Juniper ACX5448-D User manual

Type
User manual

This manual is also suitable for

ACX5448, ACX5448-D, and ACX5448-M
Universal Metro Router Hardware Guide
Published
2019-12-23
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in
the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks
are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right
to change, modify, transfer, or otherwise revise this publication without notice.
ACX5448, ACX5448-D, and ACX5448-M Universal Metro Router Hardware Guide
Copyright © 2019 Juniper Networks, Inc. All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related
limitations through the year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with)
Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement
(“EULA”) posted at https://support.juniper.net/support/eula/. By downloading, installing or using such software, you
agree to the terms and conditions of that EULA.
ii
Table of Contents
About the Documentation | ix
Documentation and Release Notes | ix
Using the Examples in This Manual | ix
Merging a Full Example | x
Merging a Snippet | xi
Documentation Conventions | xi
Documentation Feedback | xiv
Requesting Technical Support | xiv
Self-Help Online Tools and Resources | xv
Creating a Service Request with JTAC | xv
Overview
1
ACX5448, ACX5448-D, and ACX5448-M System Overview | 19
ACX5400 Universal Metro Router Description | 19
Benefits of ACX5400 Routers | 21
ACX5448, ACX5448-D, and ACX5448-M System Overview | 21
ACX5400 Router Models | 25
Field-Replaceable Units in ACX5400 Routers | 26
Hardware Redundancy of ACX5400 Router Components and Functionality | 27
ACX5400 Routers Hardware and CLI Terminology Mapping | 27
ACX5400 System Software Overview | 29
ACX5448, ACX5448-D, and ACX5448-M Chassis | 30
Management Panel of ACX5400 Routers | 30
Port Panel of ACX5400 Routers | 32
Port Panel of an ACX5448 Router | 32
Port Panel of an ACX5448-D Router | 32
Port Panel of an ACX5448-M Router | 36
Chassis Status LEDs on ACX5400 Routers | 37
Management Port LEDs on ACX5400 Routers | 40
Network Port LEDs on ACX5400 Routers | 41
iii
Fan Status LEDs on ACX5400 Routers | 43
Power Supply LEDs on ACX5400 Routers | 44
AC Power Supply LEDs on ACX5400 Routers | 44
DC Power Supply LEDs on ACX5400 Routers | 46
Cooling System and Airflow in ACX5448, ACX5448-D, and ACX5448-M Routers | 47
Fan Modules | 48
Fan Module and Power Supply Requirement | 50
Fan Module Status | 51
ACX5448, ACX5448-D, and ACX5448-M Power System | 52
AC Power Supply for ACX5400 Routers | 53
AC Power Specifications for ACX5400 Routers | 55
AC Power Cord Specifications for ACX5400 Routers | 55
DC Power Supply for ACX5400 Routers | 57
DC Power Specifications for ACX5400 Routers | 59
Site Planning, Preparation, and Specifications
2
Site Preparation Checklist for ACX5448, ACX5448-D, and ACX5448-M Routers | 63
ACX5448, ACX5448-D, and ACX5448-M Site Guidelines and Requirements | 64
General Site Guidelines | 65
Site Electrical Wiring Guidelines | 65
Chassis Physical Specifications for ACX5400 Routers | 66
ACX5400 Router Environmental Requirements and Specifications | 67
ACX5400 Grounding Cable and Lug Specifications | 68
Clearance Requirements for Airflow and Hardware Maintenance for ACX5400 Routers | 70
Cabinet Requirements for ACX5400 Routers | 71
iv
Rack Requirements for ACX5400 Routers | 72
ACX5448, ACX5448-D, and ACX5448-M Network Cable and Transceiver Planning | 73
Determining Transceiver Support for ACX5400 | 74
Cable Specifications for QSFP+ and QSFP28 Transceivers | 74
Calculating Power Budget and Power Margin for Fiber-Optic Cables | 76
Calculating Power Budget for Fiber-Optic Cable | 76
Calculating Power Margin for Fiber-Optic Cable | 77
Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion | 78
Signal Loss in Multimode and Single-Mode Fiber-Optic Cable | 78
Attenuation and Dispersion in Fiber-Optic Cable | 79
ACX5448, ACX5448-D, and ACX5448-M Management and Console Port Specifications
and Pinouts | 80
Management Cable Specifications for ACX5400 Routers | 80
Management Port Connector Pinout Information for ACX Series Routers | 80
Console or Auxiliary Port Connector Pinout on ACX Series Routers | 81
USB Port Specifications for an ACX Series Router | 82
Initial Installation and Configuration
3
ACX5448, ACX5448-D, and ACX5448-M Installation Overview | 85
Unpacking and Mounting ACX5448, ACX5448-D, and ACX5448-M | 86
Unpack an ACX5400 Router | 86
Mount an ACX5400 Router in a Rack or Cabinet | 87
Before You Begin Rack Installation | 88
Install the ACX5400 Router in the Rack | 89
Connect ACX5448, ACX5448-D, and ACX5448-M to Power | 95
Connect Earth Ground to ACX5400 Routers | 95
Connect AC Power to an ACX5400 Router | 98
Connect DC Power to an ACX5400 Router | 102
Connect ACX5448, ACX5448-D, and ACX5448-M to External Devices | 106
Connect an ACX5400 Router to a Management Console | 106
Connect an ACX5400 Router to a Network for Out-of-Band Management | 107
v
Connect an ACX5400 Router to External Clocking and Timing Devices | 108
Perform Initial Software Configuration for the ACX5448, ACX5448-D, and ACX5448-M
Routers | 109
Maintaining Components
4
Maintaining ACX5448, ACX5448-D, and ACX5448-M Components | 115
Replace an ACX5400 Fan Module | 115
Remove a Fan Module from an ACX5400 Router | 115
Install a Fan Module in an ACX5400 Router | 117
Replace an ACX5400 AC Power Supply Module | 118
Remove an AC Power Supply Module from an ACX5400 Router | 118
Install an AC Power Supply Module in an ACX5400 Router | 120
Replace an ACX5400 DC Power Supply Module | 122
Remove an ACX5400 DC Power Supply Module | 123
Install an ACX5400 DC Power Supply Module | 124
Replace an SFP+ Transceiver | 127
Remove an SFP+ Transceiver | 127
Install an SFP+ Transceiver | 128
Replace a QSFP28 Transceiver | 129
Remove a QSFP28 Transceiver | 130
Install a QSFP28 Transceiver | 131
Replacing a CFP2 Transceiver | 132
Removing a CFP2 Transceiver | 133
Installing a CFP2 Transceiver | 134
Maintaining Fiber-Optic Cables | 136
Removing the ACX5448, ACX5448-D, or ACX5448-M Router | 136
Power Off an ACX5400 Router | 137
Remove an ACX5400 Router from a Rack or Cabinet | 138
Troubleshooting Hardware
5
Troubleshooting the ACX5448, ACX5448-D, and ACX5448-M Routers | 143
Alarm Types and Severity Classes on ACX Series Routers | 143
Alarm Types | 143
Alarm Severity Classes | 144
vi
Contacting Customer Support and Returning the Chassis or Components
6
Contacting Customer Support and Returning the Chassis or Components | 147
Returning a Hardware Component to Juniper Networks, Inc. | 147
How to Locate the Serial Number on an ACX5400 Router or Component | 148
List the Chassis and Component Details Using the CLI | 149
Locate the Chassis Serial Number ID Label on an ACX5400 Router | 151
Locate the Serial Number ID Labels on ACX5400 Power Supply Modules | 152
Locate the Serial Number ID Label on an ACX5400 Fan Module | 153
Contacting Customer Support to Obtain Return Material Authorization | 154
Guidelines for Packing Hardware Components for Shipment | 155
Safety and Compliance Information
7
General Safety Guidelines and Warnings | 159
Definitions of Safety Warning Levels | 160
Qualified Personnel Warning | 163
Warning Statement for Norway and Sweden | 164
Fire Safety Requirements | 164
Fire Suppression | 164
Fire Suppression Equipment | 164
Installation Instructions Warning | 166
Restricted Access Warning | 167
Ramp Warning | 169
Rack-Mounting and Cabinet-Mounting Warnings | 170
Grounded Equipment Warning | 176
Radiation from Open Port Apertures Warning | 177
Laser and LED Safety Guidelines and Warnings | 178
General Laser Safety Guidelines | 178
Class 1 Laser Product Warning | 179
Class 1 LED Product Warning | 180
vii
Laser Beam Warning | 181
Maintenance and Operational Safety Guidelines and Warnings | 181
Battery Handling Warning | 183
Jewelry Removal Warning | 184
Lightning Activity Warning | 186
Operating Temperature Warning | 187
Product Disposal Warning | 189
General Electrical Safety Guidelines and Warnings | 190
Prevention of Electrostatic Discharge Damage | 191
Site Electrical Wiring Guidelines | 192
AC Power Electrical Safety Guidelines | 193
AC Power Disconnection Warning | 195
DC Power Disconnection Warning | 196
DC Power Grounding Requirements and Warning | 198
DC Power Wiring Sequence Warning | 200
DC Power Wiring Terminations Warning | 203
Multiple Power Supplies Disconnection Warning | 206
TN Power Warning | 207
Action to Take After an Electrical Accident | 207
Agency Approvals for ACX5448, ACX5448-D, and ACX5448-M Routers | 208
Compliance Statements for NEBS | 209
Compliance Statements for EMC Requirements | 209
Canada | 209
European Community | 210
Israel | 210
Japan | 210
United States | 210
Compliance Statements for Environmental Requirements | 211
viii
About the Documentation
IN THIS SECTION
Documentation and Release Notes | ix
Using the Examples in This Manual | ix
Documentation Conventions | xi
Documentation Feedback | xiv
Requesting Technical Support | xiv
Use this guide to install hardware and perform initial software configuration, routine maintenance, and
troubleshooting for the ACX5448 Router.
After completing the installation and basic configuration procedures covered in this guide, refer to the
Junos OS documentation for information about further software configuration.
Documentation and Release Notes
To obtain the most current version of all Juniper Networks
®
technical documentation, see the product
documentation page on the Juniper Networks website at https://www.juniper.net/documentation/.
If the information in the latest release notes differs from the information in the documentation, follow the
product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject matter experts.
These books go beyond the technical documentation to explore the nuances of network architecture,
deployment, and administration. The current list can be viewed at https://www.juniper.net/books.
Using the Examples in This Manual
If you want to use the examples in this manual, you can use the load merge or the load merge relative
command. These commands cause the software to merge the incoming configuration into the current
candidate configuration. The example does not become active until you commit the candidate configuration.
ix
If the example configuration contains the top level of the hierarchy (or multiple hierarchies), the example
is a full example. In this case, use the load merge command.
If the example configuration does not start at the top level of the hierarchy, the example is a snippet. In
this case, use the load merge relative command. These procedures are described in the following sections.
Merging a Full Example
To merge a full example, follow these steps:
1. From the HTML or PDF version of the manual, copy a configuration example into a text file, save the
file with a name, and copy the file to a directory on your routing platform.
For example, copy the following configuration to a file and name the file ex-script.conf. Copy the
ex-script.conf file to the /var/tmp directory on your routing platform.
system {
scripts {
commit {
file ex-script.xsl;
}
}
}
interfaces {
fxp0 {
disable;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
}
}
2. Merge the contents of the file into your routing platform configuration by issuing the load merge
configuration mode command:
[edit]
user@host# load merge /var/tmp/ex-script.conf
load complete
x
Merging a Snippet
To merge a snippet, follow these steps:
1. From the HTML or PDF version of the manual, copy a configuration snippet into a text file, save the
file with a name, and copy the file to a directory on your routing platform.
For example, copy the following snippet to a file and name the file ex-script-snippet.conf. Copy the
ex-script-snippet.conf file to the /var/tmp directory on your routing platform.
commit {
file ex-script-snippet.xsl; }
2. Move to the hierarchy level that is relevant for this snippet by issuing the following configuration mode
command:
[edit]
user@host# edit system scripts
[edit system scripts]
3. Merge the contents of the file into your routing platform configuration by issuing the load merge
relative configuration mode command:
[edit system scripts]
user@host# load merge relative /var/tmp/ex-script-snippet.conf
load complete
For more information about the load command, see CLI Explorer.
Documentation Conventions
Table 1 on page xii defines notice icons used in this guide.
xi
Table 1: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware
damage.
Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Indicates helpful information.Tip
Alerts you to a recommended use or implementation.Best practice
Table 2 on page xii defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
ExamplesDescriptionConvention
To enter configuration mode, type
the configure command:
user@host> configure
Represents text that you type.Bold text like this
user@host> show chassis alarms
No alarms currently active
Represents output that appears on
the terminal screen.
Fixed-width text like this
A policy term is a named structure
that defines match conditions and
actions.
Junos OS CLI User Guide
RFC 1997, BGP Communities
Attribute
Introduces or emphasizes important
new terms.
Identifies guide names.
Identifies RFC and Internet draft
titles.
Italic text like this
xii
Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
Configure the machine’s domain
name:
[edit]
root@# set system domain-name
domain-name
Represents variables (options for
which you substitute a value) in
commands or configuration
statements.
Italic text like this
To configure a stub area, include
the stub statement at the [edit
protocols ospf area area-id]
hierarchy level.
The console port is labeled
CONSOLE.
Represents names of configuration
statements, commands, files, and
directories; configuration hierarchy
levels; or labels on routing platform
components.
Text like this
stub <default-metric metric>;Encloses optional keywords or
variables.
< > (angle brackets)
broadcast | multicast
(string1 | string2 | string3)
Indicates a choice between the
mutually exclusive keywords or
variables on either side of the symbol.
The set of choices is often enclosed
in parentheses for clarity.
| (pipe symbol)
rsvp { # Required for dynamic MPLS
only
Indicates a comment specified on the
same line as the configuration
statement to which it applies.
# (pound sign)
community name members [
community-ids ]
Encloses a variable for which you can
substitute one or more values.
[ ] (square brackets)
[edit]
routing-options {
static {
route default {
nexthop address;
retain;
}
}
}
Identifies a level in the configuration
hierarchy.
Indention and braces ( { } )
Identifies a leaf statement at a
configuration hierarchy level.
; (semicolon)
GUI Conventions
xiii
Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
In the Logical Interfaces box, select
All Interfaces.
To cancel the configuration, click
Cancel.
Represents graphical user interface
(GUI) items you click or select.
Bold text like this
In the configuration editor hierarchy,
select Protocols>Ospf.
Separates levels in a hierarchy of
menu selections.
> (bold right angle bracket)
Documentation Feedback
We encourage you to provide feedback so that we can improve our documentation. You can use either
of the following methods:
Online feedback system—Click TechLibrary Feedback, on the lower right of any page on the Juniper
Networks TechLibrary site, and do one of the following:
Click the thumbs-up icon if the information on the page was helpful to you.
Click the thumbs-down icon if the information on the page was not helpful to you or if you have
suggestions for improvement, and use the pop-up form to provide feedback.
E-mail—Send your comments to [email protected]. Include the document or topic name,
URL or page number, and software version (if applicable).
Requesting Technical Support
Technical product support is available through the Juniper Networks Technical Assistance Center (JTAC).
If you are a customer with an active Juniper Care or Partner Support Services support contract, or are
xiv
covered under warranty, and need post-sales technical support, you can access our tools and resources
online or open a case with JTAC.
JTAC policies—For a complete understanding of our JTAC procedures and policies, review the JTAC User
Guide located at https://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
Product warranties—For product warranty information, visit https://www.juniper.net/support/warranty/.
JTAC hours of operation—The JTAC centers have resources available 24 hours a day, 7 days a week,
365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called
the Customer Support Center (CSC) that provides you with the following features:
Find CSC offerings: https://www.juniper.net/customers/support/
Search for known bugs: https://prsearch.juniper.net/
Find product documentation: https://www.juniper.net/documentation/
Find solutions and answer questions using our Knowledge Base: https://kb.juniper.net/
Download the latest versions of software and review release notes:
https://www.juniper.net/customers/csc/software/
Search technical bulletins for relevant hardware and software notifications:
https://kb.juniper.net/InfoCenter/
Join and participate in the Juniper Networks Community Forum:
https://www.juniper.net/company/communities/
Create a service request online: https://myjuniper.juniper.net
To verify service entitlement by product serial number, use our Serial Number Entitlement (SNE) Tool:
https://entitlementsearch.juniper.net/entitlementsearch/
Creating a Service Request with JTAC
You can create a service request with JTAC on the Web or by telephone.
Visit https://myjuniper.juniper.net.
Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
For international or direct-dial options in countries without toll-free numbers, see
https://support.juniper.net/support/requesting-support/.
xv
1
CHAPTER
Overview
ACX5448, ACX5448-D, and ACX5448-M System Overview | 19
ACX5448, ACX5448-D, and ACX5448-M Chassis | 30
Cooling System and Airflow in ACX5448, ACX5448-D, and ACX5448-M Routers | 47
ACX5448, ACX5448-D, and ACX5448-M Power System | 52
ACX5448, ACX5448-D, and ACX5448-M System
Overview
IN THIS SECTION
ACX5400 Universal Metro Router Description | 19
ACX5400 Router Models | 25
Field-Replaceable Units in ACX5400 Routers | 26
Hardware Redundancy of ACX5400 Router Components and Functionality | 27
ACX5400 Routers Hardware and CLI Terminology Mapping | 27
ACX5400 System Software Overview | 29
ACX5400 Universal Metro Router Description
IN THIS SECTION
Benefits of ACX5400 Routers | 21
ACX5448, ACX5448-D, and ACX5448-M System Overview | 21
The Juniper Networks ACX5400 Universal Metro Routers are top-of-rack routers with deep packet buffer
solutions for metro network or aggregation environments. The ACX5400 router portfolio consists of
high-performance, fixed-configuration, 1 U routers that add higher port densities, additional scalability,
and improved latency to the ACX Series. The routers have a high-throughput Packet Forwarding Engine,
which provides full duplex throughput of 800 Gbps.
The ACX5400 line of routers are available in three variants:
ACX5448
ACX5448-D
ACX5448-M
19
Figure 1 on page 20 and Figure 2 on page 20 show the front and rear, respectively, of a typical ACX5448
router.
Figure 1: ACX5448 Router—Front
Figure 2: AC-Powered ACX5448 Router—Rear
Figure 3 on page 20 and Figure 4 on page 20 show the front and rear, respectively, of a typical ACX5448-D
router.
Figure 3: ACX5448-D Router—Front
Figure 4: AC-Powered ACX5448-D Router—Rear
Figure 5 on page 20 and Figure 6 on page 21 show the front and rear, respectively, of a typical ACX5448-M
router.
Figure 5: ACX5448-M Router—Front
20
Figure 6: AC-Powered ACX5448-M Router—Rear
Benefits of ACX5400 Routers
Optimized space—The ACX5400 router has a 1 U form factor and is ideal for Ethernet service aggregation.
Its innovative design helps service providers build high-density, high-performance 100-Gigabit Ethernet
infrastructures where rack space and cooling are limited.
High performance
The 52 ports on the ACX5448 router support 10-Gbps and 100-Gbps speeds providing a total
throughput of up to 800 Gbps. The router provides full metro Ethernet and IP/MPLS VPN services in
a space-optimized platform.
The ACX5448-D router supports 10-Gigabit, 100-Gigabit, and 100G/200G dense wavelength-division
multiplexing (DWDM) ports with a system throughput of up to 800 Gbps. The innovative design of
the ACX5448-D helps service providers develop converged packet optical solutions.
Simplified network architecture The ACX5400 line of routers simplify access and aggregation
architectures by eliminating unnecessary layers and network overlays.
Advanced security capabilities The ACX5448-M router supports advanced security capabilities such
as Media Access Control Security (MACsec) on the 10-Gigabit or 1-Gigabit Ethernet ports to protect
against potential network vulnerabilities.
ACX5448, ACX5448-D, and ACX5448-M System Overview
The ACX5400 routers have a high-throughput Packet Forwarding Engine, and the performance of the
control plane running on ACX5400 routers is enhanced by the 1.9-Ghz six-core Intel CPU with 32-GB of
memory and two 100-GB enterprise-grade solid-state drives (SSDs) for storage.
We ship the ACX5400 routers with redundant fans and redundant power supply modules (PSMs). You
can order the routers with front-to-back airflow (airflow out or AFO) or back-to-front airflow (airflow in
or AFI), and with AC or DC PSMs.
Figure 7 on page 22 shows the important components on the front of the ACX5448 router.
21
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206

Juniper ACX5448-D User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages