2. Merra
  3. HCF-4038-00-BNHD-1
HCF-4038-00-BNHD-1

Merra HCF-4038-00-BNHD-1 Operating instructions

  • Hello! I've reviewed the instructions for the Lamp HCF-4038-00. This document provides detailed steps for safely assembling and installing your lamp. It covers important safety measures, wiring preparation, mounting the bracket, and filling the LED tube with crystals. I'm ready to answer your questions about this process.
  • Should I take any safety measures before installation?
    What is the first step in assembling the lamp?
    What should I do after placing the canopy?
V20220412
Contact Us
Thank you for choosing our products! If you have any questions or
comments, contact us at [email protected] and we'll resolve your
issue ASAP!
For a .pdf copy of the latest version of these instructions, use the
appropriate app on your smartphone to scan the QR code to the right.
HCF-4038-00 Rev. 13 Apr. 2022
ASSEMBLY
1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your
junction box (not included).
2. Removethecanopynuts(F)fromthecanopybolts(B)andtakethemountingbracket(A)o
the canopy (E).
3. Connect the mounting bracket to your junction box using the mounting bolts (C).
4. Make electrical connections using the wire nuts (D).
5. Being careful that no wiring is left exposed, place the canopy against the mounting bracket
and replace the canopy nuts.
6. Remove the cap (I). Fill the LED light tube (G) with the crystals (H) and replace the cap.
7. Turn on your lamp and enjoy!
WARNING!
Read these instructions carefully prior to installation.
• Check for electric, gas, and plumbing lines before drilling or consult a professional.
• ALWAYS cut ALL relevant power before installing a lighting fixture and do not
restore power to the line until the lamp has been FULLY installed.
INSTRUCTIONS
Junction Box
Mounting Bracket (A)
Mounting Bolt (C)
Wire Nut (D)
Canopy (E)
Canopy Nut (F)
LED Light Tube (G)
Crystal (H)
Cap (I)
Junction Box
Mounting Bracket (A)
LED Light Tube (G)
Mounting Bolt (C)
Canopy (E) Canopy Nut (F)
Canopy Bolt (B)
Wire Nut (D)
Crystal (H)
Cap (I)
/