Samsung WAM751 User manual

Wireless Audio - Multiroom

M7/M5/M3

User Manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

WAM750/WAM751

WAM550/WAM551

WAM350/WAM351

Contents

GETTING STARTED

Accessories ................................................4

Top Panel .................................................... 5

Rear Panel ..................................................6

Connecting the Power Cable (WAM750,

WAM751 Only) ............................................9

Connecting the Cover-Stand (WAM750,

WAM751 Only) ..........................................10

Separating the Cover-Stand (WAM750,

WAM751 Only) ..................................................11

Installing on a Wall (WAM750, WAM751

Only) .........................................................12

Attaching the toroidal ferrite core to the

power cord of the M7 (WAM750,

WAM751 Only) ..........................................13

Looping the power cable around the toroidal

ferrite core .........................................................13

Connecting the Stand (WAM550,

WAM551, WAM350, WAM351 Only) .........14

Installing on a Wall (WAM550, WAM551,

WAM350, WAM351 Only) .........................14

Standby Mode ..........................................15

Reset your product ...................................15

CONNECTING TO THE WI-FI

NETWORK

Preparing connection ................................16

Installing the Samsung Multiroom App ...............16

Accessing the Samsung Multiroom App ............16

Connecting to Wi-Fi ..................................17

Connecting to Wi-Fi automatically (Android/iOS)

..17

Connecting to Wi-Fi manually (Android) ..............19

Connecting to Wi-Fi manually (iOS) ....................21

Connecting with a HUB (Not Included) ......24

Adding a HUB ...................................................27

Adding additional speaker(s) .....................28

CONNECT WITH BLUETOOTH

FUNCTION

Connecting to Bluetooth Devices ..............30

Connecting with NFC function (WAM750,

WAM751, WAM550, WAM551 Only) -

Android .....................................................31

Connecting to the AUX IN (WAM750,

WAM751 Only) ..........................................32

USING THE SAMSUNG

MULTIROOM APP

App at a glance .........................................33

Playing Music ............................................ 34

Playing a music file stored in the smart device ...34

Listen to the music through the phone speaker

..35

Listening to streaming music .............................36

Listening to the internet radio ....................37

Following a station ............................................. 38

Setting Presets ..................................................39

2

4

Connecting TV to the speaker ...................40

Connecting to TV via Bluetooth

(TV SoundConnect) ...........................................40

Connecting to TV via Wi-Fi .................................42

Listening to music from other devices in

network .............................................................42

Using playback menu ................................43

Adjusting Equaliser and DRC .............................44

Managing a queue ............................................. 45

Managing a playlist ............................................47

Using the Settings menu ...........................50

Add Speaker .....................................................50

Guide.................................................................51

Services .............................................................51

Speaker Mode ................................................... 52

Device Settings ..................................................52

Clock ................................................................. 55

Support .............................................................57

Information ........................................................57

CONNECTING MULTIPLES

PRODUCTS

Setting Groups .......................................... 58

Setting the Surround Sound Mode ............60

USING MISCELLANEOUS

FUNCTIONS

Playing Media Content Saved in a PC .......62

Samsung Link ....................................................62

Wireless Audio - Multiroom for Desktop .............63

APPENDIX

Troubleshooting ........................................65

Open Source License Notice ..................... 67

Licences ...................................................67

Specifications ............................................68

Regulatory Compliance Statements ..........71

Warning ............................................................. 71

CAUTION ..........................................................71

Wiring the Main Power Supply Plug (UK Only) ....72

Important Safety Instructions .............................72

Safety precautions ....................................73

Power Supply Precautions ................................. 73

Installation Precautions ......................................74

Usage Precautions............................................. 74

Cleaning Precautions .........................................75

Additional Information ...............................75

About NFC (WAM750, WAM751, WAM550,

WAM551 Only) - Android ...................................75

About the Network Connection ..........................76

Compatible devices ...........................................76

Copyright ..................................................76

3

4

Getting Started

A

Accessories

Confirm you have the supplied accessories shown below.

• WAM750, WAM751

Power cord Cover-Stand Toroidal ferrite core

User Manual Getting started

• WAM550, WAM551

Power Adapter Stand User Manual Getting started

• WAM350, WAM351

Power cord Stand User Manual

4

A

Top Panel

• WAM750, WAM751, WAM550, WAM551

1

NFC Tag

Connect your NFC compatible device via Bluetooth to the product using the simple

NFC tagging procedure. (WAM750, WAM751, WAM550, WAM551 Only) - Android

2

Internet Radio

Preset button

Press this button to listen to an Internet radio station. Each time you press this

button, the product switches to the next default station, cycling through the 3 default

stations.

3

Bluetooth button

Press this button to enable Bluetooth.

4

TV SoundConnect

button

Press this button to enable TV SoundConnect.

5

Volume Control

button

Controls the volume level.

Touch and drag softly with your finger to make adjustments.

This will not work if you press with excessive force.

6

Mute button

Mutes the sound from this product. Press again to restore the sound to the previous

volume level.

NOTES

9

When you turn on the product, touch buttons appear on its top panel.

9

Press and hold the

Mute button for more than 5 seconds to place the product into Standby Mode.

9

Press and hold the

TV SoundConnect button for more than 5 seconds to reset the TV SoundConnect

and connect a new TV.

9

You can listen to a radio station by pressing the

Internet Radio Preset button on the top panel of the

product. Each time you press this button, the product switches to the next default station, cycling through

the 3 default stations.

9

Enable your smart device's Bluetooth by touching it to the

NFC Tag on the top panel of the product.

(WAM750, WAM751, WAM550, WAM551 Only) - Android

• WAM350, WAM351

5

4

VOLUME

q

wer t y

A

Rear Panel

• WAM750, WAM751

1

SPK ADD button

(Speaker Add)

Press this button to add an M7 to your network.

2

WPS/Wi-Fi SETUP

button

Press this button to connect your M7 to your network using WPS or Wi-Fi setup.

3

AUX IN

Lets you connect the M7 to the analog output of a smart device.

4

SERVICE

For service only. Lets service technicians update the firmware of the M7.

5

ETHERNET

Lets you connect the M7 to your network using a LAN cable.

6

POWER

Connection for the M7's power cord.

NOTES

9

SPK ADD Button: Press for 1 second to pair your M7 with a HUB.

9

WPS / Wi-Fi SETUP Button:

- Press for 1 second to connect the M7 to your wireless router using WPS.

- Press and hold down for more than 5 seconds to connect the M7 to your network through your smart

device using the Wi-Fi Setup method.

6

4

SPK ADD

WPS /

Wi-Fi SETUP

AUX IN

SERVICE

ETHERNET

POWER

SPK ADD

WPS /

Wi-Fi SETUP

AUX IN

SERVICE

ETHERNET

POWER

SPK ADD

WPS /

Wi-Fi SETUP

AUX IN

SERVICE

ETHERNET

POWER

q

w

e

r

t

y

• WAM550, WAM551

7

4

1

SPK ADD button

(Speaker Add)

Press this button to add an M5 to your network.

2

WPS/Wi-Fi SETUP

button

Press this button to connect your M5 to your network using WPS or Wi-Fi setup.

3

Wall Mount

You can purchase a wall-mount to hang your product on the wall.

(For more information, please refer to page 14.)

Click here.

4

SERVICE

For service only. Lets service technicians update the firmware of the M5.

5

ETHERNET

Lets you connect the M5 to your network using a LAN cable.

6

POWER

Connection for the M5's power adapter.

NOTES

9

SPK ADD Button: Press for 1 second to pair your M5 with a HUB.

9

WPS / Wi-Fi SETUP Button:

- Press for 1 second to connect the M5 to your wireless router using WPS.

- Press and hold down for more than 5 seconds to connect the M5 to your network through your smart

device using the Wi-Fi Setup method.

SPK ADD

Wi-Fi SETUP

WPS

SERVICE

ETHERNET

POWER

DC 14V 2.5A

SPK ADD

Wi-Fi SETUP

WPS

SERVICE

ETHERNET

POWER

DC 14V 2.5A

q

w

r

e

t

y

• WAM350, WAM351

8

4

1

SPK ADD button

(Speaker Add)

Press this button to add an M3 to your network.

2

WPS/Wi-Fi SETUP

button

Press this button to connect your M3 to your network using WPS or Wi-Fi setup.

3

Wall Mount

You can purchase a wall-mount to hang your product on the wall.

(For more information, please refer to page 14.)

Click here.

4

SERVICE

For service only. Lets service technicians update the firmware of the M3.

5

ETHERNET

Lets you connect the M3 to your network using a LAN cable.

6

POWER

Connection for the M3's power cord.

NOTES

9

SPK ADD Button: Press for 1 second to pair your M3 with a HUB.

9

WPS / Wi-Fi SETUP Button:

- Press for 1 second to connect the M3 to your wireless router using WPS.

- Press and hold down for more than 5 seconds to connect the M3 to your network through your smart

device using the Wi-Fi Setup method.

SPK ADD

Wi-Fi SETUP

WPS

SERVICE

SPK ADD

Wi-Fi SETUP

WPS

SERVICE

ETHERNET

POWER

ETHERNET

POWER

q

w

r

e

t

y

A

Connecting the Power Cable (WAM750, WAM751 Only)

1 Remove the rear cover.

2 Insert the power cable through the rear cover hole

into the M7 power port.

3 Close the rear cover.

NOTE

9

When completing network setup, close the rear cover.

9

4

SPK ADD

WPS /

Wi-Fi SETUP

AUX IN

SERVICE

ETHERNET

POWER

SPK ADD

WPS /

Wi-Fi SETUP

AUX IN

SERVICE

ETHERNET

POWER

SPK ADD

WPS /

Wi-Fi SETUP

AUX IN

SERVICE

ETHERNET

POWER

A

Connecting the Cover-Stand (WAM750, WAM751 Only)

1 Before attaching the Cover-Stand, remove the

rear cover.

Insert the power cable through the Cover-Stand

hole into the M7 power port.

2 The inside of the Cover-Stand has two sides.

One side (A) has four tabs - two large tabs and

two small tabs. The other side (B) has two large

tabs only. Insert the two large tabs on side A into

the two slots in the area marked A in the diagram.

3 Turn the M7 so the side marked B in the diagram

is facing you. With the thumbs of both hands,

press side B of the Cover-Stand so that the tabs

on side B snap into the slots in the area marked B

in the diagram. You may need to press side B of

the Cover-Stand with some force.

4 The M7 can now be installed vertically.

Caution

9

Do not place the M7 on an unstable surface.

NOTES

9

Turn the speaker upright using the stand to set the

speaker to MONO mode.

9

Turning the product upright or laying it down in the

middle of playing music may temporarily cause unstable

sound.

10

44

VOLUME

A

VOLUME

B

➡

❚

Separating the Cover-Stand (WAM750, WAM751 Only)

1 Locate the Cover-Stand's handle. See the diagram

on the right.

2 Push the Cover-Stand's handle while applying

force to the Cover-Stand in the direction of the

arrow.

Important : Push the Cover-Stand straight ahead,

parallel to the surface of the M7. You may need to

use some force.

3 The tabs release and the Cover-Stand separates

as shown in the figure.

NOTES

9

Do not lift up the M7 by the stand. It may separate from the stand and cause damage or personal injury.

9

When installing the M7 vertically, please make sure to use the stand.

If you do not, vibrations from the M7's speakers may cause the M7 to tip over or fall, damaging it.

11

44

➡

A

Installing on a Wall (WAM750, WAM751 Only)

Warning

9

Please have a qualified installer install the Wall Mount Bracket.

9

Check the strength of the wall before you install the Wall Mount Bracket. If the strength is insufficient,

make sure to reinforce the wall before installing the Wall Mount Bracket and the M7 on the wall.

9

Samsung Electronics is not liable for any damage to the product due to the product being installed

inappropriately.

9

After the installation is complete, do not hang on the M7 and avoid striking it or subjecting it to severe

impact. When reinstalling the Wall Mount Bracket and M7 in another location, use the same screws

as those supplied with the Wall Mount Bracket. (You can buy the screws from your product provider.)

1 Finish pairing the M7, and then make sure the App plays music properly through the

M7.

2 Close the back cover of the M7.

3 Install the Wall Mount Bracket (sold separately). You can mount it vertically or

horizontally. Follow the directions that come with the Bracket.

4 Fit the M7 into the corresponding slots of the Wall Mount Bracket.

The installation is complete.

NOTE

9

For more information, please refer to the Wall Mount's Quick Setup Guide.

12

44

or

A

Attaching the toroidal ferrite core to the power cord of the M7

(WAM750, WAM751 Only)

Attaching the Toroidal ferrite core to the power cord of the M7 helps prevent RF interference

from radio signals.

1 Pull the fixing tab of the Toroidal ferrite core to open it.

2 Make a loop around the core with the power cable of the M7.

3 Attach the toroidal ferrite core to the M7 power cord as shown in the figure, and then

press it until it clicks.

❚

Looping the power cable around the toroidal ferrite core

➧ ➧ ➧

•

Lift up to

release the

lock and open

the core.

• Make a loop around

the core with the

power cable.

NOTE

9

It is better to attach Toroidal ferrite cores at each end of the cable, one close to the wall plug and another

close to the terminal where it connects to the M7.

13

44

SPK ADD

WPS /

Wi-Fi SETUP

AUX IN

SERVICE

ETHERNET

POWER

A

Connecting the Stand

(WAM550, WAM551, WAM350, WAM351 Only)

• Insert the stand into slot A of the

M5/M3.

• Tighten a screw at B. • The M5/M3 can now be installed

vertically.

Caution

9

Do not place the M5/M3 on an unstable surface.

NOTES

9

Turn the speaker upright using the stand to set the speaker to MONO mode. (WAM550, WAM551 Only)

9

Turning the product upright or laying it down in the middle of playing music may temporarily cause

unstable sound.

A

Installing on a Wall

(WAM550, WAM551, WAM350, WAM351 Only)

You can purchase your preferred wall-mount additionally to install the product on a wall if you want.

`

Considerations for purchasing

For weight and hole size, refer to page 69.

Click here.

- Endurable load : Above 5.1 lbs (2.3kg)

- Hole size : 1/4 - 20 threaded insert

NOTES

9

Since Wall-mount installation is optional, you should additionally purchase corresponding accessories

9

Please have a qualified installer install the Wall Mount Bracket.

9

Ask professional installation company to mount your product on the wall.

9

Check the strength of the wall before you install the Wall Mount Bracket. If the strength is insufficient,make

sure to reinforce the wall before installing the Wall Mount Bracket and the M5/M3 on the wall.

9

For more information, please refer to the Wall Mount's manual.

9

Samsung Electronics is not liable for any damage to the product due to the product being installed

inappropriately.

➧ ➧

14

44

A

Standby Mode

`

In Wi-Fi / Bluetooth / TV SoundConnect mode

- The product switches to Standby mode if there is no operation (music playing, button

operation, app use) for 15 minutes.

`

In AUX mode (WAM750, WAM751 Only)

- The M7 switches to the Standby mode if there is no button operation (either from the top

panel or from the app) for 8 hours.

NOTES

9

While playing music in the Wi-Fi, Bluetooth, or TV SoundConnect connection modes, the product will

not switch to the Standby mode.

9

While playing music in AUX mode, it may switch to the Standby mode. (WAM750, WAM751 Only)

9

To switch to the Standby mode manually, press and hold the

Mute button for more than 5

seconds.

A

Reset your product

1 Press and hold both the Internet Radio Preset and Mute buttons for more than

5 seconds to reset the product.

2

The Touch button on the product will blink twice.

3 Press and hold the

Internet Radio Preset

button for more than 5 seconds to reboot

the product.

NOTE

9

Resetting erases all information stored in the product.

15

44

A

Preparing connection

1 Requirements: Wireless Router, Smart Device

2 The wireless router should be connected to the Internet.

3 The smart device should be connected to the router via a Wi-Fi connection.

❚

Installing the Samsung Multiroom App

To use the product, you must download and then install the Samsung Multiroom App by

accessing the app through Google play or App Store.

With the Samsung Multiroom App installed, you can play music stored in your smart device,

from connected devices and other content providers, and from Internet radio stations through

the product.

Android iOS

Market search : Samsung Multiroom

ANDROID APP ON

Market search : Samsung Multiroom

ANDROID APP ON

❚

Accessing the Samsung Multiroom App

NOTE

9

Please terminate the Samsung Multiroom App when speaker are not used because the battery of your

smart device can be consumed quickly if the app is working.

Connecting to the Wi-Fi network

Wireless RouterInternet Smart Device

16

44

Samsung

Multiroom

A

Connecting to Wi-Fi

❚

Connecting to Wi-Fi automatically (Android/iOS)

1 Plug the product into an electrical outlet.

2 On your Smart device, select the Samsung Multiroom app.

3 Run the Tutorial if you want, and then press Done.

4 Press Connect Now.

• It searches for the device available for pairing.

VOLUME

POWER

SPK ADD

Wi-Fi SETUP

WPS

ETHERNET

POWER

DC 14V 2.5A

Wireless Router

<WAM550, WAM551><WAM750, WAM751,

WAM350, WAM351>

17

44

5 Once an available device is found, it attempts to connect to the wireless network.

In case of secure network, the password prompt appears on the smart device screen.

Use the on-screen keyboard to enter the password.

• Depending on the network environments, the product(s) may not be automatically

connected. In such cases, select the Manual, and then proceed the next steps by

referring to pages 19~23.

Click here.

6 Press Done.

• Network connection is completed.

NOTES

9

To connect to your wireless network safely, you must enter the valid password.

- For connecting to the home or work wireless network, consult your service provider or the network

administrator.

9

If the product fails to connect to a network or the network connection does not work normally, move the

product closer to the hub or router, and then try again.

9

The distance between devices or obstruction and interference from other wireless devices may

influence communication between the product and network.

9

This product may be found by some other Wi-Fi devices. However, they are not allowed to connect to

this product.

9

Once the Wi-Fi connection is established initially, it is maintained unless the wireless router is replaced

or its network settings are changed.

18

44

❚

Connecting to Wi-Fi manually (Android)

Depending on the network environments, the product(s) may not be automatically connected.

In that case, you can set up the product manually to connect to the network.

1 If the automatic setup fails, select the Manual.

2 Press and hold the WPS/Wi-Fi SETUP button on the back of your product for more than

5 seconds to configure the Wi-Fi Setup.

• The product can wait for 2 minutes in its standby mode until the Wi-Fi connection is

established.

WPS /

Wi-Fi SETUP

POWER

SPK ADD

Wi-Fi SETUP

WPS

ETHERNET

POWER

DC 14V 2.5A

SPK ADD

Wi-Fi SETUP

WPS

ETHERNET

POWER

VOLUME

Wireless Router

<WAM750, WAM751>

<WAM550, WAM551> <WAM350, WAM351>

WPS/Wi-Fi SETUP button

19

44

3 On your smart device, press Next.

• It searches for the device available for pairing.

4 Once an available device is found, the product tries to connect to the newly found smart

device first, then it attempts to connect to the wireless network.

In case of secure network, the password prompt appears on the smart device screen.

Use the on-screen keyboard to enter the password.

5 Press Done.

• Network connection is completed.

To connect to

another wireless

network, press

this.

20

44

Page is loading ...

Samsung WAM751 User manual

This manual is also suitable for

Samsung WAM751 User manual

Related papers

Other documents