IEI Integration ECW-281B/B2-N270 User manual

ECW-281B-945GSE Embedded System

Page i

ECW-281B/281B2-R20 Embedded System

MODEL:

EC

W

-281B/281B2-R20

IEI Intel

®

AtomFanless Embedded System

RoHS Compliant, Dual GbE LAN, COM Ports, USB 2.0

Rev. 2.00 5 November, 2010

User Manual

ECW-281B-945GSE Embedded System

Page ii

Revision

Date Version

Changes

5 November, 2010 2.00 Updated for R20 version

17 March, 2009 1.01 Changed model name

10 February, 2009 1.00 Initial release

ECW-281B-945GSE Embedded System

Page iii

Copyright

COPYRIGHT NOTICE

The information in this document is subject to change without prior notice in order to

improve reliability, design and function and does not represent a commitment on the part

of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use the product or

documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights are

reserved. No part of this manual may be reproduced by any mechanical, electronic, or

other means in any form without prior written permission of the manufacturer.

TRADEMARKS

All registered trademarks and product names mentioned herein are used for identification

purposes only and may be trademarks and/or registered trademarks of their respective

owners.

ECW-281B-945GSE Embedded System

Page iv

Table of Contents

0H0H0H1 INTRODUCTION.......................................................................................................... 384H384H384H1

1H1H1H1.1 OVERVIEW.................................................................................................................. 385H385H385H2

2H2H2H1.1.1 Benefits............................................................................................................... 386H386H386H2

3H3H3H1.1.2 Features ............................................................................................................. 387H387H387H2

4H4H4H1.2 MODEL VARIATIONS ................................................................................................... 388H388H388H3

5H5H5H1.3 TECHNICAL SPECIFICATIONS ...................................................................................... 389H389H389H4

6H6H6H1.4 POWER MODULE SPECIFICATIONS .............................................................................. 390H390H390H5

7H7H7H1.4.1 Power Module Options...................................................................................... 391H391H391H5

8H8H8H1.4.2 Power Module Specifications ............................................................................ 392H392H392H6

9H9H9H1.5 POWER ADAPTER ....................................................................................................... 393H393H393H7

10H10H10H2 MECHANICAL DESCRIPTION................................................................................. 394H394H394H8

11H11H11H2.1 MECHANICAL OVERVIEW ........................................................................................... 395H395H395H9

12H12H12H2.2 PHYSICAL DIMENSIONS .............................................................................................. 396H396H396H9

13H13H13H2.2.1 System Dimensions............................................................................................. 397H397H397H9

14H14H14H2.2.2 Motherboard Dimensions ................................................................................ 398H398H398H10

15H15H15H2.2.3 Power Module Dimensions...............................................................................399H399H399H11

16H16H16H2.3 EXTERNAL OVERVIEW.............................................................................................. 400H400H400H12

17H17H17H2.3.1 Front Panel...................................................................................................... 401H401H401H12

18H18H18H2.3.2 Rear Panel ....................................................................................................... 402H402H402H12

19H19H19H2.3.2.1 ECW-281B-R20 Rear Panel ..................................................................... 403H403H403H12

20H20H20H2.3.2.2 ECW-281B2-R20 Rear Panel ................................................................... 404H404H404H13

21H21H21H2.3.3 Bottom Surface................................................................................................. 405H405H405H14

22H22H22H2.4 INTERNAL OVERVIEW............................................................................................... 406H406H406H15

23H23H23H3 SYSTEM COMPONENTS ......................................................................................... 407H407H407H17

24H24H24H3.1 EMBEDDED SYSTEM MOTHERBOARD ....................................................................... 408H408H408H18

25H25H25H3.1.1 WAFER-945GSE Motherboard Overview........................................................ 409H409H409H18

26H26H26H3.1.2 CPU Support.................................................................................................... 410H410H410H19

27H27H27H3.2 PERIPHERAL INTERFACE CONNECTORS..................................................................... 411H411H411H19

28H28H28H3.2.1 Peripheral Interface Connectors ..................................................................... 412H412H412H19

ECW-281B-945GSE Embedded System

Page v

29H29H29H3.3 INTERNAL PERIPHERAL CONNECTORS ...................................................................... 413H413H413H20

30H30H30H3.3.1 ATX Power Connector ..................................................................................... 414H414H414H20

31H31H31H3.3.2 ATX Power Supply Enable Connector............................................................. 415H415H415H21

32H32H32H3.3.3 Audio Connector (10-pin)................................................................................ 416H416H416H22

33H33H33H3.3.4 CompactFlash® Socket.................................................................................... 417H417H417H23

34H34H34H3.3.5 LED Connector................................................................................................ 418H418H418H24

35H35H35H3.3.6 PCIe Mini Card Slot ........................................................................................ 419H419H419H25

36H36H36H3.3.7 Power Button Connector.................................................................................. 420H420H420H27

37H37H37H3.3.8 Reset Button Connector ................................................................................... 421H421H421H28

38H38H38H3.3.9 SATA Drive Connectors ................................................................................... 422H422H422H28

39H39H39H3.3.10 Serial Port Connector (COM3, COM4, COM5 and COM6)......................... 423H423H423H29

40H40H40H3.3.11 Serial Port Connector (COM 2)(RS-232, RS-422 or RS-485)....................... 424H424H424H31

41H41H41H3.3.12 USB Connectors (Internal)............................................................................ 425H425H425H32

42H42H42H3.4 EXTERNAL PERIPHERAL INTERFACE CONNECTOR PANEL ......................................... 426H426H426H33

43H43H43H3.4.1 LAN Connectors............................................................................................... 427H427H427H34

44H44H44H3.4.2 Serial Port Connector (COM1) ....................................................................... 428H428H428H35

45H45H45H3.4.3 USB Connectors............................................................................................... 429H429H429H36

46H46H46H3.4.4 VGA Connector................................................................................................ 430H430H430H36

47H47H47H3.5 WAFER-945GSE MOTHERBOARD ON-BOARD JUMPERS ......................................... 431H431H431H37

48H48H48H3.5.1 CF Card Setup ................................................................................................. 432H432H432H38

49H49H49H3.5.2 Clear CMOS Jumper........................................................................................ 433H433H433H38

50H50H50H3.5.3 COM 2 Function Select Jumper (ECW-281B-R20 Series Only)...................... 434H434H434H40

51H51H51H3.6 CONNECTOR MAPPINGS ........................................................................................... 435H435H435H41

52H52H52H3.6.1 Power Connector............................................................................................. 436H436H436H41

53H53H53H3.6.2 ATX Mode Connector....................................................................................... 437H437H437H41

54H54H54H4 INSTALLATION ......................................................................................................... 438H438H438H42

55H55H55H4.1 ANTI-STATIC PRECAUTIONS ...................................................................................... 439H439H439H43

56H56H56H4.2 INSTALLATION PROCEDURE ...................................................................................... 440H440H440H43

57H57H57H4.2.1 Installation Procedure Overview ..................................................................... 441H441H441H43

58H58H58H4.2.2 Unpacking........................................................................................................ 442H442H442H44

59H59H59H4.2.3 Bottom Surface Removal.................................................................................. 443H443H443H45

60H60H60H4.2.4 Configure the Jumper Settings......................................................................... 444H444H444H46

61H61H61H4.2.5 Hard Drive Installation.................................................................................... 445H445H445H46

62H62H62H4.2.6 Mounting the System with Mounting Brackets................................................. 446H446H446H49

ECW-281B-945GSE Embedded System

Page vi

63H63H63H4.2.7 Mounting the System with Wall Mount Kit....................................................... 447H447H447H49

64H64H64H4.2.8 DIN Mounting.................................................................................................. 448H448H448H51

65H65H65H4.2.9 Wireless Antenna Installation (Wireless Models Only).................................... 449H449H449H53

66H66H66H4.2.10 Cable Connections......................................................................................... 450H450H450H54

67H67H67H4.3 POWER-ON PROCEDURE........................................................................................... 451H451H451H54

68H68H68H4.3.1 Installation Checklist....................................................................................... 452H452H452H54

69H69H69H4.3.2 Terminal Block Pinouts.................................................................................... 453H453H453H55

70H70H70H4.3.3 Power-on Procedure........................................................................................ 454H454H454H55

71H71H71H5 BIOS SCREENS........................................................................................................... 455H455H455H57

72H72H72H5.1 INTRODUCTION......................................................................................................... 456H456H456H58

73H73H73H5.1.1 Starting Setup................................................................................................... 457H457H457H58

74H74H74H5.1.2 Using Setup...................................................................................................... 458H458H458H58

75H75H75H5.1.3 Getting Help..................................................................................................... 459H459H459H59

76H76H76H5.1.4 Unable to Reboot After Configuration Changes.............................................. 460H460H460H59

77H77H77H5.1.5 BIOS Menu Bar................................................................................................ 461H461H461H59

78H78H78H5.2 MAIN........................................................................................................................ 462H462H462H60

79H79H79H5.3 ADVANCED ............................................................................................................... 463H463H463H61

80H80H80H5.3.1 CPU Configuration.......................................................................................... 464H464H464H62

81H81H81H5.3.2 IDE Configuration........................................................................................... 465H465H465H63

82H82H82H5.3.2.1 IDE Master, IDE Slave ............................................................................. 466H466H466H65

83H83H83H5.3.3 Super IO Configuration ................................................................................... 467H467H467H70

84H84H84H5.3.4 Hardware Health Configuration...................................................................... 468H468H468H73

85H85H85H5.3.5 Power Configuration........................................................................................ 469H469H469H77

86H86H86H5.3.5.1 ACPI configuration ................................................................................... 470H470H470H77

87H87H87H5.3.5.2 APM Configuration................................................................................... 471H471H471H78

88H88H88H5.3.6 Remote Configuration...................................................................................... 472H472H472H81

89H89H89H5.3.7 USB Configuration........................................................................................... 473H473H473H84

90H90H90H5.4 PCI/PNP................................................................................................................... 474H474H474H86

91H91H91H5.5 BOOT........................................................................................................................ 475H475H475H88

92H92H92H5.5.1 Boot Settings Configuration............................................................................. 476H476H476H89

93H93H93H5.5.2 Boot Device Priority........................................................................................ 477H477H477H91

94H94H94H5.6 SECURITY................................................................................................................. 478H478H478H92

95H95H95H5.7 CHIPSET ................................................................................................................... 479H479H479H94

96H96H96H5.7.1 North Bridge Chipset Configuration ............................................................... 480H480H480H94

ECW-281B-945GSE Embedded System

Page vii

97H97H97H5.7.2 SouthBridge Configuration.............................................................................. 481H481H481H98

98H98H98H5.8 EXIT ......................................................................................................................... 482H482H482H99

99H99H99H6 SOFTWARE DRIVERS............................................................................................ 483H483H483H101

100H100H100H6.1 AVAILABLE SOFTWARE DRIVERS ............................................................................ 484H484H484H102

101H101H101H6.2 STARTING THE DRIVER PROGRAM .......................................................................... 485H485H485H102

102H102H102H6.3 CHIPSET DRIVER INSTALLATION............................................................................. 486H486H486H103

103H103H103H6.4 VGA DRIVER INSTALLATION.................................................................................. 487H487H487H107

104H104H104H6.5 LAN DRIVER INSTALLATION ...................................................................................488H488H488H112

105H105H105H6.6 AUDIO DRIVER INSTALLATION ................................................................................489H489H489H114

106H106H106H7 TROUBLESHOOTING AND MAINTENANCE ....................................................490H490H490H118

107H107H107H7.1 ECW-281B/281B2-R20 SYSTEM MAINTENANCE OVERVIEW.................................491H491H491H119

108H108H108H7.2 SYSTEM TROUBLESHOOTING...................................................................................492H492H492H119

109H109H109H7.2.1 The System Doesn’t Turn On...........................................................................493H493H493H119

110H110H110H7.2.2 The System Doesn’t Boot Up.......................................................................... 494H494H494H120

111H111H111H7.2.3 More Troubleshooting.................................................................................... 495H495H495H121

112H112H112H7.3 COMPONENT REPLACEMENT PROCEDURE .............................................................. 496H496H496H121

113H113H113H7.3.1 SO-DIMM Replacement................................................................................. 497H497H497H122

114H114H114HA SAFETY PRECAUTIONS....................................................................................... 498H498H498H124

115H115H115HA.1 SAFETY PRECAUTIONS .......................................................................................... 499H499H499H125

116H116H116HA.1.1 General Safety Precautions........................................................................... 500H500H500H125

117H117H117HA.1.2 Anti-static Precautions.................................................................................. 501H501H501H126

118H118H118HA.2 MAINTENANCE AND CLEANING PRECAUTIONS ...................................................... 502H502H502H126

119H119H119HA.2.1 Maintenance and Cleaning............................................................................ 503H503H503H126

120H120H120HA.2.2 Cleaning Tools............................................................................................... 504H504H504H127

121H121H121HB ONE KEY RECOVERY........................................................................................... 505H505H505H128

122H122H122HB.1 ONE KEY RECOVERY INTRODUCTION .................................................................... 506H506H506H130

123H123H123HB.1.1 System Requirement....................................................................................... 507H507H507H131

124H124H124HB.1.2 Supported Operating System......................................................................... 508H508H508H132

125H125H125HB.2 SETUP PROCEDURE FOR WINDOWS........................................................................ 509H509H509H133

126H126H126HB.2.1 Hardware and BIOS Setup ............................................................................ 510H510H510H134

127H127H127HB.2.2 Create Partitions ........................................................................................... 511H511H511H134

128H128H128HB.2.3 Install Operating System, Drivers and Applications..................................... 512H512H512H138

ECW-281B-945GSE Embedded System

Page viii

129H129H129HB.2.4 Build-up Recovery Partition.......................................................................... 513H513H513H139

130H130H130HB.2.5 Create Factory Default Image....................................................................... 514H514H514H141

131H131H131HB.3 SETUP PROCEDURE FOR LINUX .............................................................................. 515H515H515H146

132H132H132HB.4 RECOVERY TOOL FUNCTIONS ................................................................................ 516H516H516H149

133H133H133HB.4.1 Factory Restore ............................................................................................. 517H517H517H151

134H134H134HB.4.2 Backup System............................................................................................... 518H518H518H152

135H135H135HB.4.3 Restore Your Last Backup.............................................................................. 519H519H519H153

136H136H136HB.4.4 Manual........................................................................................................... 520H520H520H154

137H137H137HB.5 OTHER INFORMATION ............................................................................................ 521H521H521H155

138H138H138HB.5.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller....................... 522H522H522H155

139H139H139HB.5.2 System Memory Requirement ........................................................................ 523H523H523H157

140H140H140HC BIOS MENU OPTIONS........................................................................................... 524H524H524H158

141H141H141HC.1 BIOS CONFIGURATION OPTIONS ........................................................................... 525H525H525H159

142H142H142HD WATCHDOG TIMER .............................................................................................. 526H526H526H162

ECW-281B-945GSE Embedded System

Page ix

List of Figures

143H143H143HFigure 1-1: ECW-281B/281B2-R20 Series Embedded System...................................................527H527H527H2

144H144H144HFigure 1-2: Power Adapter.............................................................................................................528H528H528H7

145H145H145HFigure 2-1: ECW-281B/281B2-R20 Dimensions (mm)...............................................................529H529H529H10

146H146H146HFigure 2-2: WAFER SBC Dimensions (mm)...............................................................................530H530H530H11

147H147H147HFigure 2-3: Power Module Dimensions (mm) ............................................................................531H531H531H11

148H148H148HFigure 2-4: ECW-281B/281B2-R20 Front Panel..........................................................................532H532H532H12

149H149H149HFigure 2-5: ECW-281B/281B2-R20 Rear Panel...........................................................................533H533H533H13

150H150H150HFigure 2-6: ECW-281B/281B2-R20 Rear Panel...........................................................................534H534H534H14

151H151H151HFigure 2-7: Bottom Surface .........................................................................................................535H535H535H15

152H152H152HFigure 2-8: Internal Overview......................................................................................................536H536H536H16

153H153H153HFigure 3-1: WAFER-945GSE Jumper and Connector Locations .............................................537H537H537H18

154H154H154HFigure 3-2: ATX Power Connector Location..............................................................................538H538H538H21

155H155H155HFigure 3-3: ATX Power Supply Enable Connector Location....................................................539H539H539H22

156H156H156HFigure 3-4: Audio Connector Pinouts (10-pin)...........................................................................540H540H540H22

157H157H157HFigure 3-5: CF Card Socket Location .........................................................................................541H541H541H23

158H158H158HFigure 3-6: LED Connector Locations........................................................................................542H542H542H25

159H159H159HFigure 3-7: PCIe Mini Card Slot Location...................................................................................543H543H543H26

160H160H160HFigure 3-8: Power Button Connector Location..........................................................................544H544H544H27

161H161H161HFigure 3-9: Reset Button Connector Locations.........................................................................545H545H545H28

162H162H162HFigure 3-10: SATA Drive Connector Locations .........................................................................546H546H546H29

163H163H163HFigure 3-11: COM3 to COM6 Connector Pinout Locations.......................................................547H547H547H30

164H164H164HFigure 3-12: RS-232/422/485 Serial Port Connector Location..................................................548H548H548H32

165H165H165HFigure 3-13: USB Connector Pinout Locations.........................................................................549H549H549H33

166H166H166HFigure 3-14: ECW-281B/281B2-R20 External Peripheral Interface Connector.......................550H550H550H34

167H167H167HFigure 3-15: RJ-45 Ethernet Connector......................................................................................551H551H551H34

168H168H168HFigure 3-16: COM1 Pinout Locations..........................................................................................552H552H552H35

169H169H169HFigure 3-17: VGA Connector .......................................................................................................553H553H553H36

170H170H170HFigure 3-18: Jumpers ...................................................................................................................554H554H554H37

171H171H171HFigure 3-19: CF Card Setup Jumper Location...........................................................................555H555H555H38

172H172H172HFigure 3-20: Clear CMOS Jumper ...............................................................................................556H556H556H39

173H173H173HFigure 3-21: COM 2 Function Select Jumper Location.............................................................557H557H557H40

ECW-281B-945GSE Embedded System

Page x

174H174H174HFigure 4-1: Bottom Surface Retention Screws..........................................................................558H558H558H45

175H175H175HFigure 4-2: Hard Drive Bracket....................................................................................................559H559H559H46

176H176H176HFigure 4-3:HDD Bracket Retention Screws................................................................................560H560H560H47

177H177H177HFigure 4-4: HDD Retention Screws.............................................................................................561H561H561H47

178H178H178HFigure 4-5: HDD Thermal Pad......................................................................................................562H562H562H48

179H179H179HFigure 4-6: Mounting Bracket Retention Screws ......................................................................563H563H563H49

180H180H180HFigure 4-7: Wall-mounting Bracket.............................................................................................564H564H564H50

181H181H181HFigure 4-8: Mount the Embedded System..................................................................................565H565H565H51

182H182H182HFigure 4-9: DIN Rail Mounting Bracket.......................................................................................566H566H566H52

183H183H183HFigure 4-10: Screw Locations......................................................................................................567H567H567H52

184H184H184HFigure 4-11: Mounting the DIN RAIL...........................................................................................568H568H568H53

185H185H185HFigure 4-12: Secure the Assembly to the DIN Rail....................................................................569H569H569H53

186H186H186HFigure 4-13: Wireless Antenna Installation................................................................................570H570H570H54

187H187H187HFigure 4-14: Terminal Block Pinouts..........................................................................................571H571H571H55

188H188H188HFigure 4-15: Power Button...........................................................................................................572H572H572H56

189H189H189HFigure 6-1: Drivers..................................................................................................................... 573H573H573H103

190H190H190HFigure 6-2: Chipset Driver Screen............................................................................................ 574H574H574H104

191H191H191HFigure 6-3: Chipset Driver Welcome Screen........................................................................... 575H575H575H104

192H192H192HFigure 6-4: Chipset Driver License Agreement...................................................................... 576H576H576H105

193H193H193HFigure 6-5: Chipset Driver Read Me File ................................................................................. 577H577H577H106

194H194H194HFigure 6-6: Chipset Driver Setup Operations ......................................................................... 578H578H578H106

195H195H195HFigure 6-7: Chipset Driver Installation Finish Screen............................................................ 579H579H579H107

196H196H196HFigure 6-8: VGA Driver Read Me File....................................................................................... 580H580H580H108

197H197H197HFigure 6-9: VGA Driver Setup Files Extracted ........................................................................ 581H581H581H108

198H198H198HFigure 6-10: VGA Driver Welcome Screen.............................................................................. 582H582H582H109

199H199H199HFigure 6-11: VGA Driver License Agreement.......................................................................... 583H583H583H110

200H200H200HFigure 6-12: VGA Driver Read Me File..................................................................................... 584H584H584H110

201H201H201HFigure 6-13: VGA Driver Setup Operations............................................................................. 585H585H585H111

202H202H202HFigure 6-14: VGA Driver Installation Finish Screen............................................................... 586H586H586H111

203H203H203HFigure 6-15: LAN Driver Welcome Screen .............................................................................. 587H587H587H112

204H204H204HFigure 6-16: LAN Driver Welcome Screen .............................................................................. 588H588H588H113

205H205H205HFigure 6-17: LAN Driver Installation ........................................................................................ 589H589H589H113

206H206H206HFigure 6-18: LAN Driver Installation Complete....................................................................... 590H590H590H114

207H207H207HFigure 6-19: Audio Driver Options........................................................................................... 591H591H591H115

208H208H208HFigure 6-20: AC’97 Driver Installation File Extraction............................................................ 592H592H592H115

ECW-281B-945GSE Embedded System

Page xi

209H209H209HFigure 6-21: AC’97 Driver Installation Welcome Screen........................................................ 593H593H593H116

210H210H210HFigure 6-22: AC’97 Driver Installation Verification.............................................................. 594H594H594H116

211H211H211HFigure 6-23: AC’97 Driver Installation...................................................................................... 595H595H595H117

212H212H212HFigure 6-24: AC’97 Driver Installation Complete.................................................................... 596H596H596H117

213H213H213HFigure 7-1: SO-DIMM Cover Plate ............................................................................................ 597H597H597H122

214H214H214HFigure 7-2: SO-DIMM Installation............................................................................................. 598H598H598H123

215H215H215HFigure B-1: IEI One Key Recovery Tool Menu........................................................................ 599H599H599H130

216H216H216HFigure B-2: Launching the Recovery Tool.............................................................................. 600H600H600H135

217H217H217HFigure B-3: Recovery Tool Setup Menu .................................................................................. 601H601H601H135

218H218H218HFigure B-4: Command Mode..................................................................................................... 602H602H602H136

219H219H219HFigure B-5: Partition Creation Commands.............................................................................. 603H603H603H137

220H220H220HFigure B-6: Launching the Recovery Tool.............................................................................. 604H604H604H139

221H221H221HFigure B-7: System Configuration for Windows .................................................................... 605H605H605H139

222H222H222HFigure B-8: Build-up Recovery Partition................................................................................. 606H606H606H140

223H223H223HFigure B-9: Press any key to continue.................................................................................... 607H607H607H140

224H224H224HFigure B-10: Press F3 to Boot into Recovery Mode............................................................... 608H608H608H141

225H225H225HFigure B-11: Recovery Tool Menu ........................................................................................... 609H609H609H141

226H226H226HFigure B-12: About Symantec Ghost Window........................................................................ 610H610H610H142

227H227H227HFigure B-13: Symantec Ghost Path ......................................................................................... 611H611H611H142

228H228H228HFigure B-14: Select a Local Source Drive ............................................................................... 612H612H612H143

229H229H229HFigure B-15: Select a Source Partition from Basic Drive ...................................................... 613H613H613H143

230H230H230HFigure B-16: File Name to Copy Image to ............................................................................... 614H614H614H144

231H231H231HFigure B-17: Compress Image.................................................................................................. 615H615H615H144

232H232H232HFigure B-18: Image Creation Confirmation............................................................................. 616H616H616H145

233H233H233HFigure B-19: Image Creation Process...................................................................................... 617H617H617H145

234H234H234HFigure B-20: Image Creation Complete................................................................................... 618H618H618H145

235H235H235HFigure B-21: Press Any Key to Continue ................................................................................ 619H619H619H146

236H236H236HFigure B-22: Partitions for Linux.............................................................................................. 620H620H620H147

237H237H237HFigure B-23: System Configuration for Linux......................................................................... 621H621H621H148

238H238H238HFigure B-24: Access menu.lst in Linux (Text Mode).............................................................. 622H622H622H148

239H239H239HFigure B-25: Recovery Tool Menu ........................................................................................... 623H623H623H149

240H240H240HFigure B-26: Recovery Tool Main Menu.................................................................................. 624H624H624H150

241H241H241HFigure B-27: Restore Factory Default...................................................................................... 625H625H625H151

242H242H242HFigure B-28: Recovery Complete Window.............................................................................. 626H626H626H151

243H243H243HFigure B-29: Backup System.................................................................................................... 627H627H627H152

ECW-281B-945GSE Embedded System

Page xii

244H244H244HFigure B-30: System Backup Complete Window ................................................................... 628H628H628H152

245H245H245HFigure B-31: Restore Backup................................................................................................... 629H629H629H153

246H246H246HFigure B-32: Restore System Backup Complete Window..................................................... 630H630H630H153

247H247H247HFigure B-33: Symantec Ghost Window ................................................................................... 631H631H631H154

ECW-281B-945GSE Embedded System

Page xiii

List of Tables

248H248H248HTable 1-1: Model Variations...........................................................................................................632H632H632H3

249H249H249HTable 1-2: Technical Specifications..............................................................................................633H633H633H5

250H250H250HTable 1-3: ECW-281B/281B2-R20 Power Module Options..........................................................634H634H634H5

251H251H251HTable 1-4: DC-to-DC Power Module Specifications.....................................................................635H635H635H6

252H252H252HTable 1-5: Power Adapter Specifications.....................................................................................636H636H636H7

253H253H253HTable 3-1: Peripheral Interface Connectors...............................................................................637H637H637H20

254H254H254HTable 3-2: ATX Power Connector Pinouts .................................................................................638H638H638H21

255H255H255HTable 3-3: ATX Power Supply Enable Connector Pinouts .......................................................639H639H639H22

256H256H256HTable 3-4: Audio Connector Pinouts (10-pin) ............................................................................640H640H640H23

257H257H257HTable 3-5: CF Card Socket Pinouts.............................................................................................641H641H641H24

258H258H258HTable 3-6: LED Connector Pinouts .............................................................................................642H642H642H25

259H259H259HTable 3-7: PCIe Mini Card Slot Pinouts ......................................................................................643H643H643H27

260H260H260HTable 3-8: Power Button Connector Pinouts.............................................................................644H644H644H27

261H261H261HTable 3-9: Reset Button Connector Pinouts..............................................................................645H645H645H28

262H262H262HTable 3-10: SATA Drive Connector Pinouts...............................................................................646H646H646H29

263H263H263HTable 3-11: COM3 to COM6 Connector Pinouts ........................................................................647H647H647H31

264H264H264HTable 3-12: RS-232/RS-485 Serial Port Connector Pinouts......................................................648H648H648H32

265H265H265HTable 3-13: USB Port Connector Pinouts...................................................................................649H649H649H33

266H266H266HTable 3-14: LAN Pinouts ..............................................................................................................650H650H650H34

267H267H267HTable 3-15: RJ-45 Ethernet Connector LEDs.............................................................................651H651H651H35

268H268H268HTable 3-16: RS-232 Serial Port (COM 1) Pinouts .......................................................................652H652H652H35

269H269H269HTable 3-17: USB Port Pinouts......................................................................................................653H653H653H36

270H270H270HTable 3-18: VGA Connector Pinouts...........................................................................................654H654H654H37

271H271H271HTable 3-19: Jumpers.....................................................................................................................655H655H655H38

272H272H272HTable 3-20: CF Card Setup Jumper Settings .............................................................................656H656H656H38

273H273H273HTable 3-21: Clear CMOS Jumper Settings..................................................................................657H657H657H39

274H274H274HTable 3-22: COM 2 Function Select Jumper Settings...............................................................658H658H658H40

275H275H275HTable 3-23: Motherboard Power Connector Mapping...............................................................659H659H659H41

276H276H276HTable 3-24: Motherboard Power Connector Mapping...............................................................660H660H660H41

277H277H277HTable 4-1: Package List Contents...............................................................................................661H661H661H45

278H278H278HTable 5-1: BIOS Navigation Keys................................................................................................662H662H662H59

ECW-281B-945GSE Embedded System

Page xiv

ECW-281B-945GSE Embedded System

Page xv

List of BIOS Menus

279H279H279HMenu 1: Main.................................................................................................................................663H663H663H60

280H280H280HMenu 2: Advanced........................................................................................................................664H664H664H62

281H281H281HMenu 3: CPU Configuration.........................................................................................................665H665H665H62

282H282H282HMenu 4: IDE Configuration...........................................................................................................666H666H666H63

283H283H283HMenu 5: IDE Master and IDE Slave Configuration.....................................................................667H667H667H65

284H284H284HMenu 6: Super IO Configuration .................................................................................................668H668H668H70

285H285H285HMenu 7: Hardware Health Configuration....................................................................................669H669H669H74

286H286H286HMenu 8: Power Configuration......................................................................................................670H670H670H77

287H287H287HMenu 9: ACPI Configuration........................................................................................................671H671H671H78

288H288H288HMenu 10:Advanced Power Management Configuration...........................................................672H672H672H79

289H289H289HMenu 11: Remote Access Configuration [Advanced]...............................................................673H673H673H81

290H290H290HMenu 12: USB Configuration.......................................................................................................674H674H674H85

291H291H291HMenu 13: PCI/PnP Configuration ................................................................................................675H675H675H87

292H292H292HMenu 14: Boot...............................................................................................................................676H676H676H89

293H293H293HMenu 15: Boot Settings Configuration.......................................................................................677H677H677H90

294H294H294HMenu 16: Boot Device Priority Settings .....................................................................................678H678H678H92

295H295H295HMenu 17: Security.........................................................................................................................679H679H679H93

296H296H296HMenu 18: Chipset..........................................................................................................................680H680H680H94

297H297H297HMenu 19:North Bridge Chipset Configuration...........................................................................681H681H681H95

298H298H298HMenu 20:SouthBridge Chipset Configuration ...........................................................................682H682H682H98

299H299H299HMenu 21:Exit..................................................................................................................................683H683H683H99

ECW-281B Embedded System

Page 1

Chapter

1

1 Introduction

ECW-281B Embedded System

Page 2

1.1 Overview

Figure 1-1: ECW-281B/281B2-R20 Series Embedded System

There are four WAFER-945GSE Intel® Atom™ based embedded solutions in the

ECW-281B/281B2-R20 series. All fanless motherboards have been optimized for

multimedia applications that require minimum installation space. The WAFER-945GSE

motherboard supports a full range of functions for an AT/ATX-compatible industrial computer.

ECW-281B/281B2-R20 embedded subsystems are all capable of supporting one 2.5” SATA

hard disk drive. The W models also have a built-in 802.11 b/g wireless module.

1.1.1 Benefits

The ECW-281B/281B2-R20 embedded system has the following benefits:

 Easy installation saves installation time

 Complete integration saves solution development time and cost

 Secure storage with one SATA hard drive supported

 Compact size saves space

 Powerful preinstalled Intel® Atom™ N270 CPU and motherboard ensures

rigorous processing needs can be met

1.1.2 Features

The ECW-281B/281B2-R20 has the following features

 RoHS compliant design

 Fanless system

 Built-in DC-to-DC power converter

ECW-281B Embedded System

Page 3

 1.6 GHz Intel® Atom™ N270 CPU supported

 Dual GbE LAN for high speed network applications

 One SATA hard drive supported

 Wall mount and DIN mount supported.

1.2 Model Variations

There are six models in the ECW-281B/281B2-R20 embedded system series. The six

models are all preinstalled with an Intel® Atom™ N270 processor and 1 GB DDR2

memory. The model variations are listed in 684H684H684HTable 1-1 below.

ECW-281B Series Power Wireless

VGA RS-232/422/485

ECW-281B-R20/N270/1GB 12V DC input

(60 W adaptor)

No 1 x VGA 1 x RS-232/422/485

ECW-281BW-R20/N270/1GB 12V DC input

(60 W adaptor)

Yes 1 x VGA 1 x RS-232/422/485

ECW-281BWD-R20/N270/1GB 9V~36V DC input

No 1 x VGA 1 x RS-232/422/485

ECW-281BWDW-R20/N270/1GB 9V~36V DC input

Yes 1 x VGA 1 x RS-232/422/485

ECW-281B2 Series Power Wireless

VGA RS-232/422/485

ECW-281B2-R20/N270/1GB 12V DC input

(60 W adaptor)

No 2 x VGA N/A

ECW-281B2W-R20/N270/1GB 12V DC input

(60 W adaptor)

Yes 2 x VGA N/A

ECW-281B2WD-R20/N270/1GB 9V~36V DC input

No 2 x VGA N/A

ECW-281B2WDW-R20/N270/1GB

9V~36V DC input

Yes 2 x VGA N/A

Table 1-1: Model Variations

ECW-281B Embedded System

Page 4

1.3 Technical Specifications

The specifications for the Intel based embedded systems are listed below.

ECW-281B-R20 ECW-281B2-R20

CPU Preinstalled 1.6 GHz Intel® Atom™ Processor N270 with a

533 MHz FSB

System Chipset Intel® 945GSE + ICH7-M

System Memory Preinstalled 1.0 GB DDR2 SDRAM SO-DIMM (system max. 2 GB)

Ethernet Dual Realtek RTL8111CP GbE controllers

Built-in 802.11 b/g wireless module for the wireless models

Display One VGA port Two VGA port

Serial Port Five RS-232

One RS-232/422/485 (selectable)

Five RS-232

USB Four USB 2.0 ports

Audio One audio out

Storage One 2.5” SATA hard drive supported

One internal CF card slot

Chassis Construction Aluminum Alloy

Power Supply Internal DC-to-DC power converter, input voltage:

12V DC or 9V – 36V (WD series models)

External power adapter, input voltage:

90V AC ~ 264V AC @ 47Hz ~ 63Hz, 60 W

Power Consumption 19 W

Operating Shock Half-sine wave shock 3G; 11ms; 3 shocks per axis

Page is loading ...

IEI Integration ECW-281B/B2-N270 User manual

This manual is also suitable for

IEI Integration ECW-281B/B2-N270 User manual

Related papers

Other documents