Panasonic ER1611 Operating instructions
- Category
- Hair trimmers & clippers
- Type
- Operating instructions
Panasonic ER1611: Professional hair clipper for precise and versatile trimming. Adjust cutting length from 0.8 to 15 mm with 5段階 settings using the adjustable dial. The clipper features both corded and cordless operation, allowing for continuous use even when the battery is low. For a quick recharge, simply connect the clipper to the included charging stand. The LED indicator light keeps you informed about the charging status. It also includes a variety of combs for different hair lengths and styles.
Panasonic ER1611: Professional hair clipper for precise and versatile trimming. Adjust cutting length from 0.8 to 15 mm with 5段階 settings using the adjustable dial. The clipper features both corded and cordless operation, allowing for continuous use even when the battery is low. For a quick recharge, simply connect the clipper to the included charging stand. The LED indicator light keeps you informed about the charging status. It also includes a variety of combs for different hair lengths and styles.
Operating Instructions
AC/Rechargeable Professional Hair Clipper
Model No. ER1611
Before operating this unit, please read these instructions completely and save them for future use.
English 2
Deutsch 7
Français 12
Italiano 17
Nederlands 22
Español 27
Dansk 32
Português 37
Norsk 42
Svenska 47
Suomi 52
Polski 57
Česky 62
Slovensky 67
Magyar 72
Română 77
Türkçe 82
Upute za uporabu
AC/Punjivi profesionalni aparat za šišanje kose
Model br. ER1611
Prije korištenja uređaja u potpunosti pročitajte ove upute i sačuvajte ih za buduću uporabu.
Hrvatski 2
Hrvatski
2
Važno
►Prije uporabe
Ovaj aparat za šišanje namijenjen je za profesionalno šišanje
kose i brade. Punite ga 8 sati prije prve uporabe da biste
aktivirali ugrađene punjive baterije. Izvor napajanja uređaja
može biti prilagodnik za izmjeničnu struju ili punjive baterije.
Prije uporabe u cijelosti pročitajte ove upute.
► Punjenje aparata za šišanje
• Aparat za šišanje ER1611 koristite samo s prilagodnikom
RE9-39.
• Ne punite baterije na temperaturi ispod 5 °C ili iznad 35 °C.
• Ne punite baterije na mjestima izloženima izravnoj sunčevoj
svjetlosti ili blizu izvora topline.
• Pokazatelj prazne baterije ( ) mogao bi isprva treperiti
kada prvi put punite uređaj ili ako ga niste koristili 6 ili više
mjeseci čak i ako je potpuno napunjen. Nije riječ o kvaru.
• Čak i ako šišač za kosu ne koristite dulje razdoblje, punite
ga svakih 6 mjeseci da biste očuvali vijek trajanja baterije.
• Kabel za napajanje ne može se zamijeniti. Ako je kabel
oštećen, prilagodnik za izmjenični napon treba baciti.
► Korištenje aparata za šišanje
• Upozorenje - Držite uređaj na suhom mjestu.
• Aparat za šišanje može se zagrijati za vrijeme korištenja i/ili
punjenja. To je uobičajena pojava.
• Prije uporabe provjerite jesu li oštrice i nastavci oštećeni.
Zamijenite ih ako su oštećeni.
• Nemojte dopustiti da losion za kovrčanje ili obnovu kose
i lak za kosu dođu u kontakt s kućištem ili oštricama.
Posljedica toga može biti pucanje, promjene boje ili
korozije.
• Pazite da vam aparat za šišanje ne ispadne na pod.
• Nemojte udarati tvrde predmete oštricama ili nastavcima.
• Nemojte šišati dlaku ljubimaca.
► Čišćenje aparata za šišanje
• Čistite kućište samo krpom koju ste prethodno namočili u
vodu ili otopinu s blagim sapunom.
• Nikada nemojte koristiti kaustične otopine.
• Nikada nemojte uranjati aparat za šišanje u vodu.
► Spremanje aparata za šišanje
• Ovim uređajem ne smiju rukovati osobe (uključujući djecu)
smanjenih fizičkih, osjetilnih ili mentalnih sposobnosti ili
s nedovoljnim iskustvom i znanjem, osim ako se takve
osobe ne nalaze pod nadzorom ili ih u uporabu ovoga
uređaja upućuju osobe odgovorne za njihovu sigurnost.
Nadgledajte djecu i nemojte im dopustiti da se igraju ovim
uređajem.
• Nemojte prepravljati pomične dijelove.
• Nemojte povlačiti aparat za šišanje za kabel za napajanje
jer bi se uređaj mogao odvojiti i dovesti do oštećenja ili
ozljede.
• Ako aparat za šišanje ne radi ispravno, odnesite ga na
pregled u ovlašteni servisni centar.
Tehnički podaci
Izvor napajanja: pogledajte natpisnu pločicu na proizvodu.
(automatski napon)
Napon motora: 2,4 V DC
Vrijeme punjenja: 1 sat
Zračna buka: 60 (dB (A) re 1 pW)
PRIJE UPORABE U CIJELOSTI PROČITAJTE OVE UPUTE.
Hrvatski
3
English
Parts identication
A Main body
1 Trimming height indicator
2 OFF/ON switch
3 Dial (Height adjustment
control)
4 Recharge ( ) lamp
5 Charge status ( ) lamp
6 Appliance socket
B Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
Stationary blade
C Short comb attachment
(3 mm/4 mm)
D Medium comb attachment
(6 mm/9 mm)
E Long comb attachment
(1 mm/15 mm)
F AC adaptor (RE9-39)
; Power cord
Appliance plug
G Cleaning brush
H Oil
Charging stand
Comb attachment shelves
Charging plug
Socket
Charging the hair clipper
Charge
Charge the clipper when recharge ( ) lamp starts to blink. It can
be used for approximately 5 minutes after the recharge ( ) lamp
blinks.
1
1
Connect the power
cord to the charging
stand.
2
2
Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows and charging starts.
Charging is completed when Charge status ( ) lamp
blinks. (Max. 1 hour later)
1 full charge will provide approximately 50 minutes of
continuous operation.
•
•
•
3
English
Parts identication
A
Main body
1 Trimming height indicator
2 OFF/ON switch
3 Dial (Height adjustment
control)
4 Recharge ( ) lamp
5 Charge status ( ) lamp
6 Appliance socket
B Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
Stationary blade
C Short comb attachment
(3 mm/4 mm)
D Medium comb attachment
(6 mm/9 mm)
E Long comb attachment
(1 mm/15 mm)
F AC adaptor (RE9-39)
; Power cord
Appliance plug
G Cleaning brush
H Oil
Charging stand
Comb attachment shelves
Charging plug
Socket
Charging the hair clipper
Charge
Charge the clipper when recharge ( ) lamp starts to blink. It can
be used for approximately 5 minutes after the recharge ( ) lamp
blinks.
1
1
Connect the power
cord to the charging
stand.
2
2
Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows and charging starts.
Charging is completed when Charge status ( ) lamp
blinks. (Max. 1 hour later)
1 full charge will provide approximately 50 minutes of
continuous operation.
•
•
•
3
English
Parts identication
A Main body
1 Trimming height indicator
2 OFF/ON switch
3 Dial (Height adjustment
control)
4 Recharge ( ) lamp
5 Charge status ( ) lamp
6
Appliance socket
B Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
Stationary blade
C Short comb attachment
(3 mm/4 mm)
D Medium comb attachment
(6 mm/9 mm)
E Long comb attachment
(1 mm/15 mm)
F AC adaptor (RE9-39)
; Power cord
Appliance plug
G Cleaning brush
H Oil
Charging stand
Comb attachment shelves
Charging plug
Socket
Charging the hair clipper
Charge
Charge the clipper when recharge ( ) lamp starts to blink. It can
be used for approximately 5 minutes after the recharge ( ) lamp
blinks.
1
1
Connect the power
cord to the charging
stand.
2
2
Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows and charging starts.
Charging is completed when Charge status ( ) lamp
blinks. (Max. 1 hour later)
1 full charge will provide approximately 50 minutes of
continuous operation.
•
•
•
3
English
Parts identication
A Main body
1 Trimming height indicator
2 OFF/ON switch
3 Dial (Height adjustment
control)
4 Recharge ( ) lamp
5 Charge status ( ) lamp
6 Appliance socket
B Blade
7
Mounting hook
8
Cleaning lever
9
Moving blade
Stationary blade
C Short comb attachment
(3 mm/4 mm)
D Medium comb attachment
(6 mm/9 mm)
E Long comb attachment
(1 mm/15 mm)
F AC adaptor (RE9-39)
; Power cord
Appliance plug
G Cleaning brush
H Oil
Charging stand
Comb attachment shelves
Charging plug
Socket
Charging the hair clipper
Charge
Charge the clipper when recharge ( ) lamp starts to blink. It can
be used for approximately 5 minutes after the recharge ( ) lamp
blinks.
1
1
Connect the power
cord to the charging
stand.
2
2
Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows and charging starts.
Charging is completed when Charge status ( ) lamp
blinks. (Max. 1 hour later)
1 full charge will provide approximately 50 minutes of
continuous operation.
•
•
•
3
English
Parts identication
A Main body
1 Trimming height indicator
2 OFF/ON switch
3 Dial (Height adjustment
control)
4 Recharge ( ) lamp
5 Charge status ( ) lamp
6 Appliance socket
B Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
Stationary blade
C Short comb attachment
(3 mm/4 mm)
D Medium comb attachment
(6 mm/9 mm)
E Long comb attachment
(1 mm/15 mm)
F AC adaptor (RE9-39)
; Power cord
Appliance plug
G
Cleaning brush
H
Oil
Charging stand
Comb attachment shelves
Charging plug
Socket
Charging the hair clipper
Charge
Charge the clipper when recharge ( ) lamp starts to blink. It can
be used for approximately 5 minutes after the recharge ( ) lamp
blinks.
1
1
Connect the power
cord to the charging
stand.
2
2
Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows and charging starts.
Charging is completed when Charge status ( ) lamp
blinks. (Max. 1 hour later)
1 full charge will provide approximately 50 minutes of
continuous operation.
•
•
•
3
English
Parts identication
A Main body
1 Trimming height indicator
2 OFF/ON switch
3 Dial (Height adjustment
control)
4 Recharge ( ) lamp
5 Charge status ( ) lamp
6 Appliance socket
B Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
Stationary blade
C Short comb attachment
(3 mm/4 mm)
D Medium comb attachment
(6 mm/9 mm)
E Long comb attachment
(1 mm/15 mm)
F AC adaptor (RE9-39)
;
Power cord
Appliance plug
G Cleaning brush
H Oil
Charging stand
Comb attachment shelves
Charging plug
Socket
Charging the hair clipper
Charge
Charge the clipper when recharge ( ) lamp starts to blink. It can
be used for approximately 5 minutes after the recharge ( ) lamp
blinks.
1
1
Connect the power
cord to the charging
stand.
2
2
Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows and charging starts.
Charging is completed when Charge status ( ) lamp
blinks. (Max. 1 hour later)
1 full charge will provide approximately 50 minutes of
continuous operation.
•
•
•
3
English
Parts identication
A Main body
1 Trimming height indicator
2 OFF/ON switch
3 Dial (Height adjustment
control)
4 Recharge ( ) lamp
5 Charge status ( ) lamp
6 Appliance socket
B Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
Stationary blade
C Short comb attachment
(3 mm/4 mm)
D Medium comb attachment
(6 mm/9 mm)
E Long comb attachment
(1 mm/15 mm)
F AC adaptor (RE9-39)
; Power cord
Appliance plug
G Cleaning brush
H Oil
Charging stand
Comb attachment shelves
Charging plug
Socket
Charging the hair clipper
Charge
Charge the clipper when recharge ( ) lamp starts to blink. It can
be used for approximately 5 minutes after the recharge ( ) lamp
blinks.
1
1
Connect the power
cord to the charging
stand.
2
2
Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows and charging starts.
Charging is completed when Charge status ( ) lamp
blinks. (Max. 1 hour later)
1 full charge will provide approximately 50 minutes of
continuous operation.
•
•
•
3
English
Parts identication
A Main body
1 Trimming height indicator
2 OFF/ON switch
3 Dial (Height adjustment
control)
4 Recharge ( ) lamp
5 Charge status ( ) lamp
6 Appliance socket
B Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
Stationary blade
C Short comb attachment
(3 mm/4 mm)
D Medium comb attachment
(6 mm/9 mm)
E Long comb attachment
(1 mm/15 mm)
F AC adaptor (RE9-39)
; Power cord
Appliance plug
G Cleaning brush
H Oil
Charging stand
Comb attachment shelves
Charging plug
Socket
Charging the hair clipper
Charge
Charge the clipper when recharge ( ) lamp starts to blink. It can
be used for approximately 5 minutes after the recharge ( ) lamp
blinks.
1
1
Connect the power
cord to the charging
stand.
2
2
Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows and charging starts.
Charging is completed when Charge status ( ) lamp
blinks. (Max. 1 hour later)
1 full charge will provide approximately 50 minutes of
continuous operation.
•
•
•
3
English
Parts identication
A Main body
1 Trimming height indicator
2 OFF/ON switch
3 Dial (Height adjustment
control)
4 Recharge ( ) lamp
5 Charge status ( ) lamp
6 Appliance socket
B
Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
Stationary blade
C Short comb attachment
(3 mm/4 mm)
D Medium comb attachment
(6 mm/9 mm)
E Long comb attachment
(1 mm/15 mm)
F AC adaptor (RE9-39)
; Power cord
Appliance plug
G Cleaning brush
H Oil
Charging stand
Comb attachment shelves
Charging plug
Socket
Charging the hair clipper
Charge
Charge the clipper when recharge ( ) lamp starts to blink. It can
be used for approximately 5 minutes after the recharge ( ) lamp
blinks.
1
1
Connect the power
cord to the charging
stand.
2
2
Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows and charging starts.
Charging is completed when Charge status ( ) lamp
blinks. (Max. 1 hour later)
1 full charge will provide approximately 50 minutes of
continuous operation.
•
•
•
3
English
Parts identication
A Main body
1
Trimming height indicator
2
OFF/ON switch
3
Dial (Height adjustment
control)
4
Recharge ( ) lamp
5 Charge status ( ) lamp
6 Appliance socket
B Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
Stationary blade
C Short comb attachment
(3 mm/4 mm)
D Medium comb attachment
(6 mm/9 mm)
E Long comb attachment
(1 mm/15 mm)
F AC adaptor (RE9-39)
; Power cord
Appliance plug
G Cleaning brush
H Oil
Charging stand
Comb attachment shelves
Charging plug
Socket
Charging the hair clipper
Charge
Charge the clipper when recharge ( ) lamp starts to blink. It can
be used for approximately 5 minutes after the recharge ( ) lamp
blinks.
1
1
Connect the power
cord to the charging
stand.
2
2
Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows and charging starts.
Charging is completed when Charge status ( ) lamp
blinks. (Max. 1 hour later)
1 full charge will provide approximately 50 minutes of
continuous operation.
•
•
•
3
English
Parts identication
A Main body
1 Trimming height indicator
2 OFF/ON switch
3 Dial (Height adjustment
control)
4 Recharge ( ) lamp
5
Charge status ( ) lamp
6 Appliance socket
B Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
Stationary blade
C Short comb attachment
(3 mm/4 mm)
D Medium comb attachment
(6 mm/9 mm)
E Long comb attachment
(1 mm/15 mm)
F AC adaptor (RE9-39)
; Power cord
Appliance plug
G Cleaning brush
H Oil
Charging stand
Comb attachment shelves
Charging plug
Socket
Charging the hair clipper
Charge
Charge the clipper when recharge ( ) lamp starts to blink. It can
be used for approximately 5 minutes after the recharge ( ) lamp
blinks.
1
1
Connect the power
cord to the charging
stand.
2
2
Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows and charging starts.
Charging is completed when Charge status ( ) lamp
blinks. (Max. 1 hour later)
1 full charge will provide approximately 50 minutes of
continuous operation.
•
•
•
3
English
Parts identication
A Main body
1 Trimming height indicator
2 OFF/ON switch
3 Dial (Height adjustment
control)
4 Recharge ( ) lamp
5 Charge status ( ) lamp
6 Appliance socket
B Blade
7 Mounting hook
8 Cleaning lever
9 Moving blade
Stationary blade
C
Short comb attachment
(3 mm/4 mm)
D
Medium comb attachment
(6 mm/9 mm)
E
Long comb attachment
(1 mm/15 mm)
F
AC adaptor (RE9-39)
; Power cord
Appliance plug
G Cleaning brush
H Oil
Charging stand
Comb attachment shelves
Charging plug
Socket
Charging the hair clipper
Charge
Charge the clipper when recharge ( ) lamp starts to blink. It can
be used for approximately 5 minutes after the recharge ( ) lamp
blinks.
1
1
Connect the power
cord to the charging
stand.
2
2
Press the OFF/ON
switch to turn off the
power.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows and charging starts.
Charging is completed when Charge status ( ) lamp
blinks. (Max. 1 hour later)
1 full charge will provide approximately 50 minutes of
continuous operation.
•
•
•
3
Dijelovi
Punjenje aparata za šišanje kose
Kada pokazatelj prazne baterije ( ) počne treperiti,
napunite aparat za šišanje. Uređaj možete koristiti još otprilike
5 minuta nakon što pokazatelj prazne baterije ( ) počne
treperiti.
1
Priključite kabel za
napajanje na postolje
za punjenje.
2
Pritisnite prekidač
za isklj./uklj. da biste
isključili uređaj.
3
Postavite aparat za
šišanje na postolje za
punjenje, a prilagodnik
uključite u strujnu
utičnicu.
• Pokazatelj statusa punjenja ( ) svijetli i punjenje počinje.
• Punjenje je završeno kada pokazatelj statusa punjenja ( )
treperi. (Maksimalno 1 sat kasnije)
• Potpuno napunjena baterija omogućuje otprilike 50 minuta
neprekidnog rada.
Kućište
Pokazatelj dužine šišanja
Prekidač za isklj./uklj.
Kotačić za podešavanje
dužine šišanja
Pokazatelj prazne baterije
( )
Pokazatelj statusa
punjenja ( )
Utičnica aparata
Oštrica
Kukica za podešavanje
Ručica za čišćenje
Pomična oštrica
Nepomična oštrica
Kratki nastavak s češljem
(3 mm/4 mm)
Srednji nastavak s češljem
(6 mm/9 mm)
Dugi nastavak s češljem
(12 mm/15 mm)
Prilagodnik za izmjenični
napon (RE9-39)
Kabel za napajanje
Utikač uređaja
Četkica za čišćenje
Ulje
Postolje za punjenje
Utori za nastavke s češljem
Utikač za punjenje
Utičnica
Punjenje
Hrvatski
4
English
Charging without the charging stand
1.Press the OFF/ON switch to turn off the
power, and insert the appliance plug into
the clipper.
2.Plug in the adaptor into a household
outlet.
AC operation
If you connect the AC adaptor to the clipper in the same way as for
charging, and turn on the power, you can use it even if the battery
capacity is low.
If the clipper does not operate, charge the clipper for
approximately 1 minute.
Be careful not to discharge the battery completely with the power
left turned on. It results in shortening the battery life.
•
•
Using the hair clipper
Cut
Turn the dial clockwise or counterclockwise to
adjust the moving blade back and forth to get the
desired height. Adjustable in 5 stages from 0.8 mm
to .0 mm in 0.3 mm steps without attachments.
0.8
Using the comb attachments
1
1
Select the trimming heights
indicated on the insides and
sides of the attachments.
2
2
Set the dial to “0.8” and then
mount the attachment to the
clipper as illustrated.
0.8
Removing the attachment from the clipper
Slide one side of the attachment off the
mounting in direction indicated with the arrow.
4
English
Charging without the charging stand
1.Press the OFF/ON switch to turn off the
power, and insert the appliance plug into
the clipper.
2.Plug in the adaptor into a household
outlet.
AC operation
If you connect the AC adaptor to the clipper in the same way as for
charging, and turn on the power, you can use it even if the battery
capacity is low.
If the clipper does not operate, charge the clipper for
approximately 1 minute.
Be careful not to discharge the battery completely with the power
left turned on. It results in shortening the battery life.
•
•
Using the hair clipper
Cut
Turn the dial clockwise or counterclockwise to
adjust the moving blade back and forth to get the
desired height. Adjustable in 5 stages from 0.8 mm
to .0 mm in 0.3 mm steps without attachments.
0.8
Using the comb attachments
1
1
Select the trimming heights
indicated on the insides and
sides of the attachments.
2
2
Set the dial to “0.8” and then
mount the attachment to the
clipper as illustrated.
0.8
Removing the attachment from the clipper
Slide one side of the attachment off the
mounting in direction indicated with the arrow.
4
English
Charging without the charging stand
1.Press the OFF/ON switch to turn off the
power, and insert the appliance plug into
the clipper.
2.Plug in the adaptor into a household
outlet.
AC operation
If you connect the AC adaptor to the clipper in the same way as for
charging, and turn on the power, you can use it even if the battery
capacity is low.
If the clipper does not operate, charge the clipper for
approximately 1 minute.
Be careful not to discharge the battery completely with the power
left turned on. It results in shortening the battery life.
•
•
Using the hair clipper
Cut
Turn the dial clockwise or counterclockwise to
adjust the moving blade back and forth to get the
desired height. Adjustable in 5 stages from 0.8 mm
to .0 mm in 0.3 mm steps without attachments.
0.8
Using the comb attachments
1
1
Select the trimming heights
indicated on the insides and
sides of the attachments.
2
2
Set the dial to “0.8” and then
mount the attachment to the
clipper as illustrated.
0.8
Removing the attachment from the clipper
Slide one side of the attachment off the
mounting in direction indicated with the arrow.
4
English
Charging without the charging stand
1.Press the OFF/ON switch to turn off the
power, and insert the appliance plug into
the clipper.
2.Plug in the adaptor into a household
outlet.
AC operation
If you connect the AC adaptor to the clipper in the same way as for
charging, and turn on the power, you can use it even if the battery
capacity is low.
If the clipper does not operate, charge the clipper for
approximately 1 minute.
Be careful not to discharge the battery completely with the power
left turned on. It results in shortening the battery life.
•
•
Using the hair clipper
Cut
Turn the dial clockwise or counterclockwise to
adjust the moving blade back and forth to get the
desired height. Adjustable in 5 stages from 0.8 mm
to .0 mm in 0.3 mm steps without attachments.
0.8
Using the comb attachments
1
1
Select the trimming heights
indicated on the insides and
sides of the attachments.
2
2
Set the dial to “0.8” and then
mount the attachment to the
clipper as illustrated.
0.8
Removing the attachment from the clipper
Slide one side of the attachment off the
mounting in direction indicated with the arrow.
4
► Punjenje bez postolja za punjenje
1. Pritisnite prekidač za isklj./uklj. da
biste isključili uređaj i umetnite utikač
uređaja u aparat za šišanje.
2. Uključite prilagodnik u strujnu utičnicu.
► Rad s prilagodnikom
Ako spojite prilagodnik za izmjenični napon na aparat za
šišanje na isti način kao za punjenje i uključite uređaj, možete
ga koristiti čak i ako je kapacitet baterije nizak.
• Ako aparat za šišanje ne radi, nastavite puniti otprilike 1
minutu.
• Pazite da ne ispraznite u cijelosti bateriju tako da ostavite
uređaj uključenim. To smanjuje vijek trajanja baterije.
Korištenje aparata za šišanje kose
Okrenite kotačić u smjeru kazaljke na satu
ili suprotno tome da biste pomičnu oštricu
pomicanjem unaprijed i unatrag namjestili
na željenu dužinu. Uređaj je bez nastavaka
moguće podesiti na 5 dužina u rasponu od 0,8
mm do 2,0 mm u pomacima od 0,3 mm.
► Korištenje nastavaka s češljem
1
Odaberite dužinu šišanja
naznačenu s unutarnje strane i
na bočnim stranama nastavaka.
2
Okrenite kotačić na “0.8” i zatim
postavite nastavak na aparat za
šišanje kako je prikazano na slici.
Uklanjanje nastavka iz aparata za
šišanje
Izvucite jednu stranu nastavka s aparata u
smjeru koji prikazuje strelica.
Šišanje
Hrvatski
5
English
Blade maintenance
Care
Removing and mounting the blade
Removing the blade
1.Hold the clipper with the switch
facing upward and push the
blade with your thumb while
catching the blade in your other
hand.
Be sure to turn off the power
before you remove the blade.
•
Mounting the blade
1.Set the dial to “2.0”.
.0
.0
2.Fit the mounting hook into the
blade mounting on the clipper
and push in until it clicks.
Cleaning the blade
1.Brush off
any hairs
from the
clipper and
from around
the blade.
2.Remove the
blade and
brush off
the hairs
from the
blade edge.
3.Brush the hairs out from
between the stationary
blade and the moving
blade while pressing
down on the cleaning
lever to raise the moving
blade.
Lubrication
1.Apply a few drops of the
oil to the space between
the stationary blade and
moving blade.
Apply the oil to the clipper
before and after each
use.
2.Set the dial to “2.0” and
then remount the blade
on the clipper.
•
5
English
Blade maintenance
Care
Removing and mounting the blade
Removing the blade
1.Hold the clipper with the switch
facing upward and push the
blade with your thumb while
catching the blade in your other
hand.
Be sure to turn off the power
before you remove the blade.
•
Mounting the blade
1.Set the dial to “2.0”.
.0
.0
2.Fit the mounting hook into the
blade mounting on the clipper
and push in until it clicks.
Cleaning the blade
1.Brush off
any hairs
from the
clipper and
from around
the blade.
2.Remove the
blade and
brush off
the hairs
from the
blade edge.
3.Brush the hairs out from
between the stationary
blade and the moving
blade while pressing
down on the cleaning
lever to raise the moving
blade.
Lubrication
1.Apply a few drops of the
oil to the space between
the stationary blade and
moving blade.
Apply the oil to the clipper
before and after each
use.
2.Set the dial to “2.0” and
then remount the blade
on the clipper.
•
5
English
Blade maintenance
Care
Removing and mounting the blade
Removing the blade
1.Hold the clipper with the switch
facing upward and push the
blade with your thumb while
catching the blade in your other
hand.
Be sure to turn off the power
before you remove the blade.
•
Mounting the blade
1.Set the dial to “2.0”.
.0
.0
2.Fit the mounting hook into the
blade mounting on the clipper
and push in until it clicks.
Cleaning the blade
1.Brush off
any hairs
from the
clipper and
from around
the blade.
2.Remove the
blade and
brush off
the hairs
from the
blade edge.
3.Brush the hairs out from
between the stationary
blade and the moving
blade while pressing
down on the cleaning
lever to raise the moving
blade.
Lubrication
1.Apply a few drops of the
oil to the space between
the stationary blade and
moving blade.
Apply the oil to the clipper
before and after each
use.
2.Set the dial to “2.0” and
then remount the blade
on the clipper.
•
5
Uklanjanje i podešavanje oštrice
► Uklanjanje oštrice
1. Držite aparat za šišanje tako
da je prekidač okrenut prema
gore, gurnite oštricu palcem i
uhvatite je drugom rukom.
• Prije vađenja oštrice provjerite
je li uređaj isključen.
► Podešavanje oštrice
1. Okrenite kotačić na “2.0”.
2. Postavite kukicu za
podešavanje u oštricu i zatim
je gurajte sve dok ne začujete
zvuk klikanja.
Čišćenje oštrice
Podmazivanje
1. Nanesite nekoliko kapi
ulja između pomične i
nepomične oštrice.
• Nanesite ulje na aparat
za šišanje prije i poslije
svake uporabe.
2. Okrenite kotačić na
“2.0” i zatim postavite
oštricu u aparat za
šišanje.
1. Očistite
dlačice od
šišanja iz
kućišta
i oko
oštrica.
2. Uklonite
oštricu i
očistite
dlačice
od šišanja
s ruba
oštrice.
3. Očistite sve dlačice
između nepomične
i pomične oštrice,
pritišćući ručicu za
čišćenje da biste
podigli pomičnu
oštricu.
Održavanje oštrice
Briga
Hrvatski
6
English
Removing the built‑in rechargeable batteries
Remove the batteries as illustrated.
Disconnect the clipper from a household outlet.
Discharge the batteries completely before removing them.
Be careful not to short-circuit the batteries.
WARNING - Do not attempt to replace the batteries for the
purpose of reusing the clipper. This could result in the risk of re
or electric shock.
Important notice regarding environmental protection
The built-in rechargeable Nickel-Metal Hydride batteries contain
substances that may be environmentally harmful. Please remove
the batteries before discarding your clipper.
•
•
•
For environmental protection and recycling materials
This clipper contains Nickel-Metal Hydride batteries.
Please make sure that the batteries are disposed of at an
ofcially assigned location, if there is one in your country.
Please read “Information for Users on Collection and Disposal of
Old Equipment and used Batteries” on page 87.
6
Uklanjanje ugrađenih punjivih baterija
Uklonite baterije kako je prikazano na slici.
• Odspojite aparat za šišanje iz strujne utičnice.
• Potpuno ispraznite baterije prije nego što ih izvadite.
• Nemojte izazvati kratki spoj na baterijama.
UPOZORENJE - Nemojte pokušavati zamijeniti baterije radi
ponovne uporabe aparata za šišanje. To može izazvati rizik
od požara ili strujnog udara.
Važna napomena glede zaštite okoliša
Ugrađene punjive nikal-metal hidridne baterije sadrže
sastojke koji mogu biti štetni za okoliš. Izvadite baterije prije
odlaganja aparata za šišanje.
Zaštita okoliša i recikliranje materijala
Ovaj aparat za šišanje sadrži nikal-metal hidridne baterije.
Baterije obavezno odložite na mjesto službeno određeno
za tu namjenu, ako ono postoji u vašoj zemlji.
Pročitajte "Obavijesti za korisnike o prikupljanju i odlaganju
dotrajalih uređaja i baterija" na 87. stranici.
7
BILJEŠKE
Panasonic Electric Works Co., Ltd.
http://panasonic.hr
F
HR ER971016111P S1109-0
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Panasonic ER1611 Operating instructions
- Category
- Hair trimmers & clippers
- Type
- Operating instructions
Panasonic ER1611: Professional hair clipper for precise and versatile trimming. Adjust cutting length from 0.8 to 15 mm with 5段階 settings using the adjustable dial. The clipper features both corded and cordless operation, allowing for continuous use even when the battery is low. For a quick recharge, simply connect the clipper to the included charging stand. The LED indicator light keeps you informed about the charging status. It also includes a variety of combs for different hair lengths and styles.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Panasonic ER1411 Operating instructions
-
Panasonic ER1510 Operating instructions
-
-
-
Panasonic ER-GS60 Owner's manual
-
-
-
-
-