2. Ortech
  3. FIRE DAMPER-PB

Ortech FIRE DAMPER-PB User manual

  • Hello! I have read the provided instruction manual for the Fire Damper FIRE DAMPER-PB. This document outlines the installation process, emphasizing the need for a qualified technician, the use of gloves, and the removal of the corrugated board before starting. The manual provides detailed assembly instructions to ensure proper setup. I'm ready to answer any questions you have about this product.
  • Who should install the fire dampers?
    What should be worn during installation?
    What should be removed before installation?
WARNING
Fire Dampers
MODEL FIRE DAMPER-PB
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
Failure to do so can cause death or injury, or damage to property.
If in any doubt about the installation or use of this product, consult a competent technician.
WARNING — THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED
TECHNICIAN
CAUTION
1. Please WEAR GLOVES during installation
2. Please REMOVE the CORRUGATED BOARD before installation
3. Fire Dampers can only be installed by a qualified electrician
INSTALLATION GUIDE
Instruction Manual
1. Slide the adapter's hemmed edges onto the fan housing flanges (see fig.1 and fig.2)
2. Pinch the grille springs on the sides of the grille assembly
3. Position the grille into the housing with the grille springs in the appropriate slots of the Damper Assembly
4. Push the grille assembly towards the ceiling to secure (see fig.3)
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.ca
205 Summerlea Rd
Brampton, ON L6T 4E5
Corrugated board
Assembly Instructions
Components
•Please wear gloves during installation
•Please remove the corrugated board before installation
ORTECH reserves the right to modify at any time, without notice, any or all of our product's
features, designs, components and specifications to meet market changes.
/