Undermount Sink Installation
Silicone
1
Fit sink and
centralise.
Screws x24
Bracket x8
2
Secure sink with 8 clips and screws.
Recommended clip positions
Note: Worktop should be treated in accordance with the manufacturers instructions
Underside of
Note: Ensure both surfaces
are clean and free from dust
and grease before applying
silicone.
Use a silicone recommended
for use on sanitary ware.
Note: Leave for 24hrs
before use to allow the
silicone to cure.
Wipe away excess
silicone.
3
1
worktop shown
Inset Sink Installation
The worktop may require notching on the underside for the overflow.
10mm
10mm
22mm Max.
Top surface of Worktop
40mm
2
Fit sink and
centralise.
Note: Worktop should be treated in accordance with the manufacturers instructions
Note: Leave for 24hrs
before use to allow the
silicone to cure.
Wipe away excess
silicone.
Silicone
Note: Ensure both surfaces
are clean and free from dust
and grease before applying
silicone.
Use a silicone recommended
for use on sanitary ware.
Top of
worktop
shown
3
-
1
LAMONA Contemporary Single Bowl Inset/Undermount Ceramic White Kitchen Sink Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Unbranded WOK5697 Installation guide
-
Coolzone CZ55572 Operating instructions
-
-
Rangemaster PAR3115 Specification
-
Howdens WHT3160 Installation guide
-
-
Rangemaster SN9951 Specification
-
-
Carf-Models Extra 260 2.6m Owner's manual
-
Belling CH77TC Owner's manual