2. WEG
  3. SSW06
SSW06

WEG SSW06 User manual

  • Hello! I am an AI chatbot trained to assist you with the WEG SSW06 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Motors | Automation | Energy | Transmission & Distribution | Coatings
ERRATA OF THE SSW-06 MANUAL
INTRODUCTION
The information of this errata substitutes the existing information of the user´s guide.
NOTE!
This document is valid for the SSW-06 models beginning with the serial number 1010903876.
The figures 9.2, 9.3 and 9.4 are corrected (pages 172 and 173).
9.1 REMOTE KEYPAD AND CABLES
a) Keypad Dimensions
Figure 9.2 - Dimensions in mm (in) and how to install the Keypad directly in the panel without the frame
Front View
Back View
(0.20)
Screw M3x8 (2x)
Torque 5.5Nm
b) Dimension of frame with Keypad
Figure 9.3 - Dimensions in mm (in) and how to install the Keypad in the panel with frame
Figure 9.4 - Cable for the remote keypad connection
Front View
Back View
Screw M3x8 (5x)
Torque 5.5Nm
Soft-Starter
Keypad
Max. recommended cable length: 5 m (16.4 ft)
Insert spacer to
connect the cable
to the keypad
DB9 Connector - Male
DB9 Connector - Female
Document: 10001159396 / 00
1 5
6 9
5 1
9 6
/