Laser SPK-WFADAPTOR User manual

Brand: Laser

Model: SPK-WFADAPTOR

Category: Networking

Type: User manual

QUICK USER MANUAL SPK-WFADAPTOR

Safety Information and Notice

- Read all instructions carefully before use.

- Retain manuals for future reference.

- Use this product only in the manner described.

- Only use a water-dampened soft-cloth to clean the surface of this product.

- The following will damage this product: any liquid such as water or moisture, extreme heat;

cold; humidity, dusty or sandy environments.

- Only place this device on stable surfaces and ensure that any attached cables are secure and

will not cause the device to fall.

- If charging is required, it is recommended to thoroughly charge electronic devices for the first

time overnight. Subsequent charges can be as needed. During charging, or extended use, the

product may become warm.

- There are no user serviceable parts in this product.

- Un-authorized attempts to dismantle or repair this product will void product warranty

- Using this device near other electronic devices may cause interference.

QUICK USER MANUAL SPK-WFADAPTOR

Cable connections

MICRO USB: Socket for mains

power adapter. Connect the

power adapter to power on the

SPK-WFADAPTOR automatically.

Optical: Digital output. Using an

optical cable for digital-audio

connection.

LINE-Out: Audio output, 3.5mm

stereo socket

LAN: Ethernet LAN connection to

connect your speaker to a cable LAN

instead of Wi-Fi network

SET (RESET/ WPS Mode): Press

briefly to activate WPS mode;

press and hold for about 5 sec. to

restore the speaker to the factory

settings.

LED displays

NAME FUNCTION DESCRIPTION

WIFI

Flashes White

Searching for Wi-Fi network/ direct

mode active

Lights up solid White Wi-Fi connected

SET Flashes White rapidly

Speaker is processing “Factory default”

or “FW update”

Connecting the power supply

Plug the mains cable supplied into the DC IN socket on the SPK-WFADAPTOR.

Network configuration

The SPK-WFADAPTOR is connected to your network via WLAN. The Wi-Fi antenna on the

SPK-WFADAPTOR receives the signals from your network router.

Initial operation

You can use the SET (WPS) button to connect the SPK-WFADAPTOR to your network or set up the

network connection over a web interface on a smart device.

Connect SPK-WFADAPTOR with an audio device and ensure it is in range of your WLAN signal.

1 2 3 4

QUICK USER MANUAL SPK-WFADAPTOR

Option 1) Wi-Fi connection via WPS Mode

If your router has a WPS button, this is a simple and convenient way of connecting the speaker to the

network.

Press the WPS button on the router and press the SET (WPS) button briefly on the rear of the

SPK-WFADAPTOR to establish the connection.

Note: Please also refer to the instruction for the router.

The SPK-WFADAPTOR will now establish a connection with your network. The LED will flash rapidly

during this process. Once the connection has been made, the LED will turn solid White.

The SPK-WFADAPTOR can now play back audio signals from your network.

Note: The SPK-WFADAPTOR saves the connection data therefore they do not need to be re-entered the

next time it is switched on.

Option 2) Connecting to a network via the web interface

If it is not possible to connect to your network via WPS, you can use a web interface. You will need a

device which can access your wireless local network and an internet browser (e.g. a computer/

smartphone).

Note: Setup of your Wi-Fi Adaptor is very similar to the setup of your Wi-Fi Speaker. You can refer to

your Speaker Manual for further explanation of the below steps.

1) Power on your SPK-WFADAPTOR and search for it on the open Wi-Fi networks listed on the

computer/ Smartphone. (Note: For iPhone setup, please skip to step 3)

Note: XX-XX-XX following the model name in the SSID of the speaker stands for the last 6 characters of

the unique MAC address (hardware address) of the respective SPK-WFADAPTOR.

2) Open the web browser and enter 172.19.42.1 in the address bar of the browser then press ENTER

to confirm. The web interface of the WLAN will appear:

3) Enter a name for the SPK-WFADAPTOR by which you will be able to identify later e.g. “lounge” or

“kitchen”.

4) Search in the list of available networks in the “network name” drop-down menu and select the

network to which you want to connect the SPK-WFADAPTOR.

5) If the network router does not assign an IP address, switch the DHCP function off here and then

enter the IP address manually in the bottom boxes.

6) Then enter the network key, if required, and click on “CONNECT”.

The SPK-WFADAPTOR will now establish a connection with your Wi-Fi network. The White LED will

flash rapidly during this process. Once the connection has been made, the White LED will turn solid

and will stop flashing.

The SPK-WFADAPTOR can now play back audio signals from the network. The connection data will be

saved and therefore does not need to be re-entered next time.

QUICK USER MANUAL SPK-WFADAPTOR

Music playback

You can play music from the network over your SPK-WFADAPTOR (and speaker) and you can also play

music from your SPK-WFADAPTOR when connected via direct (cable) mode.

Installing the App on an Android / Apple smartphone/ tablet PC

In order to be able to use the music playback control function on the SPK-WFADAPTOR, you first need

to install the AllPlay Jukebox App for your Tablet PC/ Smartphone. This is available from the Play Store

(Android) or App Store (Apple).

Playback via network

Connect the SPK-WFADAPTOR to an available Wi-Fi network, following the previous instruction.

Connect your smart device to the same network and start up the relevant DLNA App.

Once the App has started, select a Media Server (DLNA server) from which you want to play music and

then select the SPK-WFADAPTOR as the medium (DLNA player) on which the music is to be played.

Note: You can select more than one SPK-WFADAPTOR (or speaker) for the playback. Please refer to the

App for further options.

The App offers the following playback options:

Party mode

Various smart devices add music tracks via the App from a shared playlist which is played on the

SPK-WFADAPTOR (or speaker).

Multi-zone mode

Various smart devices add music tracks via the App from different playlists which are played on

different SPK-WFADAPTOR (or speakers).

Multi-room mode

Several SPK-WFADAPTOR (or speakers) are combined via the App to form a group and a playlist is

played from a smart device on all the SPK-WFADAPTOR (or speakers) in this group.

Playback in the direct mode

Power on the SPK-WFADAPTOR and the speaker. The SPK-WFADAPTOR will enter Direct Mode

automatically. Or Press the SET (RESET/WPS MODE) button for 5 sec’s in order to switch the

SPK-WFADAPTOR / Speaker to direct mode and the White LED will flashing rapidly.

Connect the smart device directly to your SPK-WFADAPTOR.

Select a music source on your smartphone/ tablet and then select the SPK-WFADAPTOR / speaker as

the medium on which the music is to be played.

Note: Playback in Party, Multi-zone or Multi-room mode is not available in direct mode. When using

direct mode, please remember to switch off the ‘Auto-Login’ and ‘Auto-Join” function on smartphone,

to avoid smartphone trying to connect with a valid network.

QUICK USER MANUAL SPK-WFADAPTOR

Resetting to factory settings

Press and hold the SET button down for about 5 seconds in order to restore the factory settings.

The SPK-WFADAPTOR will restart and the LED will flash white rapidly. Then the white LED will flash

slowly to indicate that Wi-Fi mode is active and the SPK-WFADAPTOR is ready to connect to the

network.

NOTE: Please note that all the settings, e.g. the network WEP key, will be erased and will need to be

input again after the product has been reset.

Warranty Against Defects

Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and

workmanship for 12 months, from the date of purchase, provided that the product is used in accordance

with accompanying recommendations or instructions where provided. The benefit of this warranty is in

addition to your rights under the Australian Consumer Law and to other rights and remedies of the consumer

under a law in relation to the goods or services to which the warranty relates.

Through a network of retailers and resellers, Laser will provide you with your choice of a repair, exchange

(where possible) or refund (within Dead on Arrival period) for this product if it becomes defective within the

warranty period.

This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, normal

wear and tear, neglect or improper storage. Please retain your receipt as proof of purchase

How to make a product warranty claim:

Step 1: Find your receipt which proves the date of purchase. Where the date of purchase cannot be

verified, your place of purchase or Laser will make an assessment based on the date of manufacture, the

condition of the Laser Product and the type of defect.

Step 2a): Contact your place of purchase. They will assess the nature of the fault and repair, replace or fund

the product as per their store refund or warranty policy.

Step 2b): If your place of purchase cannot be contacted, then you can contact Laser. Customer Service

with details of your defective Laser Product: Phone: (02) 9870 3388; or Email: support@laserco.com.au or

online at www.laserco.com.au/warranty (click on “Consumers (End Users)”). Our business address is at 1/6-8

Byfield Street, North Ryde, NSW 2113

Step 3: Laser will issue you with a Return Authorisation (RA) number within 48 hours. When requested,

send us the defective Product and a copy of your receipt. Laser will cover the cost of the return delivery.

Step 4: Wait for us to contact you. Once we have received your defective Laser Product for inspection,

we will inform you of our assessment of your claim within 7 days. When we contact you, we will firstly let

you know whether you have a valid claim under this Warranty, and if so, we will inform you whether your

defective Laser Product will be replaced or repaired, together with the number of days you can expect to

wait to receive your replaced or repaired Laser Product.

Step 5: For further details on warranty cover and returns, please check Terms and Conditions for Warranty

Returns section on http://www.laserco.com.au/warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are

entitled to a replacement or refund for a major failure and compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to

be of acceptable quality and the failure does not amount to a major failure.

Laser SPK-WFADAPTOR User manual

Brand: Laser

Model: SPK-WFADAPTOR

Category: Networking

Type: User manual

Download PDF

report

Laser SPK-WFADAPTOR User manual

Laser SPK-WFADAPTOR User manual

Related papers

Other documents