2. STRIPLOX
  3. Pro 55
Pro 55

STRIPLOX Pro 55 Installation guide

  • Hello! I've reviewed the Installation Guide for the Striplox Pro 55 Jig. This document provides instructions on how to properly install the jig and Striplox Pro 55 components. The guide covers attaching the jig, fixing parts, marking screw positions using indentations, and ensuring proper interlocking. I'm here to assist you with any questions you may have about using the Striplox Pro 55 Jig. Feel free to ask!
  • What material is the Striplox Pro 55 Jig made of?
    What is the color of the Striplox Pro 55 Jig?
    What is the fixing method for the Striplox Pro 55 Jig?
Page 1
MALE
FEMALE
1
2 3
4 5
Installation Guide
Pro 55 Jig
Material Grivory GV
Colour Red
Fixing Method Slide to fit
Attach male Striplox Pro 55 onto the object following
Striplox Pro 55 installation guide. Use the female
Striplox Pro 55 part on the wall.
Attach the Striplox Pro 55 Jig onto the Striplox Pro 55
part by sliding into its fully locked position.
Position object and push against the wall firmly. The
jig will indent the corner screw positions for the
opposing Striplox Pro 55 part.
Fix the Striplox Pro 55 part into position using the
indented markings using sufficient screws for satisfactory
embedment. (note: dry wall mountings may need to be
used)
Place the object onto the wall push and slide into
position ensuring the parts have interlocked.
Striplox™ and Joinlox® are trademark and patent protected internationally. - Installation Guide Pro 55 Jig
Striplox™ use is subject to variable material and conditions. Technical information and load capacities are a guide only without warranty
To be used in conjunction with the Striplox Pro 55
installation guide.
/