Extron electronics Network Card CPM200 User manual

Brand: Extron electronics

Model: Network Card CPM200

Type: User manual

This manual is also suitable for

Extron

RGB 192

Interface

Extron

CPM200

Table Mountable

MAAP Bay

Mounted

through a table

or lectern

Local Monitor

Laptop

www.extron.com

Pricing and speciﬁcations may change without notice.

USA West

+1.714.491.1500 / +800.633.9876

+1.714.491.1517 FAX

USA East

+1.919.863.1794 / +800.633.9876

+1.919.863.1797 FAX

China

+86.21.3760.1568 / +400.883.1568

+86.21.3760.1566 FAX

Japan

+81.3.3511.7655

+81.3.3511.7656 FAX

Europe

+31.33.453.4040 / +800.3987.6673

+31.33.453.4050 FAX

Dubai

+971.4.2991800

+971.4.2991880 FAX

Asia

+65.6383.4400 / +800.7339.8766

+65.6383.4664 FAX

www.extron.com

Pricing and speciﬁcations may change without notice.

USA West

+1.714.491.1500 / +800.633.9876

+1.714.491.1517 FAX

USA East

+1.919.863.1794 / +800.633.9876

+1.919.863.1797 FAX

China

+86.21.3760.1568 / +400.883.1568

+86.21.3760.1566 FAX

Japan

+81.3.3511.7655

+81.3.3511.7656 FAX

Europe

+31.33.453.4040 / +800.3987.6673

+31.33.453.4050 FAX

Dubai

+971.4.2991800

+971.4.2991880 FAX

Asia

+65.6383.4400 / +800.7339.8766

+65.6383.4664 FAX

sPeCifiCations

General

Rack mount . . . . . . . . . . . . . . . . . . . . . . No, but furniture mountable

Enclosure type .. . . . . . . . . . . . . . . . . . Metal

Enclosure dimensions

CAUTION: Refer to the surface cutout dimensions here before cutting a hole in the furniture or other surface. Pay special

attention to the direction the unit will face; the unit’s MAAP and connector access side is underlined. Extron is not responsible

for miscut mounting holes.

Top plate (outer rim) . . . . . . . . . . . . . . 4.0" W x 4.0" D (10.2 cm W x 10.2 cm D)

Surface cutout (inside rim) . . .. . . . 3.5" diameter (8.9 cm diameter)

Box (under surface) .. . . . . . . . . . . . . . 3.5" H x 2.5" W (front of unit) x 2.5" D (8.9 cm H x 6.4 cm W x 6.4 cm D)

Product weight . . . . . . .. . . . . . . . . . . 0.6 lbs (0.3 kg)

Shipping weight . . . . . . . . . . . . . . . . . 2 lbs (1 kg)

Vibration . . . .. . . . . . . . . . . . . . . . . . . . . . ISTA 1A in carton (International Safe Transit Association)

Listings . . . . . . . . . . . . . . . . . . . . . . . . . .. . UL, CUL

Compliances . . . . . . . . . . .. . . . . . . . . . CE, FCC Class A, VCCI, AS/NZS, ICES

MTBF . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . 30,000 hours

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 3 years parts and labor

NOTE: Speciﬁcations are subject to change without notice.

c A b l e A c c e s s e n c l o s u r e s

CPM200

Table Mountable MAAP Bay for Three MAAPs

features

•

Accepts up to three single-space MAAP - Mini Architectural Adapter Plates

•

Connector bay installs in a tabletop or other ﬂat surface

•

Adjustable MAAP mounting carriage

•

For applications using both active and passive MAAPs

•

Adjustable brackets accommodate tabletop thickness from 0.5" (1.3 cm) to

2.5" (6.3 cm)

•

Cable management tie points included on the bottom edge of the unit

•

Custom engraving available to label individual MAAPs

•

Captive cable kits with one to three cable holes and grommets for video, audio,

or data cables available

•

Black ﬁnish

desCriPtion

The Extron CPM200 is a compact MAAP bay that can be easily mounted into virtually any

furniture surface - tabletop, lectern, instructor's station - providing easy access to cables and

A/V connection points. The CPM200 accepts up to three single-space MAAPs to help create a

custom MAAP bay optimized for each application. Active and passive MAAPs are available and

sold separately. Active MAAPs include VGA line drivers, audio buffers, twisted pair transmitters

and receivers, and AC power outlet modules. Passive MAAPs include video, audio, phone,

data, and control connectors. Custom engraving to label individual MAAPs is available at an

additional charge.

The CPM200 offers cable management via tie points on the bottom of the enclosure. These

tie points simplify captive cable installations by allowing the creation of cable loops when used

with the optional Captive Cable Kits.

The CPM200 features an adjustable modular connector carriage that may be installed in either

an upper or a lower position. In the upper position, the modular connector panel is recessed 1"

below the top lid. This position is ideal for applications using both active and passive MAAPs. In

the lower position, the modular connector panel is recessed 2.5" below the top lid. This position

is ideal for installations where cables will be permanently installed in the connector bay and

pulled out as needed. The CPM200 is available with a black ﬁnish.

Shown with optional MAAPs

Model version desCriPtion Part #

CPM200-1 Table Mountable MAAP Bay for Three MAAPs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-589-11

oPtional aCCessories Model desCriPtion PaGe Part #

Blank Plate-Single Blank Plate - Single . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 207 70-315-11

Captive Cable Kit Captive Cable Kit with One Large Cable Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 207 70-317-11

Captive Cable Kit Captive Cable Kit with Two Small Cable Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 207 70-317-12

Captive Cable Kit Captive Cable Kit with One Large Cable Hole and Two Small Cable Holes . . . . . . . page 207 70-317-13

AC EXT MAAP MAAP with AC outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 210 70-372-11

127