Vivo STAND-V101SF Assembly Instructions

Brand: Vivo

Model: STAND-V101SF

Category: Flat panel desk mounts

Type: Assembly Instructions

Single Monitor Desk Stand with Riser

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v101sf

SKU: STAND-V101SF

[email protected]om www.vivo-us.com 309-278-5303

2 3

ASSEMBLY STEPS

STEP 1

PACKAGE CONTENTS

TOOLS NEEDED

17.6lbs

(8kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

WARNING!

Phillips

Screwdriver

A (x1)

Pole

B (x1)

VESA Plate

C (x1)

VESA Bracket

M-A (x4)

M4x12

M-D (x4)

M5x16

N (x1)

6mm Allen

Key

J (x1)

Thumbscrew

K (x2)

M6x16

L (x8)

M6x14

M (x1)

4mm Allen

Key

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

M-F (x4)

Spacer

M-E (x4)

D5 Washer

D (x1)

Platform

E (x4)

Leg

F (x1)

Base

G (x1)

Base Cover

H (x1)

M8x45

I (x1)

Support

Plate

M-C (x4)

M5x12

M-B (x4)

M4x16

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

Install legs (E) to underside of platform (D) using M6x14 bolts (L).

STEP 2

Slide base cover (G) up onto pole (A).

Install base (F) to pole using M6x16 bolts

(K) and tighten with 4mm Allen key (M).

Slide base cover down onto base.

NOTE: SOME HARDWARE MAY NOT BE USED

4 5

STEP 3

Attach pole assembly to platform assembly using M8x45 bolt (H) and support plate (I), and

tighten with 6mm Allen key (N) while making sure base is straight on platform. The cell

phone support lip on the base cover should be facing towards the front.

STEP 5

OPTION A: Flat Back Monitor

Attach VESA plate (B) to the monitor using bolts (M-A, M-C) with D5 washers (M-E).

Slide VESA plate with monitor onto head of VESA

bracket. Secure using the thumbscrew (J).

OPTION B: Curved Back Monitor

Attach VESA plate (B) to the monitor using bolts (M-B, M-D) with D5 washers (M-E)

and spacers (M-F).

STEP 6

STEP 4

Slide VESA bracket (C) down onto pole to desired height and tighten with 6mm Allen key

(N).

M- A

M- C

M- E

M- B

M- D

M- E

M- F

6 7

STEP 7

STEP 9

Adjust monitor to desired viewing angle. Smartphone may be placed in holder on base

cover.

If needed, adjust tilt joint support using 6mm Allen key (N). Use cable clip on pole to

organize cables.

STEP 8

Store Allen keys in cable clip when not in use.

+45°

-45°

45°

±180°

LAST UPDATED: 10/29/2018

Open Monday-Friday from 7:00am-7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times.

If any parts are received damaged or defective, please contact us.

We are happy to replace parts to ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

[email protected]

www.vivo-us.com

309-278-5303

AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

AVG. RESOLUTION TIME

(within oice hrs): < 15 M

Vivo STAND-V101SF Assembly Instructions

Brand: Vivo

Model: STAND-V101SF

Category: Flat panel desk mounts

Type: Assembly Instructions

Download PDF

report

Vivo STAND-V101SF Assembly Instructions

Vivo STAND-V101SF Assembly Instructions

Related papers

Other documents