AF Lighting 8405-6H Installation guide

AF Lighting
Brand
AF Lighting
Model
8405-6H
Type
Installation guide
Fixture Assembly Instructions
NOTE:ALWAYS TURN POWER OFF TO ELECTRICAL PANEL BEFORE IN STALLING LIGHTING FIXTURES!
IMPORTANT:YOU SHOULE USE A QUALIFIED ELECTRICIAN TO INSTALL THIS FIXTURE.
WARNING!-
TO REDUCE THE RISK OF
FIRE,ELECTRIC SHOCK,OR PERSONAL INJURY:
-Turn off/unplug lamp and allow to cool before
replacing bulb.
-Do not touch bulb when fixture is turned on.
-Do not lock directly at linghted bulb.
-Keep materials that burn easily away from lighted
bulb.
CAUTION:
This fixture is partially assembled in the factory
by qualified craftsmen.Some assembly is required
before use.please follow the assembly instructions
carefully.
Assembly:(refer tl this illustration)
1). Carefully unpack your new fixture and lay out all the parts on
a clear area. Take care not to lose any small parts necessary
for installation
2). Screw center column onto coupling of the bottom body
tighten . Also installation the chain loop to the top of center
column.
3). Pass fixture wires from fixture through stems and screw
stems to top of fixture,and then secure stems together with
stem threads.
4). Screw the top stem to threaded pipe on swivel on the
canopy.
5). Assemble mounting screws into threaded holes in mounting
strap.
6). Attach mounting strap to outlet box and screw in place .
7). Make wires and ground wire connections
A.Use wire connector to connect white fixture wire to white
supply wire from outlet box.
B.Use wire connector to connect black fixture wire to black
supply wire from outlet box.
C.Use wire connector to connect fixture ground wire to outlet
box ground wire.
8). Pass fixture to ceiling ,carefully passing mounting screws
through holes in canopy.then secrouse with mounting net.
9). Place shade onto the socket as diagram .
10).Install bulb as required into the socket.
Use only the bulb type and wattage indicated on
wattage label located or near socker.
WARNING:
Never cxceed maximum wattage indicated as
it may cause fire.
CLEANING:
Use only soft cloth to dust and clean fixture,Never
use chemicals or abrasive cleaners as it may
damae finish.
MADE IN CHINA
SOCKET
ASSEMBLY
NUT
HEXNUT
GROUND WIRE
WIRE CONNECTOR
OUTLET BOX
CANOPY
OUTLET BOX
WHITE WIRE
MOUNTING STRAP FIXTURE BLACK WIRE
FIXTURE WHITE WIRE
BLACK WIRE
OUTLET BOX
CHAIN
CENTER TAPER
BODY
CRYSTAL
FINIAL
CRYSTAL FINIAL
8405-6H
STEM
牙管
CASTING LOOP
LOOP
LOOP
HEXNUT
WASHER
CRYSTAL BALL
DECORATIVE CAP
DECORATIVE CAP
  • Page 1 1

AF Lighting 8405-6H Installation guide

AF Lighting
Brand
AF Lighting
Model
8405-6H
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents