Single Monitor Desk Stand with Riser
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v101sf
SKU: STAND-V101SF
2 3
ASSEMBLY STEPS
STEP 1
PACKAGE CONTENTS
TOOLS NEEDED
17.6lbs
(8kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Pole
B (x1)
VESA Plate
C (x1)
VESA Bracket
M-A (x4)
M4x12
M-D (x4)
M5x16
N (x1)
6mm Allen
Key
J (x1)
Thumbscrew
K (x2)
M6x16
L (x8)
M6x14
M (x1)
4mm Allen
Key
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
M-F (x4)
Spacer
M-E (x4)
D5 Washer
D (x1)
Platform
E (x4)
Leg
F (x1)
Base
G (x1)
Base Cover
H (x1)
M8x45
I (x1)
Support
Plate
M-C (x4)
M5x12
M-B (x4)
M4x16
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Install legs (E) to underside of platform (D) using M6x14 bolts (L).
STEP 2
Slide base cover (G) up onto pole (A).
Install base (F) to pole using M6x16 bolts
(K) and tighten with 4mm Allen key (M).
Slide base cover down onto base.
E
D
L
A
G
F
K
M
NOTE: SOME HARDWARE MAY NOT BE USED
4 5
STEP 3
Attach pole assembly to platform assembly using M8x45 bolt (H) and support plate (I), and
tighten with 6mm Allen key (N) while making sure base is straight on platform. The cell
phone support lip on the base cover should be facing towards the front.
STEP 5
OPTION A: Flat Back Monitor
Attach VESA plate (B) to the monitor using bolts (M-A, M-C) with D5 washers (M-E).
Slide VESA plate with monitor onto head of VESA
bracket. Secure using the thumbscrew (J).
OPTION B: Curved Back Monitor
Attach VESA plate (B) to the monitor using bolts (M-B, M-D) with D5 washers (M-E)
and spacers (M-F).
STEP 6
H
I
N
STEP 4
Slide VESA bracket (C) down onto pole to desired height and tighten with 6mm Allen key
(N).
C
N
1
2
B
M- A
M- C
M- E
TV
TV
TV
TV
TV
TV
B
M- B
M- D
M- E
M- F
J
6 7
STEP 7
STEP 9
Adjust monitor to desired viewing angle. Smartphone may be placed in holder on base
cover.
If needed, adjust tilt joint support using 6mm Allen key (N). Use cable clip on pole to
organize cables.
N
STEP 8
Store Allen keys in cable clip when not in use.
N
M
+45°
-45°
±
45°
±180°
LAST UPDATED: 10/29/2018
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME
(within oice hrs): < 15 M
/
