2. Aria
  3. 04 No-See Receptacle Mount
04 No-See Receptacle Mount

Aria 04 No-See Receptacle Mount, ARIA004 No-See Receptacle Mount Installation guide

  • Hello! I've reviewed the Installation Guide for the ARIA No-See Receptacle Mount and I am ready to assist you with your questions about its installation process, components, and features such as the modular design with Tray, Body, and Base as well as connection of utility box. Feel free to ask me anything.
  • What are the components of the No-See Receptacle?
    How do you disengage the Body from the Base?
    Where do you fasten the utility box?
    What is the step #3 in installation?
No-See Receptacle Mount
Installation Guide
Materials Needed
- Pre-cut piece of surface material for tray insert
- Size will vary depending on model
- Bonding material (will vary depending on surface)
- 4x self tapping screws
Materials Included
- No-See Receptacle
- Components: Tray, Body, Base
- Utility box (with screws)
Disengage Body from Base by
pushing rmly towards the hinged walls'
innermost corner with the door ajar.
Dry t Base into wall.
Fasten base to stud using provided
pilot holes as necessary.
Apply silicone in Tray.
Set pre-cut Tray insert into place.
Allow time to cure.
3
4
Using the screws in the utility box,
fasten the utility box to the rear of
body component.
12
Base
Tray
Stud
Body
Maintenance
To hardwire electrical, have an
electrician repeat steps #1 & #5
to access utility box.
5
Re-engage body by aligning latches
and pushing rmly towards the inner
corners opposite of the hinged door.
Additional Support
[email protected] / www.ariavent.com / @ariavent
Patent information
www.ariavent.com/pages/patents
/