Aria Vent FLUSH4X10BLK Installation guide

*Control Air Flow*

Slide to remove tray and adjust ange open and closed. For optimal air ow, push anges past 90º.

Additional Support

[email protected] / www.ariavent.com

Flushmount Pro Installation Guide

1 2

Drop in base on suboor and

fasten with wood screws.

*DON’T use provided screws here.

Dry t body into base.

Install surface material on top of

base piece so that it is ush

to the body.

Place body piece into base. With

the resistance from the ange,

adjust body up and down until it’s

ush with the top of surface.

5 6

Once adjusted to prefered height,

use provided black screws to

fasten body to base piece.

Backll tray with bonding material

and place precut piece of surface

material inside tray.

Hold in place and ip tray. Apply

even pressure until surface

material lies at with the rim of

tray. Leave to cure.

Insert and slide tray in place.

Enjoy!

*Use provided screws for step #5 only.

This manual is also suitable for

Download PDF