Baldwin Boxall MAXREL Operating instructions

  • Hello! I've reviewed the Operating Manual for the Baldwin Boxall MAXIM Relay Option. This document describes how to install and connect the relay, which provides an isolated output from amplifier and operates on 24V DC with a max of 2A. I'm here to help with any questions you may have about it.
  • What voltage is required to energize the relay coil?
    Where can I get the 24V DC power supply?
    What is the maximum current rating for the relay?
The option board gives the user an extra relay that is isolated from
all amplifier outputs.
To mount the option use the 2 screws provided.
To energise the relay coil, 24V DC (available from the amplifier)
should be applied to the pins shown above.
IMAXREL
Issue 1 21/10/98
MAXIM RELAY OPTION
Connection Details
Baldwin Boxall Communications Ltd.
Wealden Industrial Estate, Farningham Road
Crowborough, East Sussex, TN6 2JR
Telephone: 01892 664422 Fax: 01892 663146
Email: mail@baldwinboxall.co.uk
+24V
2A MAX
0V
/