ATX MAXNET II Installation guide

Brand: ATX

Model: MAXNET II

Type: Installation guide

This manual is also suitable for

MCX Crimp Connector for RG59 HEC2 CableMPMCX-HEC2

ATX MAXNET II is a crimp connector designed for RG59 HEC2 cables. It is used to create a secure and reliable connection between the cable and a device with an MCX interface. The connector features a precision-machined body and gold-plated contacts to ensure excellent electrical performance. It is also RoHS compliant, making it environmentally friendly.

ATX MAXNET II is ideal for use in a variety of applications, including:

Home networking
Industrial automation
Security systems
Telecommunications

The connector is easy to install, requiring only a standard crimp tool. It is also durable and can withstand harsh environmental conditions.

ATX MAXNET II is ideal for use in a variety of applications, including:

Home networking
Industrial automation
Security systems
Telecommunications

The connector is easy to install, requiring only a standard crimp tool. It is also durable and can withstand harsh environmental conditions.

MCX CRIMP CONNECTOR FOR RG59 HEC2 CABLE (MPMCX-HEC2)

Step 1:

Requires 0.350” recommended or 0.346”crimp tool.

Step 2:

Strip cable to standard 1/4” - 1/4”.

Fold all braid and outer foil back.

IMPORTANT:

Over extending center pin length WILL DAMAGE CONNECTORS. Under extending will make

intermittent electrical contact.

Step 3:

Insert center conductor into connector receptacle and apply pressure with a

twisting motion until cable is fully inserted.

Inspect before crimping.

No braid should appear outside of the connector body (likely indicates

connector not inserted fully).

Step 4:

Fully crimp tool until it releases and gently remove the connector.

MAXNET

II – MCX Crimp Connector for RG59 HEC2 Cable (MPMCX-HEC2) Installation Instructions

MCX Crimp Connector for RG59 HEC2 Cable(MPMCX-HEC2) Installation Instructions Page 1 of 2

U.S.#s 7,142,414 & 7,025,630

ATX Con dential & Proprietary

MAXNET

II – MCX Crimp Connector for RG59 HEC2 Cable (MPMCX-HEC2) Installation Instructions

Service & Support

Contact ATX Networks

Please contact ATX Technical Support for assistance with any ATX products. Please contact ATX to obtain a valid RMA

number for any ATX products that require service and are in or out-of-warranty before returning a failed module to ATX.

TECHNICAL SUPPORT

Tel: 289.204.7800 – press 1

Toll-Free: 866.YOUR.ATX (866.968.7289) USA & Canada only

Email: [email protected]

SALES ASSISTANCE

Tel: 289.204.7800 – press 2

Toll-Free: 866.YOUR.ATX (866.968.7289) USA & Canada only

Email: [email protected]

FOR ASSISTANCE WITH AN EXISTING ORDER

Tel: 289.204.7800 – press 3

Toll-Free: 866.YOUR.ATX (866.968.7289) USA & Canada only

Email: [email protected]

Web: www.atx.com

Warranty Information

All of ATX Networks’ products have a 1-year warranty that covers manufacturer’s defects or failures.

Page 2 of 2

Rev. 10/19 (ANW0962)

U.S.#s 7,142,414 & 7,025,630

MAXNET

II is a registered trademarks of ATX in the United States and/or other countries. Products or features contained herein may be covered by one or more U.S. or

foreign patents. Other non-ATX product and company names in this manual are the property of their respective companies.

Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to make amendments or correct omissions.

ATX Condential & Proprietary

8-1602 Tricont Avenue, Whitby, ON L1N 7C3 Canada

Tel: 289.204.7800 | Toll-Free: 866.YOUR.ATX (866.968.7289)

www.atx.com [email protected]

© 2019 by ATX Networks Corp. and its affiliates (collectively “ATX Networks Corp.”). All rights reserved. This material may not be published, broadcast, rewritten, or redistributed. Information in this document is subject to

change without notice.