Ohlins FGKT1493/1494 Mounting Instruction

Type
Mounting Instruction

This manual is also suitable for

TTX Cartridge Kit for KTM SX/ SX-F models
FGKT 1493/1494
Application Specic Mounting Instructions
Note!1
Please note that this image is a general representation
of the product and may differ slightly from your product.
Note!1
Please note that during storage and transportation,
especially at high ambient temperature, some of the oil
and grease used for assembling may leak and stain the
packaging. This is in no way detrimental to the product,
wipe off the excessive oil/grease with a cloth.
Note!1
Before installing this product, check the contents of
the kit. If anything is missing, please contact an Öhlins
dealer.
Warning!
Before installing this product, read the Öhlins Owner’s
Manual. The shock absorber/front fork/steering damper
is an important part of your vehicle and will affect
the stability.
Kit Contents
Description Part No Pcs
TTX Cartridge Kit FGKT1493/94 1
TTX Cartr. sticker 00191-40 2
Sticker Öhlins 00192-01 2
Owner’s manual 07296-90 1
Circlip 15440-01 2
Base plug (w O-rings) 15430-01 2
Spacer 2 mm 15443-02 20
Hydraulic stop cup N/A -
Spring support washer N/A -
Note!1
No springs included in this kit. Use appropriate Öhlins
Front Fork springs, part no. 08765-XX. See the Spring
guide in this folder or contact Öhlins for advice.
2
MOUNTING INSTRUCTIONS
Warning!
It is advisable to have an Öhlins dealer install the shock
absorber/front fork/steering damper.
Warning!
If working on a raised vehicle, ensure it is securely
supported so that it will not tip.
Note!1
Before mounting this product clean the vehicle
thoroughly.
Note!1
When working on this product, always see the Vehicle
Service Manual for vehicle specic procedures and
important data.
1
To install, see the general mounting instruc-
tions in the Owner’s manual.
Tools needed Notes
OEM Fork cap tool, hexagon 50 mm
Socket for OEM Base plug 19 mm
Socket for Öhlins Base plug 20 mm
Hydraulic Stop Cup
Standard OEM Hydraulic stop cup for this
model.
3
MOUNTING INSTRUCTIONS
Compression damping adjuster
Rebound damping adjuster
Warning!
Before riding, always make sure that the basic settings
made by Öhlins are according to recommended Set-
up Data. Read about adjustments and setting up in
the Öhlins Owner’s Manual before you make any
adjustments. Contact an Öhlins dealer if you have any
questions about setting up.
ADJUSTMENTS
Öhlins Racing AB
Box 722
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
To nd the latest information
contact an Öhlins distributor.
Please contact Öhlins if you have
any questions regarding the
contents in this document.
SETUP DATA
SPRING GUIDE
Part no. MI_FGKT1493/1494_2
Issued 2013-12-19
Rebound damping 15 clicks
Compression damping 15 clicks
Spring preload* 4 mm
Fluid volume (each leg) 0,360 litre
Spring preload range -2 to 8 mm
Adjust by adding /removing washer 15443-02
Fluid volume range 0,300-0,400 litre
Öhlins Front Fork uid 01309-01
FGKT 1493
kg/pound*
125cc/150cc
2 stroke
250cc
2 stroke
250cc 350cc
60/132 43-45 44-46 44-46 44-46
65/143 44-46 45-47 45-47 45-47
70/154 44-46 45-47 45-47 45-47
75/165 45-47 46-48 46-48 46-48
80/176 45-47 46-48 46-48 46-48
85/187 46-48 47-49 47-49 47-49
90/198 46-48 47-49 47-49 47-49
95/209 47-49 48-50 48-50 48-50
100/220 47-49 48-50 48-50 48-50
105/231 48-50 48-50 48-50 48-50
110/242 48-50 49-51 49-51 49-51
115/253 48-50 49-51 49-51 49-51
120/264 49-51 51 51 51
125/275 50-51 51 51 51
FGKT 1494
kg/pound* 450cc
60/132 45-47
65/143 46-48
70/154 46-48
75/165 47-49
80/176 47-49
85/187 48-50
90/198 48-50
95/209 48-50
100/220 49-51
105/231 49-51
110/242 50-51
115/253 51
120/264 52
125/275 54
*Rider’s weight: Rider wearing proper riding gear. Make sure you know your total weight with riding gear.
Riding gear weighs between 5 and 15 kg.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Ohlins FGKT1493/1494 Mounting Instruction

Type
Mounting Instruction
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI