ABB MTQ22-FBP.0 User manual

ABB
Brand
ABB
Model
MTQ22-FBP.0
Category
Networking
Type
User manual

This manual is also suitable for

—
MANUAL
MTQ22-FBP.0 Modbus TCP
communication module
Universal Motor Controller UMC100.3
2 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
Target group
This manual is intended for the use of specialists in electrical installation and control and automation engineering, who are
familiar with the applicable national standards.
Safety requirements
The responsible staff must ensure that the application or use of the products described satisfy all the requirements for
safety, including all the relevant laws, regulations, guidelines and standards.
Using this manual
Symbols
This manual contains symbols to point the reader to important information, potential risks and precautionary
information. The following symbols are used:
Sign to indicate a potentially dangerous situation that can cause damage to the
connected devices or the environment.
Sign to indicate important information and conditions.
Sign to indicate a potentially dangerous situation that can cause human injuries.
—
Terms and abbreviations
MRP Media redundancy protocol
MRC Media redundancy client
MRM Media redundancy manager
TCP/IP Transmission Control Protocol / Internet Protocol
UDP User Datagram Protocol
Client / Server
The Modbus TCP messaging service provides a Client/Server communication between devices connected on an
Ethernet TCP/IP network. The device initiating the communication (e.g. a PLC) is called the client.

Master / Slave
Master/slave is a model of communication where one device e.g. a PLC has control over one or more other devices

MAC Medium Access Control
MAC Address 
PLC Programmable Logic Controller
—
Related documents
Technical documentation Document no.
 
 
 
 
—
Important notice
2 Important notice
4 Cyber security
6 Overview
9 Installation
11 Ethernet communication
16 Configuration
18 Modbus TCP register map
29 Diagnosis / behavior in case of an error
31 Technical data
33 Ordering data
3 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
—
Table of contents
—
Cyber security
Disclaimer
This product is designed to be connected and to communicate information and data via a network interface.
It is your sole responsibility to provide and continuously ensure a secure connection between the product and your network
or any other network (as the case may be) and to establish and maintain appropriate measures (including, but not limited to,
the installation of firewalls, application of authentication measures, encryption of data, installation of anti virus programs,
etc) to protect the product, the network, its system and interfaces against any kind of security breaches, unauthorized
access, interference, intrusion, leakage and/or theft of data or information.

interference, intrusion, leakage and/or theft of data or information.

testing program for any product updates or other major system updates (to include but not limited to code changes,
configuration file changes, third party software updates or patches, hardware change out, etc) to ensure that the security
measures that you have implemented have not been compromised and system functionality in your environment is as


Deployment guideline
This device must be connected only to a private/restricted network and not to any public networks.


This private/restricted network can be connected for access via Internet or other network when using “external equipment”
which can be separated devices or devices that combine firewall, router and secure VPN functionality. The cyber security

“external equipment”


4 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
Recommendations
When commissioning a network system, it is important to address any cyber security issues by making a cyber security

• Network connection
Limit the connections with routers/firewall and similar products
• Network access control
Add some control/limitations on the network by routers/firewall and similar products
• Network monitor
If required add products which can monitor the network access and traffic
• Network separation

nection gateway from the factory control connected gateways
• It is highly recommended to contact any cyber security personnel/consultant to make an effective cyber security assess
ment of the system.
5 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
—
Overview


Highlighted features
• 



PSE, PST
• 
to Ethernet.
• 
Give control commands to the device (Start, Stop, Auto, etc.). The meaning of the commands depends on the connected
device
Read status information and actual values from the device
Change parameter values
Read maintenance counters
Reset a trip
• 
• Up to four masters can concurrently access the connected devices. The master connections can be supervised.
• Access via Modbus TCP can be restricted to a limited set of IP addresses
• 
dancy in case of a single failure.
• 
• 

this document.
Document history
  Supplementation of table values and supported bit rate
 various Update of images, LLDP information added
 various New template, corrections
6 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
Ethernet


star topology.


MTQ22
FBP
Device
FBP
Device
FBP
Device
FBP
Device
MTQ22
FBP
Device
FBP
Device
FBP
Device
FBP
Device
Switch
MTQ22
FBP
Device
FBP
Device
FBP
Device
FBP
Device
MTQ22
FBP
Device
FBP
Device
FBP
Device
FBP
Device
MTQ22
FBP
Device
FBP
Device
FBP
Device
FBP
Device
MTQ22
FBP
Device
FBP
Device
FBP
Device
FBP
Device
Twisted Pair Ethenet
Star Bus Ring
Switch Switch
FBP Interface
—

See chapter Communication for more information.
Modbus TCP
Modbus TCP is a variant of the Modbus family of simple, vendor neutral communication protocols intended for supervision
and control of automation equipment. Specifically, it covers the use of Modbus messaging over TCP connection on an IP
network.

• Modbus Application Protocol Specification v1.1b
• 

supported.

7 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
MTQ22-FBP.0






24V
DC
0V
Port 1
Port 2
Port 3
RDY
TCP
Link
Data
Link
Data

MTQ22
Port 4
X1
X2
X3
X4
X5
X6
E1
E2
FBP Device
Interface
Ports
Status LEDs
FBP Device
Interface
Ports
Power
Supply
Terminals
Micro USB
Configuration
Port (Type B)
Ethernet
Interfaces
—


Supported devices
The following devices can be connected to the MTQ22-FBP.0.
• 
• 
• 
Device
Interface
Ports
8 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
—
Installation
Mounting and dismounting

Mounting Dismounting
—

Electrical Installation
General
Arrange the communication cables as far away from the motor cables as possible. Avoid parallel runs. Use bushings at cable
entries.
Ethernet connection


Power Supply connection

FBP Device connection



available as well as shown in detail in the figure below.


9 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
24V
DC
0V
Port 1
Port 2
Port 3
RDY
TCP
Link
Data
Link
Data

MTQ22
Port 4
X1
X2
X3
X4
X5
X6
E1
E2
X6 X7 X8
X9
X5
T1 T2 Ca Cb
DO Relay
CC012
Run
DI 24VDOPower
0V 24V 0 ... 53
Trip/Rdy
X6 X7 X8
X9
X5
T1 T2 Ca Cb
DO Relay
CC012
Run
DI 24VDOPower
0V 24V 0 ... 53
Trip/Rdy
CDP18.150
to X1
to X4
to X3
to X2
CDP18.150 CDP18.150
CDP18.150
—


—

24V
DC
0V
Port 1
Port 2
Port 3
RDY
TCP
Link
Data
Link
Data

MTQ22
Port 4
X1
X2
X3
X4
X5
X6
E1
E2
X6 X7 X8
X9
X5
T1 T2 Ca Cb
DO Relay
CC012
Run
DI 24VDOPower
0V 24V 0 ... 53
Trip/Rdy
X6 X7 X8
X9
X5
T1 T2 Ca Cb
DO Relay
CC012
Run
DI 24VDOPower
0V 24V 0 ... 53
Trip/Rdy
CDP23.xxx
to X1
to X4
to X3
to X2
CDP23.xxx
10 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
—
Ethernet communication
Star topology

switch can be used in this operation mode.
Bus topology


left unconnected. An unmanaged standard switch can be used in this operation mode.
Ring topology with network redundancy
The ring topology offers cable redundancy on the Ethernet side. The topology is similar to the bus topology, but the last



The MRP standard defines two principal device roles in a MRP network. The MRP manager which is typically a

The MRP master sends out test telegrams cyclically to check the health status of the network. If everything is in order, it

somewhere in the network, the MRP master reorganizes the network and closes its internal switch. In this way, all network

Network Switch /
MRP Manager
MTQ22
UMC
UMC
UMC
UMC
UMC
UMC
UMC
UMC
UMC
UMC
UMC
UMC
UMC
UMC
UMC
UMC
MTQ22
Twisted Pair Ethenet
PLC / DCS
Network Switch /
MRP Manger
MTQ22
MTQ22
PLC / DCS
FBP Interface
—

The MRP manager has opened its internal switch, so all nodes can be reached using the green dotted route.

connectivity to all network nodes. The blue dotted path shows how all network nodes are currently reached.
11 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
Ring topology with network redundancy in draw-out systems



• 
• Stable communication even if two or more drawers are withdrawn.
The right figure below shows the situation where devices have integrated Ethernet and two drawers are withdrawn. Devices
between these two drawers cannot be reached anymore. Moreover, the MRP redundancy function will not work in this
situation.

in the cable compartment where the switch and other central equipment are installed. The Ethernet cable is not connected

Therefore, no special measures are required in the event that one or more drawers are withdrawn.
A removed drawer cannot disturb the Ethernet communication in any way.
Twisted Pair Ethenet
FBP Connection cable
Devices not
reachable
Network Switch /
MRP Manager
PLC / DCS
MTQ22
UMC
MTQ22
MTQ22
Withdrawn
Drawer
Withdrawn
Drawer
ABB solution with MTQ22-FBP
No problems with drawers missing.
Third party device with Ethernet inside the drawer
Problems arise with multiple drawers withdrawn!
Drawer
All devices
reachable
Cable compartment
Network Switch /
MRP Manager
PLC / DCS
Device with
integrated
Ethernet
Withdrawn
Drawer
Withdrawn
Drawer
Drawer
Cable compartment
Drawers
Drawers
—

12 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
Switch configuration for ring topology
Managed switches of various vendors offer the possibility to configure ring topologies with MRP redundancy.


• 
• 
To get help press the Help button.
—

13 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
Usage with multiple Modbus TCP Clients

optionally can supervise the clients and signal a bus fault to the connected devices in case of a fault. Note the following
points:
• Specify the number of clients that should be supervised and the minimum number of clients that have to be present
See section Configuration for more info.
• 
flicts (e.g. if two different command words are sent at the same time).
• 


• Monitoring of all devices from the clients is always possible
Switch
MTQ22
UMC
UMC
UMC
UMC
MTQ22
UMC
UMC
UMC
UMC
PLC
MCC
Panel PC
I=23.5 A
Motor On
Fault: -
Twisted Pair Ethenet
ModbusTCP
Client controlling
the UMCs
ModbusTCP Client
reading diagnosis
and status data
from the UMCs
—


14 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
Usage in Remote Access Applications
In some applications it is essential to do monitoring or even control remotely, e.g. at regional distributed pump stations.
In such cases the use of standard Ethernet is of great benefit because standard routers, gateways etc. can be used.
Take measures where only authorized users have access to the remote installation and can read or write
data.
The following figure shows a system with a central SCADA (supervision control and data acquisition) station and
several remote locations.
The SCADA system is connected to the remote locations via a model or other wireless or wired network.
Switch
MTQ22
UMC
UMC
I=23.5 A
Motor On
Fault: -
Firewall
Gateway
etc.
MTQ22
UMC
Firewall
Gateway
etc.
Radio or other
communication
link
ModbusTCP Client
for on site control
Local Panel PC
Remote station
Remote station
Central SCADA System
—

15 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
—
Configuration


the latest installation and setup instructions.
Micro USB
24V
DC
0V
Port 1
Port 2
Port 3
RDY
TCP
Link
Data
Link
Data

MTQ22
Port 4
X1
X2
X3
X4
X5
X6
E1
E2
:8 www.abb.com
> Control Products and Systems
> Control Products, Low Voltage
> Fieldbus Devices
> Ethernet Interfaces
O Software
....
—


First Steps



After startup of the application, the screen is split into three areas – left, middle and right. In the left area, you can add as


See figure 12.
Online Mode




connect button on the toolbar. A closed connector indicates online mode.


and the PC ground.
16 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
—


Parameters
Master Configuration and Supervision



range. Single addresses or address ranges can be defined.
Network Settings


In the case of a static IP address, the netmask and the gateway address must also be set manually.
Device Settings


Position Supervision



See the Address Map section for details.
Parameter Overview

Parameter name Default settings
 Manual
IP Address 
Subnet Mask 
Standard Gateway 
Number of Modbus TCP masters under supervision
Allowed number of supervised connections missing
 

 
 
 
17 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
—
Modbus TCP register map

this document.
Supported function codes
The following Modbus function codes are supported:
Function Code Explanation
 Read coils
 Read input discretes
 Read multiple registers
 Read input registers
 Write single coil
 Write single register
 
 
 Write multiple registers
 Read/Write multiple registers
Modbus Address Table

the supported function codes on the addresses described in the following table 2.
Modbus TCP counts registers beginning with the digit 1, but on the bus, registers start counting from zero.
The addresses in this manual describe the addresses that are transmitted on the network.


• Separate access to each data type (boolean values or analog values) of each module.
This requires sending several Modbus telegrams to the dedicated addresses
• 
• 
MTQ22 Status Data
Address Data Size Access
 


 Read / Write
  Word Read / Write
  Word Read / Write
  Word Read / Write
  Word Read / Write
  Word Read
  Word Read
  Word Read
  Word Read
See section Diagnosis / behavior in case of an error 
18 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
Reading and Writing Device Data
The following tables show how to generally access data of the devices connected to port one to port four of the

length of the input and output data telegrams from it.
The tables in this document show the mapping of the most common input, output and diagnosis data, that can be accessed
very fast with one single read or write command.


In the following tables the same data types are shown in the same color for an easier identification.
Individual data access by device
This method makes it possible to individually access data from a connected device via single registers or groups of registers
organized in words.
Address for data access to device
connected to port
Data Length Access
1 2 3 4








Diagnosis data of
connected device
 Read








Digital Inputs (DI) 

Read












Write, Read








Analog Inputs (AI)  Read










 Write, Read
*) Actual number of registers (length) depends on the connected device.
The following table shows the data which can be accessed using bit access requests.
Address for data access to device
connected to port
Data Length Access
1 2 3 4








Digital Inputs (DI)
bitwise access
 Read Coils,
Read Multiple Coils










 Write Coils,
Write Multiple Coils
Read Coils,
Read Multiple Coils
*) Actual number of bits depends on the connected device.
19 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
Access to all data ordered by device

This access method makes it possible to read or write data from all the connected devices with one request.
Address Data Length Access



      ...   
 Read



       
 Write, Read
The total input data block length depends of the length of the AI, DI, diagnostics data of each configured

only three ports are used (e.g. port four used as spare) the data length for device four must be set to zero in


Access to all data ordered by data type

access method makes it possible to read or write data from all devices ordered by data type.
Address Data Length Access



     ...   ... 

registers
Read



 ...   ... 

registers
Write, Read
The total input data block length depends of the length of the AI, DI, Diagnosis data of each configured device.

ports are used (e.g. port four used as spare) the data length for device four must be set to zero in the input and


20 UNIVERSAL MOTOR CONTROLLER UMC100.3 | MTQ22-FBP.0 MODBUS TCP MANUAL
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35

ABB MTQ22-FBP.0 User manual

ABB
Brand
ABB
Model
MTQ22-FBP.0
Category
Networking
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents