STRIPLOX Clip 50 Connector Installation guide

Page 1

MALE

FEMALE

2 3

4 5

Installation Guide

Clip 50 Jig

Material Grivory GV

Colour Red

Fixing Method Slide to fit

Attach male Striplox Clip 50 onto the object following

Striplox Clip 50 installation guide and use the female

Striplox Clip 50 part on the wall.

Attach the Striplox Clip 50 Jig onto the Striplox Clip 50

part by sliding into its fully locked position.

Position object and push against the wall firmly. The

jig will indent the corner screw positions for the

opposing Striplox Clip 50 part.

Fix the Striplox Clip 50 part into position using the

indented markings using sufficient screws for satisfactory

embedment. (note: dry wall mountings may need to be

used)

Place the object onto the wall push and slide into

position ensuring the parts have interlocked.

Striplox™ and Joinlox® are trademark and patent protected internationally. - Installation Guide Clip 50 Jig

Striplox™ use is subject to variable material and conditions. Technical information and load capacities are a guide only without warranty

To be used in conjunction with the Striplox Clip 50

installation guide.