CARLO GAVAZZI ESAVTD20A User manual

ESAV

Air Velocity & Temperature

Transmitter

Instruction Manual

Instruction Manual 
 
PAGE：2 OF 27 
Ver:01 
 
 
 
Summary ............................................................................................................................................................... 4 
Security considerations ................................................................................................................................... 5 
Housing & Dimension ..................................................................................................................................... 7 
General Hardware Feature ............................................................................................................................. 9 
Signal Connection ...........................................................................................................................................10 
Software ..............................................................................................................................................................11 
Installing and Using Software ESAV Soft ................................................................................................12 
1 Execute “ESAV Soft” ............................................................................................................................13 
2 Connect to PC via RS-485 ......................................................................................................................14 
3 Scan RS-485 connection ........................................................................................................................17 
4 Setting RS-485 communication format ...........................................................................................22 
5 Display Tab ..................................................................................................................................................24 
Protocol ...............................................................................................................................................................25 
Cautions ..............................................................................................................................................................26 
Inspection and Maintenance ....................................................................................................................27 
 
   
 
 
   
 
 

Instruction Manual

PAGE：3 OF 27

Ver:01

Instruction Manual

PAGE：4 OF 27

Ver:01

1. Summary

1.1 Features

1. Air Velocity up to 20 m/s

2. Temperature up to 50°C

3. Remote monitor by RS-485 (Modbus RTU)

4. Optional display

5. 2 x analog output 4-20mA or 0-10V

6. Customized monitoring system via software ESAV Soft

7. Graph plotting and logging function via software ESAV Soft

8. ESAV Soft can be download from the Carlo Gavazzi website www.gavazziautomation.com

1.2 Applicable Fields

 Monitoring for HVAC ducting

 Environmental control and clean room

 Laminar flow control

Instruction Manual

PAGE：5 OF 27

Ver:01

2. Security considerations

2.1. Manual Guide

Before using this product, user must read the details of this instruction manual to ensure using this

product with the correct steps. This instruction manual is for reference while using/ setting this product

and is required to be conserved properly.

Solemn Statement:

1. This product is not to be used in explosion-proof area.

2. Do not use this product in dangerous situation whereby human health & life may be threatened &

affected.

2.2. Illustration, Warning & Attention

Carlo Gavazzi will not be held responsible for any accidents and dangerous occurrences resulted from the

usage of this product.

Illustration

This mark is to give advice & warning for the potential dangers which result from obvious

wrong/ improper operation steps. (The left mark means “Watch out for electric shock”)

In order to avoid the dangerous situation, this mark means some special operation/

action is forbidden to implement. (The left mark means “Forbidden to Disassemble”)

In order to avoid the dangerous situation, this mark means specific action/ operation is

required to implement. (The left mark means “General Instruction”)

Instruction Manual

PAGE：6 OF 27

Ver:01

Warning

Please implement the wiring operation under power-off status; otherwise it will cause

electric shock, or become the root cause of machinery breakdown.

This product must be operated under rated power supplying value and be operated under

the ruled normal operation conditions which described in the instruction manual; otherwise

it may cause disasters such as fire accident or be the root cause of machinery breakdown.

Please install this product under normal ambient pressure. Otherwise it may cause safety

problems.

Attention

In order to be in accordance with all applicable safety standards, the installation & wiring

must be performed by qualified installer & professional instruments.

Please ensure the outlook/ packaging box do not have any damage which result from

improper transportation or malfunction which results from lost attachments.

In order to prevent the product from damages, this product must be used in the proper

environment specified in this instruction manual.

All wiring must comply with the rule of indoor wiring and standard electrical installation

rules.

In order to prevent the interferences from frequency converter etc. and to avoid error signal

resulted in this product, please use isolated conducting wire.

In order to prevent this product from short circuit, please install this product according to

the wiring diagram on chapter 5.

In order to prevent affecting this product’s accuracy from external interferences, please do

not use two-way wireless devices within 3 meters.

Do not disassemble this product, otherwise it may cause malfunction.

During product breakdown, please take safety precaution.

Please recycle the partial or whole parts while discarding this product.

While discarding this product, the user must comply with the standard rules for industrial

domestic wastes in different country/ location.

Instruction Manual

PAGE：7 OF 27

Ver:01

3. Housing & Dimension

3.1 Housing & Dimension

ESAVTR / ESAVTD

Instruction Manual

PAGE：8 OF 27

Ver:01

ESAVTR ESAVTD

Instruction Manual

PAGE：9 OF 27

Ver:01

4. General Hardware Specifications

Please refer to the datasheet for detail specifications

ESAV

 Air velocity 0.2m/s to 20m/s

 Temperature 0 to 50°C

 Power supply 12-30VAC/8-35VDC

 Accuracy air velocity +/-3% FS; temperature +/-0.3°C

 Working temperature 0 to 50°C

 Storage temperature -20 to 60°C

 2 X output 4-20mA/0-10V

 Optional RS485 output

 Optional LCD display with green backlight

 Remote or duct mounting

 Housing PC fire proof class (PC110)

 Electrical connection screw terminals & cable gland

 Protection degree IP54

 Polarity, short circuit, over voltage protection

 CE marking Yes

Instruction Manual

PAGE：10 OF 27

Ver:01

5. Signal Connection

The product comes with the connector included.

1. Analog Output Connection Diagram

2. RS-485 Serial Port Connection Diagram

Instruction Manual

PAGE：11 OF 27

Ver:01

6. Software

6.1 Minimum System Requirements

Processor: Intel Pentium 2.4 GHz or faster

OS: Windows XP, Windows 7, Windows 10

Memory: 512 MB of RAM

Hard Disk: 1 GB free space (for logging)

Display: XGA (1024x768)

Serial Port: 2-Wire RS-485

For Windows 10 (computer needs to have ‘’Microsoft Dot Net Framework 3.5 SP1’’ and ‘’Microsoft Chart

Controls for Dot Net Framework 3.5 SP1’’ which normally comes preinstalled with the Windows 10.

But if not, please download from the official Microsoft Windows website)

https://www.microsoft.com/en-sg/download/details.aspx?id=22

https://www.microsoft.com/en-sg/download/details.aspx?id=14422

6.2 RS-485 Serial Communication

This product uses RS-485 Serial Port Interface to connect with the computer, the hardware

communication interface is necessary (not included in this product)

1. If the PC equipped with COM Port. Use Converter (RS-232 to RS-485) to connect with this product.

2. In the PC is not equipped with COM Port. Use Converter (USB to RS-485) to connect with this product.

6.3 Setting Port No. & Transmission Rate

1. RS-485 serial communication interface running with Modbus Protocol

2. Usable Port No. range: 1 to 247.

3. On the same wiring, the Port No. must to be different.

4. The maximum devices which connected to RS-485 interface restricted to 32 devices.

5. Five selectable transmission rate (Baud Rate): 9600 / 19200 / 38400 / 57600 / 115200 bps.

Instruction Manual

PAGE：12 OF 27

Ver:01

7. Installing and Using the Software ESAV Soft

7.1 Execute ‘’ESAV Soft” ............................................................................................................................13

7.2 Connect to PC via RS-485 ..........................................................................................................................14

7.3 Scan RS-485 connection ............................................................................................................................17

7.4 Setting RS-485 communication format ................................................................................................22

7.5 Display Tab .......................................................................................................................................................24