WALI Single Gas Spring Arm User guide

Single Gas Spring Arm
WALI
Brand
WALI
Model
Single Gas Spring Arm
Category
Mounting kits
Type
User guide

WALI Single Gas Spring Arm offers flexible positioning for your monitor or TV. With a weight capacity of up to 17.6 lbs, it's suitable for most screens. Adjust the height effortlessly with the gas spring, and fine-tune the viewing angle with swivel, tilt, and rotate functions. Cable management slots keep your workspace organized. Easy installation with a variety of screws and spacers included.

WALI Single Gas Spring Arm offers flexible positioning for your monitor or TV. With a weight capacity of up to 17.6 lbs, it's suitable for most screens. Adjust the height effortlessly with the gas spring, and fine-tune the viewing angle with swivel, tilt, and rotate functions. Cable management slots keep your workspace organized. Easy installation with a variety of screws and spacers included.

[email protected]
Single Gas Spring Arm
75x75/100x100 32"
MAX
GSAM001 8kg
17.6lbs
RATED
Arm
(x1)
VESA Plate
(x1)
Allen Key 6mm
(x1)
Top Screw
(x1)
M4x12 Bolt
M-A (x4)
M4x16 Bolt
M-B (x4)
M5x12 Bolt
M-C (x4)
M5x16 Bolt
M-D (x4)
D5 Washer
M-E (x4)
Spacer
M-F (x4)
Supplied Parts List
Tighten
Φ1.375“
3
Step 1
Compatible with most WALI desk monitor mount with 1.375” (3.5cm) diameter center pole.
Put the Arm through the Pole, adjust the preferred height and tighten using Allen Key 6mm. (Pole not included)
4
Step 2
Step 2.3a Step 2.3b
Select M4x12 Bolt M-A or M5x12 Bolt M-C
according to your TV/Monitor,connect VESA Plate
together with D5 Washer M-E into the mounting
holes on the back of TV/Monitor, tighten with
screwdriver.(Screwdriver needed but not included)
Select M4x16 Bolt M-B or M5x16 Bolt M-D
according to your TV/Monitor,connect VESA Plate
together with D5 Washer M-E and Spacer M-F into
the mounting holes on the back of TV/Monitor,
tighten with screwdriver.(Screwdriver needed but not
included)
Step 2.1
Select TV Screws
Step 2.2
Select Spacers ( if needed )
M-E
M-E
M-C
M-A
Hand thread screws
into the threaded
inserts on the back of
your TV to determine
which screw diameter
(M4 or M5) to use.
M4 M5
M-E
M-F
M-B
M-D
5
Step 3
Step 4
Put the assembled TV/Monitor onto the Arm and ensure the stability, tighten the VESA plate using Top Screw.
Pull the bottom cable slot cover to the VESA direction to detach it off the arm.
Step 6
6
Step 5
Guide the cable through the cable slot and slide the cover back to arm.
For Heavier Monitors
For Lighter Monitors
Adjust the Gas Spring Tension
· Adjust the gas spring tension with 6mm Allen Key.
· Insert the 6mm Allen Key into the adjusting hole and turn clockwise (-) to reduce gas spring tension, suitable for lighter screens.
· Insert the 6mm Allen Key into the adjusting hole and turn counter-clockwise (+) to increase gas spring tension, suitable for heavier screens.
7
Step 7
Manually swivel, tilt or rotate the angle for the best operating environment.
1-844-SATTLER (18447288537) [email protected]
If you have any questions,please contact us.
  
We support the technology that brings your home to life.
We offer high quality products, professional customer service,
and extensive technical support.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

WALI Single Gas Spring Arm User guide

Single Gas Spring Arm
WALI
Brand
WALI
Model
Single Gas Spring Arm
Category
Mounting kits
Type
User guide

WALI Single Gas Spring Arm offers flexible positioning for your monitor or TV. With a weight capacity of up to 17.6 lbs, it's suitable for most screens. Adjust the height effortlessly with the gas spring, and fine-tune the viewing angle with swivel, tilt, and rotate functions. Cable management slots keep your workspace organized. Easy installation with a variety of screws and spacers included.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents