Ohlins FGKT1496 Mounting Instruction

Brand: Ohlins

Model: FGKT1496

Type: Mounting Instruction

Ohlins FGKT1496 is a high-performance front fork kit designed to enhance the handling and stability of your KTM SX-F motorcycle. With its advanced TTX cartridge system, the FGKT1496 provides precise damping control, allowing you to fine-tune your suspension setup to match your riding style and track conditions. The kit includes a range of adjustment options, including rebound and compression damping, as well as spring preload, so you can dial in the perfect settings for your weight, riding style, and terrain.

RXF Front Fork kit for KTM SX-F

FGKT 1496

Mounting Instructions

Note!1

Please note that the images in this folder are a general

representation of the product and may differ slightly

from your product.

Note!1

Please note that during storage and transportation,

especially at high ambient temperature, some of the oil

and grease used for assembling may leak and stain the

packaging. This is in no way detrimental to the product,

wipe off the excessive oil/grease with a cloth.

Note!1

Before installing this product, check the contents of

the kit. If anything is missing, please contact an Öhlins

dealer.

Warning!⚠

Before installing this product, read the Öhlins Owner’s

Manual. The shock absorber/front fork/steering damper

is an important part of your vehicle and will affect

the stability.

Kit Contents

Description Part No Pcs

Front Fork RXF 48 kit FGKT1496 1

TTX Cartridge sticker 00191-40 2

Sticker Öhlins 00192-01 2

Owner’s manual 07295-31 1

Triple clamp upper N/A -

Triple clamp lower N/A -

MOUNTING INSTRUCTIONS

Warning!⚠

It is advisable to have an Öhlins dealer install the shock

absorber/front fork/steering damper.

Warning!⚠

If working on a raised vehicle, ensure it is securely

supported so that it will not tip.

Note!1

Before mounting this product clean the vehicle

thoroughly.

Note!1

When working on this product, always see the Vehicle

Service Manual for vehicle specic procedures and

important data.

To install, see the vehicle service manual

and the mounting instructions in the Owner’s

manual.

Tightening torque

Upper triple clamp M8 20 Nm

Lower triple clamp M8 15 Nm

Brake caliper M8 25 Nm

Fork protectors M6 7 Nm

Front wheel axle 50 Nm

Front axle clamp M8 15 Nm

MOUNTING INSTRUCTIONS

ADJUSTMENTS

Warning!⚠

Before riding, always make sure that the basic settings

made by Öhlins are according to recommended Set-

up Data. Read about adjustments and setting up in

the Öhlins Owner’s Manual before you make any

adjustments. Contact an Öhlins dealer if you have any

questions about setting up.

Öhlins Racing AB

Box 722

S-194 27 Upplands Väsby, Sweden

Phone +46 8 590 025 00

fax +46 8 590 025 80

reserved. Any reprinting or

unauthorized use without the written

permission of Öhlins Racing AB

is prohibited.

Öhlins products are subject to

continuous improvement and

development, therefore, although

these instructions include the most

up-to-date information available at

the time of printing, minor updates

may occur.

To nd the latest information

contact an Öhlins distributor.

Please contact Öhlins if you have

any questions regarding the

contents in this document.

SETUP DATA

SPRING GUIDE

Part no. MI_FGKT1496_0

Issued 2013-09-20

Front fork length 944 mm

Front fork stroke 307 mm

Rebound damping 14 clicks

Compression damping 14 clicks

Fluid volume (each leg) 0,370 litre

Volume range (each leg) 0,300-

0,400 litre

Öhlins Front Fork uid 01309-01

Spring

Installed spring 08765-49

Spring rate 4,9 N/mm

Spring free length 467±3 mm

Optional springs 08765-43,-45,-47,-51

Spring preload 4 mm

Spring preload range 2-10 mm

Adjust by adding /removing washer 15443-02

*Rider’s weight: Rider wearing proper riding gear.

Make sure you know your total weight with riding gear.

Riding gear weighs between 5 and 15 kg.

kg/pound*

125cc/150cc

2 stroke

250cc

2 stroke

250cc 350cc 450cc

60/132 43-45 44-46 44-46 44-46 45-47

65/143 44-46 45-47 45-47 45-47 46-48

70/154 44-46 45-47 45-47 45-47 46-48

75/165 45-47 46-48 46-48 46-48 47-49

80/176 45-47 46-48 46-48 46-48 47-49

85/187 46-48 47-49 47-49 47-49 48-50

90/198 46-48 47-49 47-49 47-49 48-50

95/209 47-49 48-50 48-50 48-50 48-50

100/220 47-49 48-50 48-50 48-50 49-51

105/231 48-50 48-50 48-50 48-50 49-51

110/242 48-50 49-51 49-51 49-51 50-51

115/253 48-50 49-51 49-51 49-51 51

120/264 49-51 51 51 51 52

125/275 50-51 51 51 51 54

Ohlins FGKT1496 Mounting Instruction

Ohlins FGKT1496 Mounting Instruction

Ohlins FGKT1496 Mounting Instruction

Related papers

Other documents