2. BLOTZ
  3. B28-SFC-003

BLOTZ B28-SFC-003, B28-SFC-013 Assembly Instructions

  • I have reviewed the instructions for the BLOTZ B28-SFC-003 stairs. The document details the assembly process, including gluing the supports, steps, and attaching the handrails. I'm ready to answer any questions you have about assembling these stairs.
  • What kind of glue is required?
    What tools are needed for assembly?
    What can help keep pieces together while the glue dries?
28mm Stairs – 2 level
B28-SFC-003
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and
remember to cut away from yourself at all times.
During the construction of this model, you may find it convenient to use pegs / elastic bands to hold pieces in
place while you allow glue to dry.
Take the two main supports and top step from the
sprue.
Glue them together as shown above.
Take the rest of the steps.
Glue to them to the supports.
Remove the handrails from the sprue.
Clip them to the ends of the steps.
The finished stairs.
/