Panasonic ER1421 Operating instructions

ER1421
Panasonic
Brand
Panasonic
Model
ER1421
Category
Hair trimmers & clippers
Type
Operating instructions

This manual is also suitable for

Panasonic ER1421 is a professional hair clipper designed for barbers and hair stylists. It features a powerful motor and a durable blade system that can cut through thick hair effortlessly. The ER1421 also comes with a variety of combs to help you achieve the desired hair length. With a charging time of just 1 hour, the ER1421 offers up to 80 minutes of cordless operation, making it ideal for busy professionals.

Panasonic ER1421 is a professional hair clipper designed for barbers and hair stylists. It features a powerful motor and a durable blade system that can cut through thick hair effortlessly. The ER1421 also comes with a variety of combs to help you achieve the desired hair length. With a charging time of just 1 hour, the ER1421 offers up to 80 minutes of cordless operation, making it ideal for busy professionals.

Operating Instructions
AC/Rechargeable Professional Hair Clipper
Model No. ER1421/ER1411
Before operating this unit, please read these instructions completely.
English 2
Deutsch 7
Français 12
Italiano 17
Nederlands 22
Español 27
Dansk 32
Português 37
Norsk 42
Svenska 47
Suomi 52
Polski 57
Česky 62
Slovensky 67
Magyar 72
Română 77
Türkçe 82
Upute za uporabu
AC/Profesionalni punjivi aparat za šišanje kose
Model br. ER1421/ER1411
Prije uporabe uređaja u potpunosti pročitajte ove upute.
Hrvatski 2
Hrvatski
2
Važno
►Prije uporabe
Ovaj šišač namijenjen je za profesionalno šišanje kose i brade.
Punite ga 8 sati prije prve uporabe da biste aktivirali ugrađene
punjive baterije. Izvor napajanja uređaja može biti prilagodnik
za izmjeničnu struju ili punjive baterije. Prije uporabe pažljivo i u
cijelosti pročitajte ove upute.
► Punjenje šišača
• Šišač ER1421/ER1411 koristite samo s prilagodnikom RE9-41.
• Ne punite baterije na temperaturi ispod 5° C ili iznad 35° C.
• Ne punite baterije na mjestima izloženima izravnoj sunčevoj
svjetlosti ili blizu izvora topline.
• Pokazatelj statusa punjenja ( ) mogao bi isprva treperiti kada
prvi put punite uređaj ili ako ga niste koristili 6 ili više mjeseci
čak i ako je potpuno napunjen. Nije riječ o kvaru.
• Ako šišač ne namjeravate koristiti dulje razdoblje, punite ga
svakih 6 mjeseci da biste očuvali vijek trajanja baterije.
• Kabel za napajanje ne može se zamijeniti. Ako je oštećen,
prilagodnik za izmjeničnu struju treba baciti.
► Korištenje šišača
• Upozorenje - Držite uređaj na suhom mjestu.
• Šišač se može zagrijati za vrijeme korištenja i/ili punjenja. To je
uobičajena pojava.
• Prije uporabe provjerite jesu li oštrice i nastavci oštećeni.
Zamijenite ih ako su oštećeni.
• Nemojte dopustiti da losion za kovrčanje ili obnovu kose i lak
za kosu dođu u dodir s kućištem ili oštricama. U suprotnom
može doći do pucanja, promjene boje ili korozije.
• Pazite da vam aparat za šišanje ne ispadne na pod.
• Nemojte udarati tvrde predmete oštricama ili nastavcima.
• Nemojte šišati dlaku ljubimaca.
► Čišćenje aparata za šišanje
• Kućište čistite samo krpom koju ste prethodno namočili u vodu
ili otopinu s blagim sapunom.
• Nikada nemojte koristiti kaustične otopine.
• Aparat za šišanje nikada nemojte staviti u vodu.
► Spremanje aparata za šišanje
• Ovim uređajem ne smiju rukovati osobe (uključujući djecu) sa
smanjenim fizičkim, osjetilnim ili mentalnim sposobnostima ili
s nedovoljnim iskustvom i znanjem, osim ako se takve osobe
nalaze pod nadzorom ili ih u uporabu ovoga uređaja upućuju
osobe odgovorne za njihovu sigurnost. Nadgledajte djecu i
nemojte im dopustiti da se igraju ovim uređajem.
• Nemojte preinačavati pomične dijelove.
• Nemojte hvatati kabel za napajanje da biste primili aparat
za šišanje jer bi se mogao odvojiti i dovesti do oštećenja ili
ozljede.
• Ako aparat za šišanje ne radi ispravno, odnesite ga na pregled
u ovlašteni servisni centar.
Tehnički podaci
Izvor napajanja: pogledajte natpisnu pločicu na proizvodu.
(Automatska pretvorba napona)
Napon motora: 2,4 V istosmjerne struje
Vrijeme punjenja: 1 sat
Zračna buka: 64 (dB (A) re 1 pW)
71 (dB (A) re 1 pW)
PRIJE UPORABE U POTPUNOSTI PROČITAJTE SVE
UPUTE.
Hrvatski
3
English
Parts identication
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A Main body
1 0·CHARGE/1 switch
2 Charge status ( )
lamp
3 Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1421
: Charging plug
; Socket
J Comb attachment shelf
ER1421
K Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
3
English
Parts identication
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A
Main body
1 0·CHARGE/1 switch
2 Charge status ( )
lamp
3 Appliance socket
B
Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1421
: Charging plug
; Socket
J Comb attachment shelf
ER1421
K Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
3
English
Parts identication
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A Main body
1
0·CHARGE/1 switch
2
Charge status ( )
lamp
3
Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1421
: Charging plug
; Socket
J Comb attachment shelf
ER1421
K Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
3
English
Parts identication
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A Main body
1 0·CHARGE/1 switch
2 Charge status ( )
lamp
3 Appliance socket
B Blade
4
Mounting hook
5
Cleaning lever
6
Moving blade
7
Stationary blade
C 3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1421
: Charging plug
; Socket
J Comb attachment shelf
ER1421
K Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
3
English
Parts identication
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A Main body
1 0·CHARGE/1 switch
2 Charge status ( )
lamp
3 Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E
15 mm/18 mm comb attachment
F AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1421
: Charging plug
; Socket
J Comb attachment shelf
ER1421
K Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
3
English
Parts identication
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A Main body
1 0·CHARGE/1 switch
2 Charge status ( )
lamp
3 Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C
3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1421
: Charging plug
; Socket
J Comb attachment shelf
ER1421
K Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
8
9
3
English
Parts identication
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A Main body
1 0·CHARGE/1 switch
2 Charge status ( )
lamp
3 Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1421
:
Charging plug
;
Socket
J Comb attachment shelf
ER1421
K Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
3
English
Parts identication
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A Main body
1 0·CHARGE/1 switch
2 Charge status ( )
lamp
3 Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1421
: Charging plug
; Socket
J Comb attachment shelf
ER1421
K Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
3
English
Parts identication
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A Main body
1 0·CHARGE/1 switch
2 Charge status ( )
lamp
3 Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb attachment
D
9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1421
: Charging plug
; Socket
J Comb attachment shelf
ER1421
K Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
3
English
Parts identication
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A Main body
1 0·CHARGE/1 switch
2 Charge status ( )
lamp
3 Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F
AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1421
: Charging plug
; Socket
J Comb attachment shelf
ER1421
K Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
(
) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
3
English
Parts identication
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A Main body
1 0·CHARGE/1 switch
2 Charge status ( )
lamp
3 Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G
Cleaning brush
H
Oil
I
Charging stand ER1421
: Charging plug
; Socket
J Comb attachment shelf
ER1421
K Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
3
English
Parts identication
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A Main body
1 0·CHARGE/1 switch
2 Charge status ( )
lamp
3 Appliance socket
B Blade
4 Mounting hook
5 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F AC adaptor (RE9‑41)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1421
: Charging plug
; Socket
J
Comb attachment shelf
ER1421
K
Connector ER1421
Charging the hair clipper
Charge
Charging with the charging stand ER1421
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.
•
•
•
•
3
Dijelovi
Punjenje aparata za šišanje kose
► Punjenje na postolju za punjenje
1
Umetnite kabel za
napajanje u postolje
za punjenje.
2
Pomaknite prekidač
0·CHARGE/1 na
“0·CHARGE”.
3
Postavite aparat za
šišanje na postolje za
punjenje, a prilagodnik
uključite u strujnu utičnicu.
• Pokazatelj statusa punjenja ( ) svijetli crveno i punjenje
počinje.
• Punjenje je dovršeno kada pokazatelj statusa punjenja
( ) treperi crveno jednom u sekundi. (maksimalno 1 sat
kasnije)
• 10 minuta nakon dovršetka punjenja pokazatelj statusa
punjenja ( ) treperi crveno jednom svake 2 sekunde.
• 1 puna baterija omogućuje otprilike 80 minuta
neprekidnog rada.
Kućište
Prekidač 0·CHARGE/1
Pokazatelj statusa
punjenja ( )
Utičnica aparata
Oštrica
Kukica za postavljanje
Ručica za čišćenje
Pomična oštrica
Nepomična oštrica
Nastavak s češljem
dužine 3 mm/6 mm
Nastavak s češljem dužine 9
mm/12 mm
Nastavak s češljem dužine 15
mm/18 mm
Prilagodnik za izmjeničnu struju
(RE9-41)
Kabel za napajanje
Utikač aparata
Četkica za čišćenje
Ulje
Postolje za punjenje
Utikač za punjenje
Utičnica
Utor za nastavke s češljem
Priključak
Punjenje
Hrvatski
4
Spajanje utora za nastavke s češljem na postolje za punjenje
Odredite mjesto spoja za postolje za
punjenje i utor za nastavke s češljem.
Čvrsto umetnite priključak u utor na
dnu postolja za punjenje.
• Ako uređaj nije stabilan, dodatno
pogurajte priključak jer nije čvrsto
umetnut.
► Punjenje bez postolja za punjenje
1. Pomaknite prekidač 0·CHARGE/1 na
“0·CHARGE” i umetnite utikač aparata u
aparat za šišanje.
2. Uključite prilagodnik u strujnu utičnicu.
► Rad s prilagodnikom
• Ako spojite prilagodnik za izmjeničnu struju na aparat za šišanje
na isti način kao za punjenje i uključite uređaj, možete ga
koristiti čak i ako je kapacitet baterije nizak.
• Ako aparat za šišanje ne radi, nastavite puniti otprilike 1 minutu.
• Pazite da bateriju ne ispraznite u cijelosti tako da ostavite
uređaj uključenim. To smanjuje vijek trajanja baterije.
Korištenje aparata za šišanje
► Korištenje nastavaka s češljem
1
Odaberite dužinu šišanja
naznačenu s unutarnje
strane i na bočnim stranama
nastavaka.
2
Postavite nastavak na aparat
za šišanje kako je prikazano.
Uklanjanje nastavka iz aparata za
šišanje
Pomaknite jednu stranu nastavka s
uređaja u smjeru naznačene strelice.
Šišanje
4
English
Connecting the comb attachment shelf to the charging
stand ER1421
Determine the connection position for the
charging stand and comb attachment
shelf. Firmly insert the connector into the
slot at the bottom of the charging stand.
If the unit wobbles, then further push in
the connector since it has not been
rmly inserted.
•
Charging without the charging stand
1.Slide the 0·CHARGE/1 switch to “0·CHARGE”,
and insert the appliance plug into the clipper.
2.Plug in the adaptor into a household outlet.
AC operation
If you connect the AC adaptor to the clipper in the same way as for
charging, and turn on the power, you can use it even if the battery
capacity is low.
If the clipper does not operate, charge the clipper for
approximately 1 minute.
•
Be careful not to discharge the battery completely with the power
left turned on. It results in shortening the battery life.
Using the hair clipper
Cut
Using the comb attachments
1
1
Select the trimming heights
indicated on the insides and
sides of the attachments.
2
2
Mount the attachment to the
clipper as illustrated.
Removing the attachment from the clipper
Slide one side of the attachment off the
mounting in direction indicated with the
arrow.
•
4
English
Connecting the comb attachment shelf to the charging
stand ER1421
Determine the connection position for the
charging stand and comb attachment
shelf. Firmly insert the connector into the
slot at the bottom of the charging stand.
If the unit wobbles, then further push in
the connector since it has not been
rmly inserted.
•
Charging without the charging stand
1.Slide the 0·CHARGE/1 switch to “0·CHARGE”,
and insert the appliance plug into the clipper.
2.Plug in the adaptor into a household outlet.
AC operation
If you connect the AC adaptor to the clipper in the same way as for
charging, and turn on the power, you can use it even if the battery
capacity is low.
If the clipper does not operate, charge the clipper for
approximately 1 minute.
•
Be careful not to discharge the battery completely with the power
left turned on. It results in shortening the battery life.
Using the hair clipper
Cut
Using the comb attachments
1
1
Select the trimming heights
indicated on the insides and
sides of the attachments.
2
2
Mount the attachment to the
clipper as illustrated.
Removing the attachment from the clipper
Slide one side of the attachment off the
mounting in direction indicated with the
arrow.
•
4
English
Connecting the comb attachment shelf to the charging
stand ER1421
Determine the connection position for the
charging stand and comb attachment
shelf. Firmly insert the connector into the
slot at the bottom of the charging stand.
If the unit wobbles, then further push in
the connector since it has not been
rmly inserted.
•
Charging without the charging stand
1.Slide the 0·CHARGE/1 switch to “0·CHARGE”,
and insert the appliance plug into the clipper.
2.Plug in the adaptor into a household outlet.
AC operation
If you connect the AC adaptor to the clipper in the same way as for
charging, and turn on the power, you can use it even if the battery
capacity is low.
If the clipper does not operate, charge the clipper for
approximately 1 minute.
•
Be careful not to discharge the battery completely with the power
left turned on. It results in shortening the battery life.
Using the hair clipper
Cut
Using the comb attachments
1
1
Select the trimming heights
indicated on the insides and
sides of the attachments.
2
2
Mount the attachment to the
clipper as illustrated.
Removing the attachment from the clipper
Slide one side of the attachment off the
mounting in direction indicated with the
arrow.
•
4
English
Connecting the comb attachment shelf to the charging
stand ER1421
Determine the connection position for the
charging stand and comb attachment
shelf. Firmly insert the connector into the
slot at the bottom of the charging stand.
If the unit wobbles, then further push in
the connector since it has not been
rmly inserted.
•
Charging without the charging stand
1.Slide the 0·CHARGE/1 switch to “0·CHARGE”,
and insert the appliance plug into the clipper.
2.Plug in the adaptor into a household outlet.
AC operation
If you connect the AC adaptor to the clipper in the same way as for
charging, and turn on the power, you can use it even if the battery
capacity is low.
If the clipper does not operate, charge the clipper for
approximately 1 minute.
•
Be careful not to discharge the battery completely with the power
left turned on. It results in shortening the battery life.
Using the hair clipper
Cut
Using the comb attachments
1
1
Select the trimming heights
indicated on the insides and
sides of the attachments.
2
2
Mount the attachment to the
clipper as illustrated.
Removing the attachment from the clipper
Slide one side of the attachment off the
mounting in direction indicated with the
arrow.
•
Hrvatski
5
English
Blade maintenance
Care
Removing and mounting the blade
Removing the blade
1.Hold the clipper with the switch
facing upward and push the
blade with your thumb while
catching the blade in your other
hand.
Be sure to turn off the power
before you remove the blade.
•
Mounting the blade
1.Fit the mounting hook into
the blade mounting on the
clipper and push in until it
clicks.
Cleaning the blade
1.Brush off
any hairs
from the
clipper and
from around
the blade.
2.Remove the
blade and
brush off
the hairs
from the
blade edge.
3.Brush the hairs out from
between the stationary
blade and the moving
blade while pressing
down on the cleaning
lever to raise the moving
blade.
Lubrication
1.Apply a few drops of the oil to
the space between the
stationary blade and moving
blade.
Apply the oil to the clipper before
and after each use.
2.Remount the blade on the
clipper.
•
5
English
Blade maintenance
Care
Removing and mounting the blade
Removing the blade
1.Hold the clipper with the switch
facing upward and push the
blade with your thumb while
catching the blade in your other
hand.
Be sure to turn off the power
before you remove the blade.
•
Mounting the blade
1.Fit the mounting hook into
the blade mounting on the
clipper and push in until it
clicks.
Cleaning the blade
1.Brush off
any hairs
from the
clipper and
from around
the blade.
2.Remove the
blade and
brush off
the hairs
from the
blade edge.
3.Brush the hairs out from
between the stationary
blade and the moving
blade while pressing
down on the cleaning
lever to raise the moving
blade.
Lubrication
1.Apply a few drops of the oil to
the space between the
stationary blade and moving
blade.
Apply the oil to the clipper before
and after each use.
2.Remount the blade on the
clipper.
•
5
English
Blade maintenance
Care
Removing and mounting the blade
Removing the blade
1.Hold the clipper with the switch
facing upward and push the
blade with your thumb while
catching the blade in your other
hand.
Be sure to turn off the power
before you remove the blade.
•
Mounting the blade
1.Fit the mounting hook into
the blade mounting on the
clipper and push in until it
clicks.
Cleaning the blade
1.Brush off
any hairs
from the
clipper and
from around
the blade.
2.Remove the
blade and
brush off
the hairs
from the
blade edge.
3.Brush the hairs out from
between the stationary
blade and the moving
blade while pressing
down on the cleaning
lever to raise the moving
blade.
Lubrication
1.Apply a few drops of the oil to
the space between the
stationary blade and moving
blade.
Apply the oil to the clipper before
and after each use.
2.Remount the blade on the
clipper.
•
5
English
Blade maintenance
Care
Removing and mounting the blade
Removing the blade
1.Hold the clipper with the switch
facing upward and push the
blade with your thumb while
catching the blade in your other
hand.
Be sure to turn off the power
before you remove the blade.
•
Mounting the blade
1.Fit the mounting hook into
the blade mounting on the
clipper and push in until it
clicks.
Cleaning the blade
1.Brush off
any hairs
from the
clipper and
from around
the blade.
2.Remove the
blade and
brush off
the hairs
from the
blade edge.
3.Brush the hairs out from
between the stationary
blade and the moving
blade while pressing
down on the cleaning
lever to raise the moving
blade.
Lubrication
1.Apply a few drops of the oil to
the space between the
stationary blade and moving
blade.
Apply the oil to the clipper before
and after each use.
2.Remount the blade on the
clipper.
•
5
Uklanjanje i postavljanje oštrice
► Uklanjanje oštrice
1. Držite aparat za šišanje s
prekidačem okrenutim prema
gore, gurnite oštricu palcem i
uhvatite je drugom rukom.
• Provjerite je li uređaj isključen
prije nego što uklonite oštricu.
► Postavljanje oštrice
1. Postavite kukicu za
postavljanje u oštricu i
zatim je gurajte sve dok ne
začujete zvuk klika.
Čišćenje oštrice
Podmazivanje
1. Nanesite nekoliko kapi ulja
između pomične i nepomične
oštrice.
• Nanesite ulje na aparat za
šišanje prije i poslije svake
uporabe.
2. Ponovno postavite oštricu na
aparat za šišanje.
1. Očistite
dlačice iz
aparata
za šišanje
i oko
oštrice.
2. Uklonite
oštricu i
očistite
dlačice
s ruba
oštrice.
3. Očistite sve dlačice
između nepomične
i pomične oštrice,
a pritom pritišćite
ručicu za čišćenje da
biste podigli pomičnu
oštricu.
Održavanje oštrice
Briga
Hrvatski
6
English
Removing the built‑in rechargeable batteries
Remove the batteries as illustrated.
Disconnect the clipper from a household outlet.
Fully discharge the batteries.
Be careful not to short‑circuit the batteries.
WARNING ‑ Do not attempt to replace the batteries for the
purpose of reusing the clipper. This could result in the risk of re
or electric shock.
Important notice regarding environmental protection
The built‑in rechargeable Nickel‑Metal Hydride batteries contain
substances that may be environmentally harmful. Please remove
the batteries before discarding your clipper.
For environmental protection and recycling materials
This clipper contains Nickel‑Metal Hydride batteries.
Please make sure that the batteries are disposed of at an
ofcially assigned location, if there is one in your country.
Please read “Information for Users on Collection and Disposal of
Old Equipment and used Batteries” on page 87.
•
•
•
6
Uklanjanje ugrađenih punjivih baterija
Uklonite baterije kako je prikazano na slici.
• Odspojite aparat za šišanje iz strujne utičnice.
• Ispraznite baterije u potpunosti.
• Nemojte izazvati kratki spoj na baterijama.
UPOZORENJE - Nemojte pokušavati zamijeniti baterije s ciljem
ponovne uporabe aparata za šišanje. To može uzrokovati rizik
od požara ili strujnog udara.
Važna napomena glede zaštite okoliša
Ugrađene punjive nikal-metal hidridne baterije sadrže sastojke
koji mogu biti štetni za okoliš. Molimo uklonite baterije prije
odlaganja aparata za šišanje.
Zaštita okoliša i recikliranje materijala
Ovaj aparat za šišanje sadrži nikal-metal hidridne baterije.
Baterije obavezno odložite na mjesto službeno određeno za tu
namjenu, ako ono postoji u vašoj zemlji.
Pročitajte “Obavijesti za korisnike o prikupljanju i odlaganju
dotrajalih uređaja i baterija” na 87. stranici.
87
English
Information for Users on Collection and Disposal of Old
Equipment and used Batteries
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical
and electronic products and batteries should not be
mixed with general household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to
applicable collection points, in accordance with your
national legislation and the Directives 2002/96/EC and
2006/66/EC.
By disposing of these products and batteries correctly,
you will help to save valuable resources and prevent
any potential negative effects on human health and the
environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of
old products and batteries, please contact your local
municipality, your waste disposal service or the point of
sale where you purchased the items.
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic
equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside
the European Union]
These symbols are only valid in the European Union. If
you wish to discard these items, please contact your
local authorities or dealer and ask for the correct
method of disposal.
Note for the battery symbol (bottom two symbol
examples):
This symbol might be used in combination with a
chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical
involved.
Deutsch
Benutzerinformation zur Sammlung und Entsorgung von
veralteten Geräten und benutzten Batterien
Diese Symbole auf den Produkten, Verpackungen und/
oder Begleitdokumenten bedeuten, dass benutzte
elektrische und elektronische Produkte und Batterien
nicht in den allgemeinen Hausmüll gegeben werden
sollen.
Bitte bringen Sie diese alten Produkte und Batterien zur
Behandlung, Aufarbeitung bzw. zum Recycling gemäß
Ihrer Landesgesetzgebung und den Richtlinien
2002/96/EG und 2006/66/EG zu Ihren zuständigen
Sammelpunkten.
Indem Sie diese Produkte und Batterien
ordnungsgemäß entsorgen, helfen Sie dabei, wertvolle
Ressourcen zu schützen und eventuelle negative
Auswirkungen auf die menschliche Gesundheit und die
Umwelt zu vermeiden, die anderenfalls durch eine
unsachgemäße Abfallbehandlung auftreten können.
Wenn Sie ausführlichere Informationen zur Sammlung
und zum Recycling alter Produkte und Batterien
wünschen, wenden Sie sich bitte an Ihre örtlichen
Verwaltungsbehörden, Ihren
Abfallentsorgungsdienstleister oder an die
Verkaufseinrichtung, in der Sie die Gegenstände
gekauft haben.
Gemäß Landesvorschriften können wegen nicht
ordnungsgemäßer Entsorgung dieses Abfalls
87
English
Information for Users on Collection and Disposal of Old
Equipment and used Batteries
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical
and electronic products and batteries should not be
mixed with general household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to
applicable collection points, in accordance with your
national legislation and the Directives 2002/96/EC and
2006/66/EC.
By disposing of these products and batteries correctly,
you will help to save valuable resources and prevent
any potential negative effects on human health and the
environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of
old products and batteries, please contact your local
municipality, your waste disposal service or the point of
sale where you purchased the items.
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic
equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside
the European Union]
These symbols are only valid in the European Union. If
you wish to discard these items, please contact your
local authorities or dealer and ask for the correct
method of disposal.
Note for the battery symbol (bottom two symbol
examples):
This symbol might be used in combination with a
chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical
involved.
Deutsch
Benutzerinformation zur Sammlung und Entsorgung von
veralteten Geräten und benutzten Batterien
Diese Symbole auf den Produkten, Verpackungen und/
oder Begleitdokumenten bedeuten, dass benutzte
elektrische und elektronische Produkte und Batterien
nicht in den allgemeinen Hausmüll gegeben werden
sollen.
Bitte bringen Sie diese alten Produkte und Batterien zur
Behandlung, Aufarbeitung bzw. zum Recycling gemäß
Ihrer Landesgesetzgebung und den Richtlinien
2002/96/EG und 2006/66/EG zu Ihren zuständigen
Sammelpunkten.
Indem Sie diese Produkte und Batterien
ordnungsgemäß entsorgen, helfen Sie dabei, wertvolle
Ressourcen zu schützen und eventuelle negative
Auswirkungen auf die menschliche Gesundheit und die
Umwelt zu vermeiden, die anderenfalls durch eine
unsachgemäße Abfallbehandlung auftreten können.
Wenn Sie ausführlichere Informationen zur Sammlung
und zum Recycling alter Produkte und Batterien
wünschen, wenden Sie sich bitte an Ihre örtlichen
Verwaltungsbehörden, Ihren
Abfallentsorgungsdienstleister oder an die
Verkaufseinrichtung, in der Sie die Gegenstände
gekauft haben.
Gemäß Landesvorschriften können wegen nicht
ordnungsgemäßer Entsorgung dieses Abfalls
7
Hrvatski
Obavijestizakorisnikeoprikupljanjuiodlaganjudotrajale
opremeibaterija
Ovim se oznakama na proizvodu, ambalaži i/ili
pratećim dokumentima označava da se korišteni
električni i elektronički proizvodi te baterije ne
smiju odlagati s otpadom iz domaćinstava.
Radi pravilne obrade, sanacije i recikliranja
dotrajalih proizvoda i baterija odnesite ih u
odgovarajuća prikupljališta, u skladu s državnim
zakonodavstvom i Direktivama 2002/96/EZ i
2006/66/EZ.
Pravilnim odlaganjem navedenih proizvoda i
baterija čuvate vrijedne resurse i sprečavate
moguće negativne utjecaje na ljudsko zdravlje
i okoliš koji bi mogli nastati zbog neprimjerenog
rukovanja otpadom.
Detaljne informacije o prikupljanju i recikliranju
dotrajalih proizvoda i baterija potražite u lokalnom
poglavarstvu, službi za odlaganje otpada ili na
prodajnom mjestu na kojem ste kupili proizvod.
Za nepropisno odlaganje ovog otpada mogli biste
biti kažnjeni sukladno državnom zakonodavstvu.
Za poslovne korisnike u Europskoj uniji
Ako želite odložiti električnu i elektroničku opremu,
detaljne obavijesti zatražite od prodavača ili
dobavljača.
[Informacije o odlaganju u zemljama izvan
Europske unije]
Ove su oznake važeće samo u Europskoj uniji.
Ako želite odložiti ove uređaje, obratite se
nadležnim lokalnim tijelima ili dobavljačima i
raspitajte se o pravilnom načinu odlaganja.
Napomenaosimbolimanabateriji(donjadva
primjerasimbola):
Ovaj se simbol može koristiti u kombinaciji s
kemijskim simbolom. U tom je slučaju usklađen
sa zahtjevom navedenim u Direktivi za korištene
kemikalije.
Panasonic Electric Works Wanbao (Guangzhou) Co., Ltd.
http://panasonic.hr
F. br.2 HR
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Panasonic ER1421 Operating instructions

ER1421
Panasonic
Brand
Panasonic
Model
ER1421
Category
Hair trimmers & clippers
Type
Operating instructions
This manual is also suitable for

Panasonic ER1421 is a professional hair clipper designed for barbers and hair stylists. It features a powerful motor and a durable blade system that can cut through thick hair effortlessly. The ER1421 also comes with a variety of combs to help you achieve the desired hair length. With a charging time of just 1 hour, the ER1421 offers up to 80 minutes of cordless operation, making it ideal for busy professionals.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents