TANDBERG Intern MXP Edge Install Kit
D50503.02
the two
from underneath the
codec shelf to
remove the codec.
(If codec is installed.)
Unscrew the three (3) bolts
t
hat hold the codec shelf to
the pole and remove shelf.
Set bolts aside for STEP 2.
Camera shelf into
position as shown.
Be sure to feed
the cables through
the hole.
three (3) bolts
secure the new
PHD Camera
shelf to the
pole.
stabilize the new shelf.
Camera onto the
shelf and securely
mount it with
thumbscrew (1)
found underneath
the shelf.
Edge codec and p
Edge
I/O facing up
the power switch is
left –
the back of the system).
Edge cover plate
five (5) screws.
labeled
the short cable
feed
s
platform.
upgrade kit to connect the
codec and camera
bead
longer camera
cable included with
the Edge codec
and attach it to the
new camera cable.
the Edge codec.
Your TANDBERG Intern system is now HD ready.
cover plate.