Axim X30

Dell Axim X30 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Dell Axim X30 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Features
Dell
Axim
X30
1. Install the battery.
2. Connect the AC adapter and
charge the device for at least
8 hours for the first charge.
NOTICE: To avoid damaging the
connector, perform the following step
before pulling the connector out of
the device.
3. After the battery is charged,
remove the AC adapter by
pressing the two buttons on the
sides of the connector to release
the self-lock structure.
4. Press the power button and follow
the instructions on the screen.
NOTICE: First charge the battery for
at least 8 hours.
| |
Charge the Battery First
| |
CAUTION:
Before you set up and
operate your device, read and
follow the safety instructions in the
System Information Guide.
1. scroll dial
2. headphone connector
3. touch screen
4. microphone
5. infrared sensor
6. Secure Digital card slot
7. power button
8. wireless antenna (optional)
9. stylus (extended)
10. battery lock
11. battery
12. reset button
13. speaker
14. wireless or Microsoft Windows
Media
®
Player on/off button
15. Home button
16. Messaging button
17. navigator button
18. Contacts button
19. Calendar button
20. record button
0W4714A00
www.dell.com | support.dell.com
Use Microsoft ActiveSync to
synchronize the data on your device
with the data on your computer.
1. Insert the Dell Companion CD.
2. Click Getting Started and click
Start Here.
3. Install and configure Microsoft
Outlook only if it is not already
installed and configured on your
computer and you do not have a
more recent version.
4. Click Install ActiveSync,
click Install, and then follow
the instructions on the screen.
5. When prompted, use the
instructions on the reverse side
to connect your device.
See ActiveSync Help on your
computer for more information.
2
1
| |
Install Microsoft
®
ActiveSync
®
3
2
1
16
15
14
13
17
18
19
20
12
11
10
5
6
7
8
9
4
2
1
NOTICE: Do not connect your device to
the computer until the instructions
prompt you to do so.
NOTICE: Do not connect your device to
the computer until the instructions
prompt you to do so.
3
3
Finding Information
Dell Owner’s Manual
Setting up and using
your device.
Microsoft Pocket PC
Help — Tap Start
Help.
Dell Companion CD —
Additional programs that
you can install.
ActiveSync Help — Click
Help
Microsoft
ActiveSync Help on
your computer.
Rotate the scroll dial to
move the cursor and press
in to perform actions
similar to pressing
<Enter> on a keyboard.
To adjust the brightness,
press and hold the scroll
dial and press the top
or bottom of the
navigator button.
To dim the display, press
and hold the power
button. Repeat to light
the display.
Connect the Sync Cable OR the Cradle
| |
Information in this document is subject to change without notice.
© 2004 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is
strictly forbidden.
Dell, the DELL logo, and Axim are trademarks of Dell Inc.; Microsoft, Windows Media,
and ActiveSync are registered trademarks of Microsoft Corporation. Dell disclaims
proprietary interest in the marks and names of others.
March 2004
Printed in China.
Sync Cable
Connect the USB connector
on the end of the sync cable to
your computer.
NOTICE: To avoid damaging the
connector, perform the following step
before pulling the connector out of
the device.
To remove the sync cable from the
device, press the two buttons on
the sides of the connector to
release the self-lock structure.
Cradle Cable
Connect the USB connector
on the end of the cradle cable to
your computer.
4
Additional Information
| |
3
Docking With
the Cradle
Keep the front of the
device flush with the
front of the cradle, and
lower the device until
it is firmly seated in
the cradle. When the
device is docked, the
DELL logo on the
cradle lights up and
the connection status
icon appears on the
command bar.
OR
|
| | Korean
/