Tuya R9 User guide

Type
User guide
Select device type : Video Surveilance - Smart Doorbell , then make connection with the device
according to the steps
Wi-Fi networks,5GHz
Home Button
To reset the device , long press this button for 5 seconds
To light the display , short press this button for 1 second
BatterySlot
Support 1*5000 battery
Camera
Blinking blue light : Configuration status
Red light on : Charging the battery
Blue light on: Connect to phone successfully;
Open App Store (for iOS) or Google Play Store (for Android outside China ) or Yingyongbao
Store (For Android inside China) on your device, Search for “TuyaSmart” or scan QR code
as following to download the right App for your device.
“Please use the APP to set up the network”,
home button for 5 seconds.
Indoor unitOutdoor unit
Viscose foam
Outdoor unit
Fixing screws
Plug cable
Steel sheet hanging board
Display
Indoor host
Peephole
IR LED
Speaker
Camera
Light Sensor
Microphone
Doorbell Button
PIR
4.3 inch
Home Button
TF card
Charging plug
Switch
TF card
Charging plug
Switch
书6折:468X140mm,200g铜做300张
200uA;
When you hear the prompt "connecting the network”
When you hear the prompt "connecting the network",tap "I heard a Prompt"
and waiting for device connection till success
Can support 2~3 months of usage (depend on
how many events trigger per day )
Date Record
Photograph
Replay Replay
Photograph
1*5000 mA battery normally can supports 3-6 months usage.
1*5000 mA battery
5000mAh
  • Page 1 1
  • Page 2 2

Tuya R9 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI