Bang & Olufsen DVB-S User manual

Brand: Bang & Olufsen

Model: DVB-S

Category: DVD players

Type: User manual

This manual is also suitable for

BeoVision 7

BeoVision 7 

This Getting Started contains information about the daily use of your Bang& 

Olufsen product and connected equipment. We expect your retailer to deliver, 

install and set up your product. 

Your television offers more features and functions than described in this Getting 

Started. Among other things; Timer functions and auto standby, editing and 

naming channels. These and other features are described in more detail in the 

product’s Guide. 

The Guides are found on www.bang-olufsen.com/guides. 

All DVB functions are described in separate Guides. The Guides are also kept up to 

date if new software introduces new or modied features and functions in your 

television. 

On www.bang-olufsen.com you can also nd further information and relevant 

FAQs about your product. 

Your Bang& Olufsen retailer is your rst stop for all your service queries. 

To nd your nearest retailer, visit our website…

  www.bang-olufsen.com 

Dear Customer

3510566  1006 

Technical specications, features and the use 

thereof are subject to change without notice. 

Cautions

–  Ensure that the television is positioned, set up 

and connected in accordance with the 

instructions in this Getting Started. To prevent 

injury, use Bang & Olufsen approved stands and 

wall brackets only! 

–  Place your television on a rm, stable surface. 

–  Do not place any items on top of your television. 

–  Do not subject the television to rain, high 

humidity or sources of heat. 

–  The television is developed for indoor use in dry, 

domestic environments only. Use within a 

temperature range of 10–40°C (50–105°F), and 

at an altitude of no more than 1,500m (5,000ft).

–  Do not place the television in direct sunlight or 

direct articial light, such as a spotlight, as this 

may reduce the sensitivity of the remote control 

receiver. Also if the screen is overheated, black 

spots may appear in the picture. These spots 

disappear again, once the television cools down 

to normal temperature. 

–  Leave enough space around the television for 

adequate ventilation. 

–  Connect all cables before connecting or 

reconnecting any of the products in your system 

to the mains. 

–  No naked ame sources, such as lighted candles 

should be placed on the apparatus. 

–  Do not attempt to open the television. Leave 

such operations to qualied service personnel. 

– 

Do not strike the glass with hard or pointed items.

– 

The television can only be switched off completely

by disconnecting it from the wall socket. 

–  The disconnect device shall remain readily 

operable. 

–  The supplied mains cord and plug are specially 

designed for the television. If you change the 

plug or in any way damage the mains cord, it 

can affect the TV performance. 

WARNING: To reduce the risk of fire or 

electric shock, do not expose this 

appliance to rain or moisture. Do not 

expose this equip ment to dripping or 

splashing and ensure that no objects 

filled with liquids, such as vases, are 

placed on the equipment. 

To completely disconnect this equipment 

from the AC Mains, disconnect the mains 

plug from the wall socket. The disconnect 

device shall remain readily operable. 

The lightning flash with arrowhead 

symbol within an equilateral triangle, 

is intended to alert the user to the 

presence of un insulated “dangerous 

voltage” within the product’s en-

closure that may be of sufficient 

magnitude to constitute a risk of 

electric shock to persons. 

The exclamation point within an equi-

lateral triangle is intended to alert the 

user to the presence of important 

operating and main tenance (servicing) 

instructions in the literature 

accompanying the product. 

Daily use

Contents

    Daily use 

6   How to use your remote control 

8   Introduction 

10  Watch television 

12   Look up teletext 

14  Watch television via the DVB module 

16  Use the Blu-ray player 

18  Change sound type and picture format 

19  Use the Adaptive Sound Technology 

    Installation

22  Set up your television 

23  Cleaning 

24  Connection panels – BeoVision7-55 

26  Connection panels – BeoVision7-40 

28  First-time setup of your television 

STOP

PLAY

BACK

Living Room

TV V.MEM RADIO

DTV N.MUSIC N.RADIO

PC DVD CD

How to use your remote control

Important

– for more information: www.bang-olufsen.com

About buttons

Coloured buttons

Actual zone

Soft buttons on Beo5

Light grey buttons indicate that you have to press a text in the display. Dark grey buttons indicate that you have to 

press a hard button. 

Press the wheel next to the colour to activate a coloured button. 

Indicates the actual zone on Beo5 as it was named during the setup process. 

Depending on the activated source, different soft buttons appear on the screen. Touch the screen to activate the 

function. 

Start playback of a disc or recording

Step through channels or recordings

Hold for continuous step 

Navigation button left, right, up and down – move in menus by pressing the

button in the direction you need

Standby

Rewind or wind, search backwards or forwards

Pause and stop playback or recording

Soft button, touch screen to select*

Switch on a source or select a function 

Centre button is used for selecting and accepting

Turn to adjust volume

To mute, turn quickly counter-clockwise 

Bring up SCENE buttons, such as Zones or Speaker

Press again to return 

Select colour specic functions*

Press volume wheel next to the colour 

Bring up digits to select channel

Press again to return 

Back up through Beo5 displays

Move backwards through menus. Long press to exit menus completely

Beo5 operation

Your television can be operated with the Beo5 remote control. 

PLAY

STOP

BACK

TV LIGHT RADIO

DTV DVD CD

V.MEM TEX T A.MEM

7 8 9

4 5 6

LIST

1 2 3

STOP PLAY

BACK

Daily use

Select colour specic functions

Adjust volume

To mute, press the middle of the button 

The Beo4 display shows you the activated source or function

Navigation button left, right, up and down

, , and – move in menus by

pressing the button in the direction you need

Centre button is used for selecting and accepting

Rewind or wind, search backwards or forwards

Start playback of a disc or recording

Switch on the DVB module and watch digital television

Standby

Bring up the main menu of the active source

Pause and stop playback or recording 

Switch on the TV*

Select channels and enter information in on-screen menus

Step through channels

Hold for continuous step

Move backwards through menus and the Beo4 list. Long press to exit menus

completely

Beo4 operation

You can also operate your television with a Beo4. When Beo4 operation is 

different from Beo5 operation, it is described separately. 

Switch on teletext

Display extra “buttons” for functions or sources in the Beo4 display. Use

or to

step in the list

Some buttons can be recongured during the setup process. See the Guide for further information. 

NOTE! For general information about remote control operation, see the guide enclosed with your  

remote control. 

Beo4 buttons

Switch on the optional Blu-ray player

PLAY

DTV

0 – 9

STOP

BACK

TEXT

LIST

DVD

Navigate in menus and select settings using your remote control. Pressing Menu 

brings up the menu for the selected source. 

Information about the selected source is shown in 

the display window to the right. On-screen menus 

allow you to adjust settings. 

Display and menus

Introduction

Show menu Select TV’s zone  Switch on TV 

Important

Remote control

On the rst pages in this Getting Started, you will nd an overview of the buttons on Beo5 and Beo4. 

For general information about remote control operation, see the guide enclosed with your remote 

control. This Getting Started and the Guide describe operation with the REMOTE CONTROL menu set to 

NAVIGATION BUTTON and the remote control set to MODE1. Do not change MODE during rst-time 

setup, as this will interrupt the sequence. 

Switch on optional Blu-ray player 

… TV Menu

TV SETU P

TU NING

SL EEP TIMER

PL AY T IMER

OP TIONS

STAN D PO SITIONS

se lect

DVD

Menu name

Menu options

Information eld

Example of on-screen menu 

Daily use

When a menu is on the screen, you can move 

between menu options, reveal settings or enter 

data. 

Navigate in menus

Select option/

setting 

Enter data  Bring up sub-

menu/store 

setting 

Select option  Move 

backwards 

through menus 

Press and hold to 

exit menus 

In the OPTIONS menu, you can bring up the REMOTE CONTROL menu. In this menu you must set up 

your television to be operated with or without a navigation button. Remember to set your Beo4 remote 

control to the correct mode. See the Beo4 guide or contact your Bang& Olufsen retailer for further 

information. 

REMOTE CONTROL menu

0 – 9 BACK

BACK

Watch television

Choose a TV channel by its number or switch to another 

channel. Adjust the sound volume and turn the TV. 

Activate the TV source to use these functions

Switch on the TV

Select a TV channel

Bring up a channel list

Adjust the volume

Turn the TV

Switch off the TV

Useful hints

If your television is equipped with a motorised stand, you can turn it 

by means of the remote control 

*TV positions Position1 is the far left position and Position9 is the far right. Position 5 is the centre position. 

Beo5 operation

TV CHANNEL LIST

CN N 1

… 2

DI SCOVER 3

CW NBC 4

BB CWORLD 5

… 6

… 7

… 8

SU PER CH 9

… 10

CR IME TV 11

CI NEMA 12

… 13

MOVIE NW 14

… 15

… 16

… 17

… 18

mo re se lect

Channel name

Channel number

Indicates that more channels are

available

Daily use

Press 

Select 

channel 

Previous channel 

Hold for 

channel list 

Select page or channel and accept 

Adjust 

volume up 

or down 

Press in the 

middle to 

mute sound 

Press in the middle to 

bring sound back 

Press to nd 

STAND 

Bring up 

STAND 

Turn TV  Select 

position*

Press 

Select  Activate 

numbers 

Select previous channel 

Hold for 

channel list 

Select 

channel 

Adjust volume. To mute, turn quickly 

counter-clockwise 

Turn either way to bring back the sound 

Press  Turn TV  Select position*

Press 

NOTE! 

To use the stand function, you have to 

calibrate the stand rst, see p.29. To preset 

positions for the TV to turn to, see p.29. 

Beo4 operation

Select channel 

Select page  Activate numbers  Accept 

Press 

0–9

Stand Turn

Position

1…9

LIST

0–9

1–9

0 Previous

0–9

Turn

Look up teletext

Operate teletext through the menu bar at the top of the 

teletext page or the arrow buttons on your remote control. 

Activate teletext to use these functions

Start teletext

Move to page

Stop subpages from turning

Enlarge teletext page

MEMO pages

Exit teletext

Useful hints

POINT

MEMO pages

Dual screen

REVEAL

To return to the previous page, press BACK. The point feature is only available if your remote control 

has a navigation button that is enabled. 

For quick access, store a teletext page as a MEMO page. See the Guide for further information. 

When teletext is activated, press Text to swap between dual screen and full screen mode. 

To reveal hidden text on a teletext page, move to REVEAL and press the centre button. 

Access the start page of teletext. 

Access teletext pages you wish to see. 

MEMO is only available, when memo pages are stored. 

Beo5 operation

Point from one page to another

Navigate and point in the current or previous teletext page and bring 

up another. 

PAGE MEMO1 POINT HALT LARGE SETUP

P100 BBC S100 Wed 13 Oct 12:39:34

Current page

Enlarge

teletext pages

Stop subpage

turning

The arrow indicates that

more options are available

Make settings on SETUP

and reveal hidden text on

REVEAL

Daily use

Press 

Select 

page 

Move to PAGE and step 

Stop turning  Select subpage  Restart 

turning 

Move to 

LARGE 

Switch between upper and lower half

Press repeatedly to change screen mode 

Select page Move to PAGE and step 

Stop turning  Select subpage 

Move to LARGE  Press to switch between upper and lower half of page 

and normal viewing 

Switch between MEMO 

pages 

Press 

Press to switch between 

MEMO pages

Teletext subtitles

Timer programming

If you would like available subtitles to appear automatically for a particular 

channel, store the teletext subtitles page as MEMO page 9. 

To be able to programme a Timer, press Record or Menu when teletext is

activated. 

Restart 

turning 

Step up or 

down in 

pages 

Move to MEMO and switch between stored MEMO 

pages 

Move to MEMO and 

switch between pages 

Step up or 

down in 

pages 

NOTE! If your TV is linked via a MasterLink cable 

to another TV, stored MEMO pages are not shared 

among these TVs. MEMO pages must be stored 

manually on each linked TV. 

Beo4 operation

Go to index pages (100, 

200, 300…) 

Press Move to HALT 

Move to 

POINT 

Step into current page  Move between page 

references 

Select page 

Step into page Move to 

POINT 

Move between 

page references 

and select page 

Text TEXT

0–9

STOP 0–9

BACK

STOP

BACK

0–9

Watch television via the DVB module

Useful hints

DVB guide For more extensive and updated information, look up the DVB guide on www.bang-olufsen.com/guides. 

When your television is equipped with the DVB module, 

you can receive digital terrestrial, cable and satellite 

programmes depending on your module options. 

Switch on the TV and the DVB module

Select a DTV channel

Bring up and use the menu overlay

Step between groups

Bring up a channel or station list

Switch off the TV

Activate the DTV source to use these functions

Beo5 operation

RA D IO

PR O GR A MME GU I DE

ME N U

IN F OR M AT I ON

CH A NN E L G ROU P S

SU B TI T LES LA N GUAGE

AU DI O LA NGUAGE

SE T UP

CH A NN E L L IST

CA UN I TS

DVB function

Beo4 button

Daily use

Select  Select channel 

Press 

Activate the desired function 

Step between groups 

Hold for 

channel list

Select page  Select channel Accept 

Press 

Select  Activate numbers and select channel 

Select function 

Step between groups 

Hold for channel list, 

select page or channel 

Press 

Beo4 operation

NOTE! Press Menu twice to bring up the TV 

SETUP menu. 

0–9

DTV

MENU 0–9

DTV

0–9

Groups+ Groups-

…

Use the Blu-ray player

Useful hints

‘ANGLE’ and ‘BONUS

VIEW’ menus

‘SETUP’ menu

*Slow playback

ANGLE and BONUS VIEW menus are displayed if PLAYBACK STATUS is set to 

EXTENDED in the SETUP menu and the information is available. 

Use the main menu to make your own settings for playback. 

Slow playback backwards is not possible. 

If your TV is equipped with the optional Blu-ray player, you 

can watch both Blu-ray discs and DVDs. With Blu-ray discs 

the menu uses blue colours and with DVDs the menu uses 

red colours. 

Activate the source of the Blu-ray player to use these

functions

Beo5 operation

Switch on the Blu-ray player

Select a function

Pause or stop playback

Slow playback

Change chapters or tracks

Switch off the Blu-ray player

Pause or stop playback of a disc. 

Not all Blu-ray discs support the resume function. 

Bring up different menus, e.g. INFO menu to move to specic title/

chapter or point in time. Change audio/subtitle language or angle. 

Step in chapters/tracks on a disc. 

Play a disc

Playback in slowmotion.*

NOTE! If you have a Beo4 without navigation 

button, you must press the yellow button rst to 

activate the Blu-ray player’s functions, e.g. resume 

playback.

IN FO 1

DI SC ME NU 2

PO PUP/T ITLE 3

AUDI O 4

SU BTITL ES 5

RE PEAT 6

BO NUS VIEW 7

DV D SET UP 8

Press the load bar below the screen and 

place the disc in the loader with the label 

facing upwards. Hold the load bar to 

begin playback automatically. 

Important! Do not use disc adaptors.

Daily use

Beo4 operation

TV menu

Handling discs

On Beo4, press MENU twice to bring up the TV’s main menu, when DVD is 

selected as source. 

If a loaded disc is not recognised, it is ejected and ‘LOAD’ is shown in the 

display window. Check for disc faults such as ngerprints or scratches. The disc 

may also have an incompatible format. 

NOTE! If you are asked to press a coloured button, 

press the specic button twice, if you have a Beo4 

without navigation button. 

Press Press 

Select function Bring up menu 

overlay

Select 

function

Step in chapters/tracks  Cue during playback Resume playback

Start playback

Resume playback

Press 

Once to pause, press again to stop. 

Third to return to beginning of disc

Resume playback

Pause 

playback

Slow playback  Step in frames

Step or cue  Resume 

playback

Start playback

Pause 

playback

Resume 

playback

Once to pause, press again to stop. 

Third to return to beginning of disc

Slow playback or step in 

frames

Resume 

playback

Press 

Press and bring up 

SHIFT

STOP

PLAY

DVD

PLAY

PLAYSTOP

DVD

STOP

… MENU 1–8

PLAY

LIST

*Sound and picture

*Optimise

Move picture up or down

*Variation

On Beo4 bring up SOUND for sound types and FORMAT for picture formats via the LIST menu. In 

order to display SOUND and FORMAT on Beo4, you must rst add it to the Beo4 list of functions. 

The picture format is optimised, if you press Optimise on Beo5. On Beo4, press the centre button. 

The picture can only be moved up or down in Standard and Zoom. 

In Standard, you can select variations of the format, if you press Variation on Beo5. On Beo4, 

press 

 or  . 

Change sound type and picture format

While you watch TV through the television tuner, you can switch between available 

sound types and adjust the picture format. 

Change sound type or language

Switch between available sound types and 

languages. 

Useful hints

Select picture format

The TV automatically adapts the picture to ll out 

as much of the screen as possible when you select 

a source, but you can select a format yourself. 

The picture is 

adjusted vertically 

For a genuine 

16:9 widescreen 

picture 

For panoramic 

view or 4:3 

Wide Zoom Standard*



FORMAT 1

FORMAT 2

FORMAT 3

Bring up sound type*

  Press repeatedly to switch 

between available sound 

types 

Select Picture 

display*

Bring up Scene 

display on Beo5 

Select format*

Move picture up or down*

Sound Sound

1–3

Daily use

Use the Adaptive Sound Technology

Select listening preset

When you watch television or listen to music, you 

can select your own listening preset to optimise 

the sound for your listening position. You can also 

rotate the preset’s sound so that the sound is 

experienced as coming from directly in front of 

you. Adaptive Sound Technology must be enabled 

and set up. See the Guide for further information. 

Press

Select preset

Press

Rotate sound 

Remote control

Automatic selection of listening presets

To enjoy the advantages of this setup, several speakers and a Beo5 remote control are necessary. If you 

have only a few speakers or a Beo4 remote control, this setup is not recommended and you should 

choose the setup without Adaptive Sound Technology described in the Guide. 

The sound automatically switches to the TV preset when you switch on the TV. You can set an AUDIO 

PRESET in the SOUND ADJUSTMENT menu to make sound switch to a specic customised listening 

preset automatically when you select an audio source. 

To optimise the sound experience for your listening position, you can select a

customised listening preset and even rotate the sound to match the direction you

are facing.

and/or

Preset

…

Rotate Rotate

Page is loading ...

Bang & Olufsen DVB-S User manual

Brand: Bang & Olufsen

Model: DVB-S

Category: DVD players

Type: User manual

This manual is also suitable for

BeoVision 7

Download PDF

report

Bang & Olufsen DVB-S User manual

This manual is also suitable for

Bang & Olufsen DVB-S User manual

Related papers

Other documents