Aria ARIA004 No-See Receptacle Mount Installation guide

ARIA004 No-See Receptacle Mount
Aria
Brand
Aria
Model
ARIA004 No-See Receptacle Mount
Type
Installation guide

This manual is also suitable for

No-See Receptacle Mount
Installation Guide
Materials Needed
- Pre-cut piece of surface material for tray insert
- Size will vary depending on model
- Bonding material (will vary depending on surface)
- 4x self tapping screws
Materials Included
- No-See Receptacle
- Components: Tray, Body, Base
- Utility box (with screws)
Disengage Body from Base by
pushing rmly towards the hinged walls'
innermost corner with the door ajar.
Dry t Base into wall.
Fasten base to stud using provided
pilot holes as necessary.
Apply silicone in Tray.
Set pre-cut Tray insert into place.
Allow time to cure.
3
4
Using the screws in the utility box,
fasten the utility box to the rear of
body component.
12
Base
Tray
Stud
Body
Maintenance
To hardwire electrical, have an
electrician repeat steps #1 & #5
to access utility box.
5
Re-engage body by aligning latches
and pushing rmly towards the inner
corners opposite of the hinged door.
Additional Support
[email protected] / www.ariavent.com / @ariavent
Patent information
www.ariavent.com/pages/patents
  • Page 1 1

Aria ARIA004 No-See Receptacle Mount Installation guide

ARIA004 No-See Receptacle Mount
Aria
Brand
Aria
Model
ARIA004 No-See Receptacle Mount
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents