FAR-6000-AG

Crystorama FAR-6000-AG User manual

  • Hello! I've reviewed the assembly instructions for the Crystorama FAR-6000-AG light fixture. This document provides clear steps on how to install the light, including mounting the plate, attaching the frame, inserting glass rods, handling wiring, and bulb installation. I'm ready to assist you with any questions about setting up your new light!
  • What type of bulbs are recommended for this light?
    Is the bulb included with the light?
    Can someone install this light without being a licensed electrician?
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
®
ASSEMBLY INSTRUCTION MODEL #FAR-6000-AG
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
You will need 4-Cand Bulb
40 Watts Recommended 60 Watts Max
Bulb not included
USE LED BULBS FOR EXTENDED USE
This fixture is DRY rated
How to Install
16.6"
10.5"
Ø5.9"
16.6"
1.Install the mounting plate onto the outlet box.
3.Insert the glass rod into the slots on the frame.
2.Hook the frame onto the mounting plate using
the safety cable attached onto the canopy.
4.Do the wire connection and raise the frame up over
the outlet box and secure it with the ball nuts.
5.Install the bulb onto the socket.
Crystorama.com
Part Number
Part Numbers
PART NUMBER MODEL #FAR-6000-AG
A.Mounting Hardware
(2)Wire Nut
(2)Outlet Box Screws
(2)Machine screw
(1)Mounting Plate
B.(1)Canopy;Ø5.9″x0.9″h;XMO6000AGCAN5.9IN
B
CD
E
I
C.(2)Ball nut;XMO6000AGBANUT
D.(24)Glass rod;1.5"Wx4"H;XMO6000GLAROD4IN
E.(3)Hang Rod
F.(1)Frame
F
G.(1)Center Stem
H.(3)Metal rod
Ø1.5"
4"
Glass rod
A
Safety cable
Outlet box
G
H
I.(1)Light cluster
Crystorama.com
/