wtw Multi 3620 IDS Operating instructions

OPERATING MANUAL

ba77169e01 04/2016

Multi 3620 IDS

DIGITAL METER FOR IDS SENSORS

3630 IDS

2 ba77169e01 04/2016

Multi 3620 IDS

Copyright

Reproduction in whole - or even in part - is prohibited without the

express written permission of WTW GmbH, Weilheim.

Printed in Germany.

For the most recent version of the present operating man-

ual, visit www.wtw.com

.

Multi 3620 IDS Contents

3

Contents

ba77169d01 04/2016

1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 MeterMulti 3620 IDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.2 Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.2.1 IDS sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.2.2 Wireless operation of IDS sensors. . . . . . . . . . . . . . . . . . . 8

1.2.3 IDS adapter for analog sensors . . . . . . . . . . . . . . . . . . . . . 9

1.2.4 Automatic sensor recognition. . . . . . . . . . . . . . . . . . . . . . . 9

2 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.1 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.1.1 Safety information in the operating manual . . . . . . . . . . . 10

2.1.2 Safety signs on the meter . . . . . . . . . . . . . . . . . . . . . . . . 10

2.1.3 Further documents providing safety information . . . . . . . 10

2.2 Safe operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.2.1 Authorized use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.2.2 Requirements for safe operation . . . . . . . . . . . . . . . . . . . 11

2.2.3 Unauthorized use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.1 Scope of delivery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.2 Power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.3 Initial commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.3.1 Inserting the rechargeable batteries. . . . . . . . . . . . . . . . . 12

3.3.2 Connecting the power pack / charging the batteries . . . . 13

3.3.3 Switching on the meter. . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.3.4 Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . 15

4 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.1 General operating principles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.1.1 Keypad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.1.2 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.3 Status information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1.4 Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4.1.5 Channel display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4.1.6 Sensor info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.1.7 Display of several sensors in the measuring mode . . . 20

4.2 Switching on the meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.3 Switching off the meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.4 Login with user name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.5 Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.5.1 Operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.5.2 Measured value display . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.5.3 Menus and dialogs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Contents Multi 3620 IDS

4

ba77169d01 04/2016

4.5.4 Navigation example 1: Setting the language . . . . . . . . . . 25

4.5.5 Example 2 on navigation: Setting the date and time . . . . 27

5 pH value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.1 Measuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.1.1 Measuring the pH value . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.1.2 Measuring the temperature. . . . . . . . . . . . . . . . . . . . . . . . 30

5.2 pH calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.2.1 Why calibrate? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.2.2 When do you have to calibrate? . . . . . . . . . . . . . . . . . . . . 31

5.2.3 Automatic calibration (AutoCal) . . . . . . . . . . . . . . . . . . . . 31

5.2.4 Manual calibration (ConCal) . . . . . . . . . . . . . . . . . . . . . . . 34

5.2.5 Calibration points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5.2.6 Calibration data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5.3 Continuous measurement control (CMC function) . . . . . . . . . . 40

5.4 QSC function (sensor quality control) . . . . . . . . . . . . . . . . . . . . 41

6 ORP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

6.1 Measuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

6.1.1 Measuring the ORP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

6.1.2 Measuring the temperature. . . . . . . . . . . . . . . . . . . . . . . . 46

6.2 ORP calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

7 Dissolved oxygen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

7.1 Measuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

7.1.1 Measuring D.O.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

7.1.2 Measuring the temperature. . . . . . . . . . . . . . . . . . . . . . . . 50

7.2 FDO

®

check procedure (check of the FDO

®

925). . . . . . . . . . . . . 50

7.2.1 Why should you check the sensor? . . . . . . . . . . . . . . . . . 50

7.2.2 When should you check the sensor? . . . . . . . . . . . . . . . . 50

7.2.3 Carrying out the FDO

®

check procedure . . . . . . . . . . . . . 51

7.2.4 Evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

7.3 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

7.3.1 Why calibrate? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

7.3.2 When to calibrate? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

7.3.3 Calibration procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

7.3.4 Calibration in water vapor-saturated air . . . . . . . . . . . . . . 53

7.3.5 Calibration data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

8 Conductivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

8.1 Measuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

8.1.1 Measuring the conductivity . . . . . . . . . . . . . . . . . . . . . . . . 56

8.1.2 Measuring the temperature. . . . . . . . . . . . . . . . . . . . . . . . 58

8.2 Temperature compensation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

8.3 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

8.3.1 Why calibrate? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

8.3.2 When to calibrate? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Multi 3620 IDS Contents

5

ba77169d01 04/2016

8.3.3 Determining the cell constant (calibration in control

standard) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

8.3.4 Calibration data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

9 Turbidity measurement (VisoTurb

®

900-P) . . . . . . . . . . . . . . . 63

9.1 Measuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

9.1.1 Measuring the turbidity. . . . . . . . . . . . . . . . . . . . . . . . . . . 63

9.2 Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

9.2.1 Why calibrate? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

9.2.2 When to calibrate? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

9.2.3 Calibration standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

9.2.4 Carry out calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

9.2.5 Calibration data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

10 Depth of immersion (multi parameter probe MPP 9x0 IDS). . 70

10.1 General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

10.2 Measuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

10.2.1 Measuring the depth of immersion. . . . . . . . . . . . . . . . . . 71

10.2.2 Measuring the temperature . . . . . . . . . . . . . . . . . . . . . . . 73

10.3 Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

10.4 DPT measurement settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

10.4.1 Settings for depth measurements . . . . . . . . . . . . . . . . . . 74

10.5 What to do if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

11 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

11.1 pH measurement settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

11.1.1 Settings for pH measurements. . . . . . . . . . . . . . . . . . . . . 76

11.1.2 Buffer sets for calibration . . . . . . . . . . . . . . . . . . . . . . . . . 77

11.1.3 Calibration interval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

11.2 ORP measurement settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

11.2.1 Settings for ORP measurements . . . . . . . . . . . . . . . . . . . 80

11.3 D.O. measurement settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

11.3.1 Settings for D.O. sensors. . . . . . . . . . . . . . . . . . . . . . . . . 80

11.4 Cond measurement settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

11.4.1 Settings for IDS conductivity sensors. . . . . . . . . . . . . . . . 82

11.5 Turb measurement settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

11.5.1 Settings for turbidity sensors . . . . . . . . . . . . . . . . . . . . . . 84

11.6 Sensor-independent settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

11.6.1 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

11.6.2 Data storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

11.6.3 Automatic Stability control . . . . . . . . . . . . . . . . . . . . . . . . 87

11.6.4 Automatic switch-off function . . . . . . . . . . . . . . . . . . . . . . 87

11.6.5 Display illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

11.7 Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

11.7.1 Resetting the measurement settings. . . . . . . . . . . . . . . . 88

11.7.2 Resetting the system settings . . . . . . . . . . . . . . . . . . . . . 90

Multi 3620 IDS

6

ba77169d01 04/2016

12 Data memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

12.1 Manual storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

12.2 Automatic data storage at intervals . . . . . . . . . . . . . . . . . . . . . 91

12.3 Measurement data memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

12.3.1 Editing the measurement data memory . . . . . . . . . . . . . . 94

12.3.2 Erasing the measurement data memory . . . . . . . . . . . . . 95

12.3.3 Measurement dataset . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

13 Transmitting data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

13.1 Outputting current measurement data . . . . . . . . . . . . . . . . . . . . . 97

13.2 Transmitting data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

13.3 Connecting the PC (USB-B interface (USB Device)) . . . . . . . . 97

13.4 Connecting a USB memory device/USB printer

(USB-A interface (USB Host)). . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

13.5 Options for data transmission to the USB-B (PC) interface and the

USB-A (USB printer) interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

13.6 Data transmission to the USB-A interface (USB memory device) 99

13.7 MultiLab Importer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

14 Maintenance, cleaning, disposal . . . . . . . . . . . . . . . . . . . . . . 102

14.1 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

14.1.1 General maintenance activities . . . . . . . . . . . . . . . . . . . 102

14.1.2 Replacing the rechargeable batteries . . . . . . . . . . . . . . 102

14.2 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

14.3 Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

14.4 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

15 What to do if... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

15.1 General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

15.2 pH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

15.3 Dissolved oxygen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

15.4 Conductivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

15.5 Turbidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

16 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

16.1 General data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

16.2 Measuring ranges, resolution, accuracy . . . . . . . . . . . . . . . . . . . 111

17 Appendix: Firmware update . . . . . . . . . . . . . . . . . . . . . . . . . . 112

17.1 Firmware update for the meter Multi 3620 IDS . . . . . . . . . . . . . . 112

17.2 Firmware-Update for IDS Sensors . . . . . . . . . . . . . . . . . . . . . . . 113

18 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

19 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Overview Multi 3620 IDS

7 ba77169e01 04/2016

1 Overview

1.1 MeterMulti 3620 IDS

The compact, digital precision meter Multi 3620 IDS enables you to carry out

pH measurements, ORP measurements, conductivity measurements, dis-

solved oxygen (D.O.) measurements and turbidity measurements quickly and

reliably.

The Multi 3620 IDS provides the maximum degree of operating comfort, reli-

ability and measuring certainty for all applications.

The Multi 3620 IDS supports you in your work with the following functions:

 proven calibration procedures

 automatic stability control (AR)

 automatic sensor recognition

 CMC (continuous measurement control)

 QSC (sensor quality control).

1 Keypad

2 Display

3 Connectors

3630 IDS

1

2

3

Multi 3620 IDS Overview

ba77169e01 04/2016 8

1.2 Sensors

1.2.1 IDS sensors

IDS sensors

 support the automatic sensor recognition

 show only the settings relevant to the specific sensor in the setting menu

 process signals in the sensor digitally so that precise and interference-free

measurements are enabled even with long cables

 facilitate to assign a sensor to a measured parameter with differently colored

couplings

 have quick-lock couplings with which to fix the sensors to the meter.

Sensor data from

IDS sensors

IDS sensors transmit the following sensor data to the meter:

 SENSOR ID

– Sensor name

– Sensor series number

 Calibration data

 Measurement settings

The calibration data are updated in the IDS sensor after each calibration pro-

cedure. A message is displayed while the data are being updated in the sensor.

1.2.2 Wireless operation of IDS sensors

With the aid of the adapters in the IDS WLM System, IDS sensors with plug

head connectors (variant P) can be wirelessly connected to your

Multi 3620 IDS.

Information on available IDS sensors is given on the Internet.

In the measured value display, you can display the sensor name

and series number of the selected sensor with the [Info] softkey.

You can then display further sensor data stored in the sensor with

the [More] softkey (see section 4.1.6 S

ENSOR INFO).

Further information on the wireless operation of IDS sensors:

 Web resources

 Operating manual of the IDS WLM System.

Overview Multi 3620 IDS

9 ba77169e01 04/2016

1.2.3 IDS adapter for analog sensors

With the aid of an IDS adapter, you can also operate analog sensors

on the Multi 3620 IDS. The combination of the IDS adapter and analog sensor

behaves like an IDS sensor.

1.2.4 Automatic sensor recognition

The automatic sensor recognition for IDS sensors allows

 to operate an IDS sensor with different meters without recalibrating

 to operate different IDS sensors at one meter without recalibration

 to assign measurement data to an IDS sensor

– Measurement datasets are always stored and output with the sensor

name and sensor series number.

 to assign calibration data to an IDS sensor

– Calibration data and calibration history are always stored and output with

the sensor name and sensor series number.

 to activate the correct cell constant for conductivity sensors automatically

 to hide menus automatically that do not concern this sensor

To be able to use the automatic sensor recognition, a meter that supports the

automatic sensor recognition (e.g. Multi 3620 IDS) and a digital IDS sensor are

required.

In digital IDS sensors, sensor data are stored that clearly identify the sensor.

The sensor data are automatically taken over by the meter.

Information on available IDS adapters is given on the Internet.

Detailed information on the IDS adapter is given in the operating

manual of the adapter.

Multi 3620 IDS Safety

ba77169e01 04/2016 10

2 Safety

2.1 Safety information

2.1.1 Safety information in the operating manual

This operating manual provides important information on the safe operation of

the meter. Read this operating manual thoroughly and make yourself familiar

with the meter before putting it into operation or working with it. The operating

manual must be kept in the vicinity of the meter so you can always find the infor-

mation you need.

Important safety instructions are highlighted in this operating manual. They are

indicated by the warning symbol (triangle) in the left column. The signal word

(e.g. "CAUTION") indicates the level of danger:

NOTE

indicates a possibly dangerous situation where goods might be damaged

if the actions mentioned are not taken.

2.1.2 Safety signs on the meter

Note all labels, information signs and safety symbols on the meter and in the

battery compartment. A warning symbol (triangle) without text refers to safety

information in this operating manual.

2.1.3 Further documents providing safety information

The following documents provide additional information, which you should

observe for your safety when working with the measuring system:

• Operating manuals of sensors and other accessories

• Safety datasheets of calibration or maintenance accessories (such as buffer

solutions, electrolyte solutions, etc.)

WARNING

indicates a possibly dangerous situation that can lead to seri-

ous (irreversible) injury or death if the safety instruction is not

followed.

CAUTION

indicates a possibly dangerous situation that can lead to

slight (reversible) injury if the safety instruction is not fol-

lowed.

Safety Multi 3620 IDS

11 ba77169e01 04/2016

2.2 Safe operation

2.2.1 Authorized use

The authorized use of the meter consists exclusively of the measurement of the

pH, ORP, conductivity and dissolved oxygen in a laboratory environment.

Only the operation and running of the meter according to the instructions and

technical specifications given in this operating manual is authorized (see sec-

tion 16 T

ECHNICAL DATA, page 110).

Any other use is considered unauthorized.

2.2.2 Requirements for safe operation

Note the following points for safe operation:

• The meter may only be operated according to the authorized use specified

above.

• The meter may only be supplied with power by the energy sources

mentioned in this operating manual.

• The meter may only be operated under the environmental conditions

mentioned in this operating manual.

• The meter may only be opened if this is explicitly described in this operating

manual (example: Inserting the batteries).

2.2.3 Unauthorized use

The meter must not be put into operation if:

• it is visibly damaged (e.g. after being transported)

• it was stored under adverse conditions for a lengthy period of time (storing

conditions, see section 16 T

ECHNICAL DATA, page 110).

Multi 3620 IDS Commissioning

ba77169e01 04/2016 12

3 Commissioning

3.1 Scope of delivery

 MeterMulti 3620 IDS

 4 NiMH rechargeable batteries 1.2 V Mignon type AA

 USB cable (A plug on mini B plug)

 Power pack

 Short instructions

 Detailed operating manual (4 languages)

 CD-ROM with

– USB drivers

– detailed operating manual

– Software MultiLab Importer

3.2 Power supply

The Multi 3620 IDS is supplied with power in the following ways:

 Battery operation with NiMh rechargeable batteries

 Mains operation with the supplied power pack.

The NiMh batteries are automatically charged while the power pack is con-

nected.

 USB operation via a connected USB-B cable.

The NiMh batteries are not charged

3.3 Initial commissioning

Perform the following activities:

 Insert the batteries and charge them

 Connect the power pack (mains operation / battery charging)

 Switch on the meter

 Set the date and time

3.3.1 Inserting the rechargeable batteries

Commissioning Multi 3620 IDS

13 ba77169e01 04/2016

3.3.2 Connecting the power pack / charging the batteries

1Screws

2 Battery compartment

1 Unscrew the two screws (1) on the underside of the meter.

2 Open the battery compartment (2) on the underside of the

meter.

CAUTION

Make sure that the poles of the rechargeable batteries are po-

sitioned correctly.

The

± signs on the batteries must correspond to the ± signs in

the battery compartment.

3 Place four rechargeable batteries (type Mignon AA) in the battery

compartment.

4 Close the battery compartment (2) and tighten the screws (1).

CAUTION

Use original power packs only (see section 16.1).

The line voltage at the operating site must lie within the input

voltage range of the original power pack (see section 16.1).

2

1

Multi 3620 IDS Commissioning

ba77169e01 04/2016 14

During mains operation, one of the following symbols is displayed:

3.3.3 Switching on the meter

CAUTION

The batteries in the battery compartment are automatically

charged when the power pack is connected.

Make sure that only NiMH rechargeable batteries are in the

battery compartment. The charging process is optimized for

NiMH batteries. Other battery types can cause damage during

the charging process.

Make sure that the ambient temperature is not more than 40 °C

(104 °F) when the power pack is connected.

1 Connect the plug of the power pack to the socket for the power pack

on the Multi 3620 IDS.

2 Connect the original power pack to an easily accessible power outlet.

:

Mains operation with charge function

Batteries are automatically charged in the background.

:

Mains operation

Charge the batteries completely prior to putting the meter into oper-

ation for the first time. The charging process takes approx. 10

hours. The symbol is displayed if the batteries are nearly dis-

charged.

1 Press the <On/Off>

key.

The meter performs a self-test.

The display shows the manufacturer's logo while the self-test is being

performed.

2 Connect the sensor.

The meter switches to the measuring mode (measured value display).

The meter has an energy saving feature to avoid unnecessary

power consumption during battery operation.

The energy saving feature switches off the meter during battery

operation if no key is pressed during the adjusted interval. (How to

set the switch-off interval, see section 11.6).

The switch-off interval of the energy saving feature is not active

when the meter is supplied with power via the power pack or the

USB-B cable.

Commissioning Multi 3620 IDS

15 ba77169e01 04/2016

3.3.4 Setting the date and time

3 See section 4.5.5

Multi 3620 IDS Operation

ba77169e01 04/2016 16

4Operation

4.1 General operating principles

4.1.1 Keypad

In this operating manual, keys are indicated by brackets <..> .

The key symbol (e.g. <ENTER>) generally indicates a short keystroke (under

2 sec) in this operating manual. A long keystroke (approx. 2 sec) is indicated

by the underscore behind the key symbol (e.g. <ENTER_>).

<F1>:

<F2>:

Softkeys providing situation dependent functions, e.g.:

<F1>/[Info]: View information on a sensor

<On/Off>:

<On/Off_>:

Switches the meter on or off

<M>: Selects the measured parameter

<CAL>:

<CAL_>:

Calls up the calibration procedure

Displays the calibration data

<AR> Freezes the measured value (HOLD function)

Switches the AutoRead measurement on or off

<STO>:

<STO_>:

Saves a measured value manually

Opens the menu for the automatic save function

<RCL>:

<RCL_>:

Displays the manually stored measured values

Displays the automatically stored measured values

<><>:

<><>:

Menu control, navigation

<ENTER>:

<ENTER_>:

Opens the menu for measurement settings / Confirms entries

Opens the menu for system settings

<PRT__>

Outputs stored data to the interface

Outputs displayed data to the interface at intervals

<[ESC]>: Cancels an action

Operation Multi 3620 IDS

17 ba77169e01 04/2016

4.1.2 Display

Example (pH):

4.1.3 Status information

1 Status information (meter)

2 Status information (sensor)

3 Measured value

4 Measured parameter

5 Continuous measurement control (CMC function)

6 Channel display: Plug position of the sensor

7 Sensor symbol (calibration evaluation, calibration interval)

8 Measured temperature (with unit)

9 Softkeys and date + time

AutoCal

e.g. TEC

Calibration with automatic buffer recognition, e.g. with the

buffer set: Technical buffers

ConCal Calibration with any buffers

Error An error occurred during calibration

AR Stability control (AutoRead) is active

HOLD Measured value is frozen (<AR> key)

Batteries are almost empty

Mains operation

Mains operation with charge function

Batteries are automatically charged in the background.

Data are automatically output to the USB-B interface at

intervals

Data are output to the USB-A interface (USB flash drive)

3

2

1

4

6

7

8

5

22.02.2016 08:00

Info

Multi 3620 IDS Operation

ba77169e01 04/2016 18

4.1.4 Connectors

4.1.5 Channel display

The Multi 3620 IDS administers the sensors connected and displays which

sensor is plugged to which connection.

Data are output to the USB-A interface (USB printer).

If there is a USB-B connection at the same time (e.g. to a

PC), the data are output to the USB-B interface only.

Power supply via the USB-B interface

Batteries are not being charged

1 IDS sensors: (pH, ORP, conductivity, D.O.)

2 Power pack

3 USB-A (host) interface

4 USB B (device) interface

5 Service interface

CAUTION

Only connect sensors to the meter that cannot return any volt-

ages or currents that are not allowed (> SELV and > current

circuit with current limiting).

WTW IDS sensors and IDS adapters meet these requirements.

5

1

2

3

4

Operation Multi 3620 IDS

19 ba77169e01 04/2016

4.1.6 Sensor info

You can display the current sensor data and sensor settings of a connected

sensor at any time. The sensor data are available in the measured value dis-

play with the [Info] softkey.

1 Channel display:

Display of the plug position for the relevant parameter

The red bar indicates for each connected sensor to which plug posi-

tion (channel) of the meter it is connected.

1 In the measured value display:

Display the sensor data (sensor name, series number) with [Info].

1

Info

30.09.2015 08:00Info

30.09.2015 08:00

More

SenTix 940

B092500013

Multi 3620 IDS Operation

ba77169e01 04/2016 20

4.1.7 Display of several sensors in the measuring mode

The measured values of the connected sensors can be displayed in the follow-

ing ways:

 Clear display of all connected sensors

 Detailed display of one sensor

(e.g. incl. CMC feature with pH sensors)

With the softkey you can very easily switch between the two display types. The

suitable softkey is displayed depending on the operating situation.

4.2 Switching on the meter

2 Display further sensor data (settings) with [More].

30.09.2015 08:00

Man. temperature:

25 °C

pH resolution 0.001

mV resolution 0.1

Buffer TEC

Calibration interval 7d

Unit for slope mV/pH

QSC:

Software version 1.0

SenTix 940

B092500013

30.09.2015 08:00

Info

30.09.2015 08:00

Info

1 Switch the meter on with <On/Off>.

The meter performs a self-test.

Page is loading ...

wtw Multi 3620 IDS Operating instructions

wtw Multi 3620 IDS Operating instructions

Related papers

Other documents