Trend TP20003ASL User manual

Brand: Trend

Model: TP20003ASL

Type: User manual

Trend TP20003ASL is a versatile lighting fixture that offers adjustable hanging height and easy installation. Connect multiple stems to achieve your desired height and effortlessly attach the canopy for a secure fit. Its straightforward wiring process, with clear instructions for connecting to power sources, ensures a smooth setup. Replaceable crystals add a touch of elegance and provide spares for future maintenance.

TP20003ASL

INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a later date.

CAUTION

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts are

missing by referencing the illustrations on the installation instructions.

1. OUTLET BOX

2. GROUND WIRE

3. BLACK WIRE

4. WHITE WIRE

5. WIRE CONNECTOR

6. GROUND SCREW

7. MOUNTING PLATE

8. MOUNTING SCREW

9. CANOPY

10. BALL NUT

11. STEM

12. STEM

13. STEM

14. STEM

15. STEM

16. FIXTURE BODY

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit

conductor. Min 90ºC supply conductors.

Turn off the main power at the circuit breaker before installing the fixture, in order to prevent

possible shock.

ASSEMBLY AND INSTALLATION

1. Determine the desired hanging height by attaching stems (11, 12, 13, 14, 15) to the

fixture body (16).

2. Feed fixture wires through stems (11, 12, 13, 14, 15). Connect stems

(11, 12, 13, 14, 15) to the fixture body (16) and turn clockwise until tight.

3. Connect canopy (9) to the stem (11) and turn clockwise until tight.

4. Pull out the outlet wire and ground wire from the outlet box (1). Make wire connections.

--Ribbed wire (w/o marking) from light to White wire (4) from power source.

--Smooth wire (w/o marking) from light to Black wire (3) from power source.

--Loop the ground wire (2) to mounting plate (7) with a ground screw (6).

5. Attach the mounting plate (7) to the outlet box (1) using mounting screws (8).

6. Tuck wire connections into the outlet box. Place the canopy (9) over the mounting plate

(7) and secure it with the ball nut (10).

7. Install bulb: (bulb not included)

(Do not exceed the maximum capacity recommended on the socket).

INSTALLATION IS NOW COMPLETED

Extra crystals are provided for replacement

Trend TP20003ASL User manual

Trend TP20003ASL User manual

Trend TP20003ASL User manual

Related papers

Other documents