MULTIPLEX MD-150, MD-200, and MD-250 Medallion Replacement Installation guide

Brand: MULTIPLEX

Model: MD-150, MD-200, and MD-250 Medallion Replacement

Type: Installation guide

This manual is also suitable for

MD-150, MD-200, and MD-250 Medallion Replacement (IN-SV04-02)

IN-SV04-02

REV 04/30/04

If you have any questions concerning this bulletin, please contact Manitowoc Beverage Equipment’s Technical Service Department at (800) 367-4233

Foodservice Group

MD-150, MD-200, and MD-250

Duratran/Medallion Replacement

FIGURE 1

Knurl Screws

Tools Required

z 6 in 1 screw driver

1. Disconnect power to the dispenser.

2. Remove full lid or manual fill lid from unit.

3. Remove the 2 Knurl screws from top of merchandiser.

(See Figure 1)

4. Remove the merchandiser from the unit. (See Figure 2)

5. Remove the seven screws from around the outer top and

bottom edges of the merchandiser. (See Figures 3&4)

(The screws are threaded into rubber bumpers inside the

merchandiser. This will free the medallion for removal)

(See Figure 5)

6. Remove the existing medallion from the merchandiser.

(See Figure 6)

FIGURE 2

FIGURE 3

3 Bumber Screws on top of merchandiser

IN-SV04-02

REV 04/30/04

If you have any questions concerning this bulletin, please contact Manitowoc Beverage Equipment’s Technical Service Department at (800) 367-4233

Foodservice Group

MD-150, MD-200, and MD-250

Duratran/Medallion Replacement

FIGURE 6

7. Place the new medallion into the merchandiser. (Be sure

the medallion is right side up.)

8. Replace the seven outer screws and bumpers into the

merchandiser (Screws go on the outside of the merchan-

diser and bumpers go inside of the merchandiser. The

bumpers are what the screws thread into.)

9. Replace the merchandiser in reverse order.

10. Re-install lid.

11. Reconnect power to the dispenser.

FIGURE 4

4 Bumper Screws on bottom of merchandiser

FIGURE 5

Rubber Bumpers

MULTIPLEX MD-150, MD-200, and MD-250 Medallion Replacement Installation guide

Brand: MULTIPLEX

Model: MD-150, MD-200, and MD-250 Medallion Replacement

Type: Installation guide

This manual is also suitable for

MD-150, MD-200, and MD-250 Medallion Replacement (IN-SV04-02)

Download PDF

report

MULTIPLEX MD-150, MD-200, and MD-250 Medallion Replacement Installation guide

This manual is also suitable for

MULTIPLEX MD-150, MD-200, and MD-250 Medallion Replacement Installation guide

Related papers

Other documents