMELESS WHITE PADDED RAD FOLD UP
R
OD 1" OD 20 GAUGE SS GROMMET STYLE
FOR MAS COMPLIANCE, INSTALLED ACCESSORIES MUST INCLUDE PEENED OR TEXTURED L-BAR,
PADDED L-SEAT, PRESSURE BALANCING MIXING VALVE, HAND-HELD SHOWER WITH SLIDE BAR, VACUUM
BREAKER AND 60” HOSE. UNIT AND ACCESSORIES INSTALLED PER MAS AND PRAXIS INSTALLATION &
WARRANTY GUIDELINES.
BUILD TO ORDER BASE PLUS ACCESSORIES
BASE UNIT 1: A 4136 I MAS List: $1715
SPECIFY THRESHOLD HEIGHT MUDSET
Handed by Valve Wall L/R
Reinforced for Standard Accessories
BASE UNIT OPTIONAL ACCESSORIES List:
FINISHES
STANDARD FINISH- PREMIUM CAST ACRYLIC: WHITE, BONE, BISCUIT $0
GRAB BARS
L-BAR 33.5" x 18" x 1.25" PEENED SS RADIUS $168
L
-B
AR 33.5" x 18" x 1.25" TEXTURED WHITE RADIUS $349
INSIDE CUR
T
AIN LINE SEATS
(REVISED AD
A
-ABA 2004)
SEA
T
32" X 21" FRAMELESS WHITE PADDED RAD FOLD UP $747
SEAT 32" X 14.5" WHITE PADDED W/LEGS $1281
FACTORY MODIFICATIONS
MOD VALVE DRILLING - SPECIFY HOLE SIZE $56
MOD
.75" N
O RECESS BF THRESHOLD $111
MOD
2" BF THRESHOLD
$0
MOD ARMORSHIELD P3 PR
OTECTION $149
MOD INS
TALL 30" SLIDE BAR / HS KIT $411
MOD
INS
TALL STANDARD SYMMONS VALVE PACKAGE $633
MOD
INS
TALL HANS GROHE THERMOSTATIC VALVE PACKAGE (XLT) $501
MOD INS
TALL POWERS VALVE PACKAGE (XLT) $656
MOD RECESSED RECEIVER FL
ANGE-WILL ADD 2” TO OVERALL PRODUCT WIDTH $222
CUR
T
AIN RODS
R
OD 1" OD 20 GAUGE SS GROMMET STYLE $71
ROD 1" OD 20 GAUGE WHITE GROMMET STYLE $138
FIELD INSTALLED ACCESSORIES
LOOSE CURTAIN PREMIUM 42" X 72" WHITE NYLON WTD $118
LOOSE CURTAIN HEAVY DUTY 42" X 72" WHITE VINYL WTD $96
ADDITIONAL ACCESSORIES AND SERVICES MAY BE AVAILABLE UPON REQUEST
.75” NO RECESS THRESHOLD
L
ESS EASY BASE
MUD SET REQUIRED
REQUIRES 1/4”
FINISHED FLOOR TO
MEET ADA
1/2” MAX CURB
A
LLOWED
SHOWER
FLOOR
MAS Transfer Shower Threshold Requirements:
2.0 RECESS THRESHOLD
LESS EASY BASE
R
EQUIRES 1.50” RECESS
TO MEET ADA
M
UD SET REQUIRED
1
/2” MAX CURB
ALLOWED
SHOWER
FLOOR
Hamilton Bathware/Praxis Companies, LLC.
435 Industrial Road, Savannah • Tennessee 38372 • Customer Service: 800.326.5489 • Fax: 888.246.0466 • www.hamiltonbathware.com
Product Availability
Hamilton Northeast
XLT-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton Mid-America
XL
T-EXTENDED LEADTIME
Pr
oduct Availability
Hamilton South
STD-ST
ANDARD LEADTIME
Commercial Showers & Tub Showers
41” Acrylic Shower
For MAS compliance, installed accessories must include peened L-grab bar, padded fold up seat, pressure balancing mixing valve,
hand-held shower with 30” slide bar, vacuum breaker and 60” hose. Unit must be installed so threshold is no more than 1/2” above
the finished floor. Unit and accessiories must be installed per MAS and Praxis Guidelines.
PACKAGE ONE - MAS A 4136 IBS MAS
A
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
MASSACHUSETTS
ARCHITECTURAL
ACCESS BOARD
B
CD
10” Diameter x 1/2” Deep
Recess Around Drain Core
Unit must be installed into
a recessed pit -or- build up
finished floor to comply with
MAS threshold guidelines.
36
18
18”
Durable cast acrylic finish
Low threshold entry
Corner accessory shelf
Integral dome
Padded fold up seat
Stainless steel curtain rod
Stainless steel grab bars
UPC/SKU NUMBERS
:etaD:dengiS
Contact Phone Number:
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
Praxis Quality Installation Assurance Program Information: Phone: (800)-759-7744 ext: 29.
Customer Service: (800)-443-7269 Fax: (731)-925-0379
This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.
Important installation procedures MUST be followed for the fixture to be granted a warranty.
ANSI Z124.2
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
MAS
Left Hand Valve:
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
1”
1”
4
4
41
1”
2
Right Hand Valve:
CONTRACTOR
CONTRACTOR
MAS COMPLIANCE REQUIREMENTS
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR
IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY
INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.
ATTENTION PLUMBING CONTRACTOR!!!
No modifications accepted (Packaged units only)
Recessed receiver flange to allow drywall flush
to unit. (Optional feature will add 2” to the
overall width of the product.)
*
*With optional recess receiver flange, add 2”
WELL INFORMATION
WELL DEPTH: 11.25”
WELL L TO R: 48”
WELL FRONT TO BACK: 22.5”
GALLONS TO OVERFLOW: 58
SLOPE OF DRAIN: .375” per ft.
Special Notes: This unit complies with ANSI Z124.1, ICC/ ANSI A117.1, UPC, HUD, ASTM F462, ASTM E84, ADA, ABA, SBCCI, NAHB, UFAS.
Warranty: Gelcoat models have a 3 year limited warranty. Acrylic models have a 5 year limited warranty. Pumps, parts, and accessories 1 year limited warranty.
For further details please refer to the complete warranty section. Due to the nature of the materials, dimensions may vary
+
/ -
1/2”
.
DRAWING REQUEST MUST BE MADE FOR PACKAGE 2 DRAWING AND BULIT TO ORDER UNITS.
704A rev. 09/25/07
G 6092 TS I
OD: 60” x 32.25” x 77.5”
3” ABOVE FLOOR ROUGH
WEIGHT: 170
LOAD FACTOR: 1.13
HANDED BY: VALVE WALL L/R
G 6092 TS IBS
PHOTOGRAPH AT LEFT
ILLUSTRATES PACKAGE ONE
(HANDED BY VALVE WALL LEFT)
Sanitary Grade Polyester
Gelcoat
Three Year Warranty
Primary Applications:
• Healthcare
• College Dormitory
• Hospitality
• Schools
• Assisted Living
ADA Tub Showers ONE-PIECE OPEN TOP GELCOAT
7
04A-
NO MODIFICATIONS TO PACKAGES. FOR BUILT TO ORDER UNIT, SELECT BASE UNIT AND ACCESSORIES.
P
KG ONE-ADA/ANSI/TAS: G 6092 TS IBS List: $1945
1
8“ APRON SHIM
HANDED BY VALVE WALL L/R WHITE POLYESTER GELCOAT FINISH
Factory Installed Accessories (VALVE/SHOWER KIT NOT INCLUDED IN PKG1)
S-BAR 24” X 1.5” SMOOTH SS
S-BAR 24" X 1.5" SMOOTH SS
S-BAR 24" X 1.5" SMOOTH SS
S-BAR 24" X 1.5" SMOOTH SS
S-BAR 24" X 1.5" SMOOTH SS
SEAT 27" X 15" WOODGRAIN PHENOLIC FOLD UP
FOR ADA/ANSI/TAS COMPLIANCE: SEAT AT HEAD END OF TUB SHALL BE PROVIDED AND PERMANENTLY AND
SECURELY MOUNTED, INSTALLED ACCESSORIES MUST INCLUDE: 24” VERTICAL GRAB BAR ON VALVE WALL, 24"
GRAB BAR ON VALVE WALL, TWO 24" GRAB BARS ON BACK WALL, 12" MIN. GRAB BAR ON HEAD WALL,
PRESSURE BALANCING MIXING VALVE, HAND HELD SHOWER WITH SLIDE BAR, VACUUM BREAKER AND 60"
HOSE. THE UNIT AND ACCESSORIES MUST BE INSTALLED PER ADA/ANSI/TAS AND PRAXIS INSTALLATION AND
WARRANTY GUIDELINES.
BUILD TO ORDER BASE PLUS ACCESSORIES
BASE UNIT 1: G 6092 TS I List: $824
18“ APRON SHIM
Handed by Valve Wall L/R
Reinforced for Standard Accessories
BASE UNIT OPTIONAL ACCESSORIES List:
FINISHES
STANDARD FINISH- POLYESTER GELCOAT FINISH: WHITE, BONE, BISCUIT $0
GRAB BARS
S-BAR 24" X 1.5" SMOOTH SS $128
S-BAR 24" X 1.25" SMOOTH WHITE $154
STANDARD SEATS (ATTACHED OR REMOVABLE)
SEAT 27" X 15" WOODGRAIN PHENOLIC FOLD UP ATTACHED $481
SEAT 28" X 15" WHITE TRI FOLD REMOVABLE $434
FACTORY MODIFICATIONS
MOD WHIRLPOOL SYSTEM WITH 3/4 HORSE POWER AND 4 JETS $562
MOD VALVE DRILLING - SPECIFY HOLE SIZE $56
MOD INSTALL STANDARD SYMMONS VALVE PACKAGE $633
MOD INSTALL HANS GROHE THERMOSTATIC VALVE PACKAGE (XLT) $501
MOD INSTALL POWERS VALVE PACKAGE (XLT) $656
MOD INSTALL 30" SLIDE BAR / HS KIT $411
MOD ARMORSHIELD P3 PROTECTION $149
MOD TUBGUARD P3 PROTECTION 60" TUB SHOWER $86
MOD 2" STANDARD ROUGH (17" APRON) $56
CURTAIN RODS
ROD CURTAIN ROD U CUP HOLDER PAIR $14
ROD 1" OD 20 GAUGE SS $71
ROD 1" OD 20 GAUGE WHITE $138
FIELD INSTALLED ACCESSORIES
LOOSE CURTAIN HEAVY DUTY 66" X 72" WHITE VINYL $119
LOOSE TUBGUARD P3 PRO FIELD INST - STANDARD 60" TUB SHOWER $89
ADDITIONAL ACCESSORIES AND SERVICES MAY BE AVAILABLE UPON REQUEST
Hamilton Bathware/Praxis Companies, LLC.
435 Industrial Road, Savannah • Tennessee 38372 • Customer Service: 800.326.5489 • Fax: 888.246.0466 • www.hamiltonbathware.com
Product Availability
Hamilton Northeast
NA-NOT AVAILABLE
*SEE UNIT G 3260 TS IBS
Pr
oduct Availability
Hamilton Mid-America
NA-NOT A
VAILABLE
*SEE UNIT G 3260 TS IBS
Pr
oduct Availability
Hamilton South
800-326-5489
STD-ST
ANDARD LEADTIME
Commercial Showers & Tub Showers
60” Gelcoat Tub Shower
No modifications accepted (Packaged units only)
PACKAGE ONE - ADA/ANSI/TAS G 6092 TS IBS
A
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
ADA CODES
B
CD
32
60
15
16
High gloss gelcoat finish
One piece design
Phenolic fold up seat
Stainless steel grab bars
UPC/SKU NUMBERS
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
ANSI Z124.1
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
ICC/ANSI A117.1
HUD/ADA
UFAS
TAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
1”
3”
1”
1”
4
4
2
4
Right Hand Valve:
For ADA/TAS compliance: seat securely mounted at head end, one horizontal grab bar mounted on the valve wall, two horizontal
grab bars mounted on the back wall, one horizontal grab bar mounted on the head wall and one vertical grab bar mounted on the
valve wall near the entry. Pressure balancing mixing valve, hand held shower with slide bar, vacuum breaker and 60” hose. Unit and
accessories must be installed per ADA/TAS and Praxis guidlines.
ADA/TAS COMPLIANCE REQUIREMENTS
6” x 6” minimum opening
in floor for drain
connection
:etaD:dengiS
Contact Phone Number:
CONTRACTOR
CONTRACTOR
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS
PROVIDED.
ATTENTION PLUMBING CONTRACTOR!!!
Customer Service: (800)-443-7269 Fax: (731)-925-0379
WELL INFORMATION
WELL DEPTH: 11.25”
WELL L TO R: 48”
WELL FRONT TO BACK: 22.5”
GALLONS TO OVERFLOW: 58
SLOPE OF DRAIN: .375” per ft.
Special Notes: This unit complies with MAS, ANSI Z124.1, NAHB, UPC, ASTM F462, ASTM E84.
Warranty: Gelcoat models have a 3 year limited warranty. Acrylic models have a 5 year limited warranty. Pumps, parts, and accessories 1 year limited warranty.
For further details please refer to the complete warranty section.
Due to the nature of the materials, dimensions may vary
+
/ -
1/2”
.
DRAWING REQUEST MUST BE MADE FOR PACKAGE 2 DRAWING AND BULIT TO ORDER UNITS.
704B rev. 09/25/07
G 6092 TS I MAS
OD: 60” x 32.25” x 77.5”
3” ABOVE FLOOR ROUGH
WEIGHT: 170
LOAD FACTOR: 1.13
HANDED BY: VALVE WALL L/R
G 6092 TS IBS
MAS
P
HOTOGRAPH AT LEFT
ILLUSTRATES PACKAGE ONE
(HANDED BY VALVE WALL LEFT)
Sanitary Grade Polyester
Gelcoat
Three Year Warranty
Primary Applications:
• Healthcare
• College Dormitory
• Hospitality
• Schools
• Assisted Living
M
AS Tub Showers
ONE-PIECE OPEN TOP GELCOAT
704B- NO MODIFICATIONS TO PACKAGES. FOR BUILT TO ORDER UNIT, SELECT BASE UNIT AND ACCESSORIES.
PKG ONE-MAS: G 6092 TS IBS MAS List: $1490
18“ APRON SHIM
HANDED BY VALVE WALL L/R WHITE POLYESTER GELCOAT FINISH
F
actory Installed Accessories (VALVE/SHOWER KIT NOT INCLUDED IN PKG1)
S
-BAR 48" X 1.25" PEENED SS
S-BAR 48" X 1.25" PEENED SS
S
EAT 28" X 15" WHITE TRI FOLD REMOVABLE
FOR MAS COMPLIANCE: TRI FOLD REMOVABLE SEAT AT HEAD END OF TUB SHALL BE PROVIDED AND SECURELY
MOUNTED, INSTALLED ACCESSORIES MUST INCLUDE: TWO 48" PEENED OR TEXTURED GRAB BARS ON BACK
WALL, PRESSURE BALANCING MIXING VALVE, HAND HELD SHOWER WITH SLIDE BAR, VACUUM BREAKER AND
60" HOSE. UNIT AND ACCESSORIES INSTALLED PER MAS & PRAXIS INSTALLATION & WARRANTY GUIDELINES.
BUILD TO ORDER BASE PLUS ACCESSORIES
BASE UNIT 1: G 6092 TS I MAS List: $777
18“ APRON SHIM
Handed by Valve Wall L/R
Reinforced for Standard Accessories
BASE UNIT OPTIONAL ACCESSORIES List:
FINISHES
STANDARD FINISH- POLYESTER GELCOAT FINISH: WHITE, BONE, BISCUIT $0
GRAB BARS
S-BAR 48" X 1.25" PEENED SS $139
S-BAR 48" X 1.25" TEXTURED WHITE $329
STANDARD SEATS (REMOVABLE)
SEAT 28" X 15" WHITE TRI FOLD REMOVABLE $434
FACTORY MODIFICATIONS
MOD WHIRLPOOL SYSTEM WITH 3/4 HORSE POWER AND 4 JETS $562
MOD VALVE DRILLING - SPECIFY HOLE SIZE $56
MOD INSTALL STANDARD SYMMONS VALVE PACKAGE $633
MOD INSTALL HANS GROHE THERMOSTATIC VALVE PACKAGE (XLT) $501
MOD INSTALL POWERS VALVE PACKAGE (XLT) $656
MOD INSTALL 30" SLIDE BAR / HS KIT $411
MOD ARMORSHIELD P3 PROTECTION $149
MOD TUBGUARD P3 PROTECTION 60" TUB SHOWER $86
MOD 2" STANDARD ROUGH (17" APRON) $56
CURTAIN RODS
ROD CURTAIN ROD U CUP HOLDER PAIR $14
ROD 1" OD 20 GAUGE SS $71
ROD 1" OD 20 GAUGE WHITE $138
FIELD INSTALLED ACCESSORIES
LOOSE CURTAIN HEAVY DUTY 66" X 72" WHITE VINYL $119
LOOSE TUBGUARD P3 PRO FIELD INST - STANDARD 60" TUB SHOWER $89
ADDITIONAL ACCESSORIES AND SERVICES MAY BE AVAILABLE UPON REQUEST
Hamilton Bathware/Praxis Companies, LLC.
435 Industrial Road, Savannah • Tennessee 38372 • Customer Service: 800.326.5489 • Fax: 888.246.0466 • www.hamiltonbathware.com
Product Availability
Hamilton Northeast
NA-NOT AVAILABLE
*SEE UNIT G 3260 TS IBS
Pr
oduct Availability
Hamilton Mid-America
NA-NOT A
VAILABLE
*SEE UNIT G 3260 TS IBS
Pr
oduct Availability
Hamilton South
STD-ST
ANDARD LEADTIME
Commercial Showers & Tub Showers
60” Gelcoat Tub/Shower
N
o modifications accepted (Packaged units only)
PACKAGE ONE - MAS G 6092 TS IBS MAS
A
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
B
CD
32
60
15
16
High gloss gelcoat finish
One piece design
Tri-fold Removable seat
Stainless steel grab bars
UPC/SKU NUMBERS
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
ANSI Z124.1
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
1”
3”
1”
1”
4
4
4
4
Right Hand Valve:
MAS COMPLIANCE REQUIREMENTS
6” x 6” minimum opening
in floor for drain
connection
MASSACHUSETTS
ARCHITECTURAL
ACCESS BOARD
MAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
For MAS compliance installed accessories must include: Removable seat at head end, two peened horizontal grab bars on the back
wall, pressure balancing mixing valve, hand held shower with 30” slide bar, vacuum breaker and 60” hose. Unit and accessories
must be installed per MAS and Praxis guidlines.
:etaD:dengiS
Contact Phone Number:
CONTRACTOR
CONTRACTOR
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS
PROVIDED.
ATTENTION PLUMBING CONTRACTOR!!!
Customer Service: (800)-443-7269 Fax: (731)-925-0379
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

Hamilton Electronics A 6436 IBS User manual

Brand
Hamilton Electronics
Model
A 6436 IBS
Category
Sanitary ware
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents