LAMONA SNK5647 Installation guide

LAMONA
Brand
LAMONA
Model
SNK5647
Type
Installation guide

This manual is also suitable for

Undermount Sink Installation
Silicone
1
Fit sink and
centralise.
Screws x24
Bracket x8
2
Secure sink with 8 clips and screws.
Recommended clip positions
Note: Worktop should be treated in accordance with the manufacturers instructions
Underside of
Note: Ensure both surfaces
are clean and free from dust
and grease before applying
silicone.
Use a silicone recommended
for use on sanitary ware.
Note: Leave for 24hrs
before use to allow the
silicone to cure.
Wipe away excess
silicone.
3
1
worktop shown
Inset Sink Installation
The worktop may require notching on the underside for the overflow.
10mm
10mm
22mm Max.
Top surface of Worktop
40mm
2
Fit sink and
centralise.
Note: Worktop should be treated in accordance with the manufacturers instructions
Note: Leave for 24hrs
before use to allow the
silicone to cure.
Wipe away excess
silicone.
Silicone
Note: Ensure both surfaces
are clean and free from dust
and grease before applying
silicone.
Use a silicone recommended
for use on sanitary ware.
Top of
worktop
shown
3
  • Page 1 1

LAMONA SNK5647 Installation guide

LAMONA
Brand
LAMONA
Model
SNK5647
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents