Ortech 2225PS User manual

Ortech
Brand
Ortech
Model
2225PS
Type
User manual

Ortech 2225PS is a versatile LED Flush Mount suitable for use in wet locations. It features a daylight sensor switch that allows you to choose between daytime and nighttime modes. In daytime mode, the fixture will only turn on when motion is detected in the absence of natural light. In nighttime mode, the fixture will turn on regardless of the presence of natural light. The fixture remains on for 30 seconds or until no motion is detected. The E26 socket adapter makes installation easy, and the self-lock mounting strap ensures a secure fit.

Ortech 2225PS is a versatile LED Flush Mount suitable for use in wet locations. It features a daylight sensor switch that allows you to choose between daytime and nighttime modes. In daytime mode, the fixture will only turn on when motion is detected in the absence of natural light. In nighttime mode, the fixture will turn on regardless of the presence of natural light. The fixture remains on for 30 seconds or until no motion is detected. The E26 socket adapter makes installation easy, and the self-lock mounting strap ensures a secure fit.

WARNING
LED Flush Mounts
MODEL 2225PS
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
Electrical products can cause death or injury, or damage to property.
If in any doubt about the installation or use of this product, consult a competent electrician.
INSTALLATION GUIDE
WARNING — THE INSTALLATION MUST BE CARRIED OUT BY
A QUALIFIED ELECTRICIAN.
1. LED Flush Mounts are suitable for using in wet locations
2. Please keep the LED Flush Mounts away from any corrosive substance, and please use
dry cloth when you clean it
3. LED Flush Mounts can only be installed by a qualified electrician
4. Before installation or maintenance, please disconnect the power to prevent electric shock
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.ca
205 Summerlea Rd
Brampton, ON L6T 4E5
CAUTION
Application Notice
1. Turn OFF the power supply at the fuse or circuit breaker box before you install the fixture
2. Ground the fixture to avoid potential electric shocks and to ensure reliable starting
3. Double-check all connections to be sure they are tight and correct
4. Wear rubber soled shoes and work on a sturdy wooden ladder
5. This fixture is designed for use in a circuit protected by a fuse or circuit breaker. The fixture is also designed to be installed in accordance with local
electrical codes. If you are unsure about your wiring, consult a qualified electrician or local electrical inspector, and check your local electrical code
6. WARNING — RISK OF CUTS: Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts
7. Account for small parts and destroy packing material, as these may be hazardous to children
8. DO NOT change the LED light source or driver inside under any circumstance
9. DO NOT cover the fixture with any heat insulated materials
10. WARNING — RISK OF FIRE: Use 120V AC 50/60Hz
Embedded in Installation
1. Remove trim and existing
lamp from recessed fixture
2. Screw E26 socket adapter
into socket in the housing
3. Press the friction blade to
insert the lamp into the
housing and restore power
Surface Mounting Installation
1. Fixing bracket on
terminal box
2. Connecting the wire
3. Fixing the lamp body on
bracket tightly
INSTALLATION GUIDE
LED Flush Mounts
MODEL 2225PS Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.ca
205 Summerlea Rd
Brampton, ON L6T 4E5
How to Uninstall
DON'T remove the fixture from
any one side of the self-lock
mounting strap. This may cause
damage to the fixture
DON'T remove the fixture from
any one side of the self-lock
mounting strap. This may cause
damage to the fixture
Press one side of the fixture
frame (perpendicular to
mounting strap then take out the
fixture from the opposite side)
DAY & NIGHT SENSOR FUNCTION
Daylight Sensor Switch
Choose Day or Night mode via the switch located on the fixture body.
1. Daytime
When the room is illuminated
with natural light, the fixture
will NOT turn on when
someone enters the room.
When no natural light is
detected, the fixture will turn
ON when someone enters
the room.
The fixture will remain ON for
30 seconds, or until no
motioon is detected.
The fixture will remain in
standby mode when no
motion is detected.
ORTECH reserves the right to modify at any time, without notice,
any or all of our product's features, designs, components and
specifications to meet market changes.
2. Nighttime
The fixture will turn ON when motion is detected,
regardless of the presence of natural light.
The fixture will remain ON for
30 seconds, or until no
motion is detected.
The fixture will remain in
standby mode when no
motion is detected.
  • Page 1 1
  • Page 2 2

Ortech 2225PS User manual

Ortech
Brand
Ortech
Model
2225PS
Type
User manual

Ortech 2225PS is a versatile LED Flush Mount suitable for use in wet locations. It features a daylight sensor switch that allows you to choose between daytime and nighttime modes. In daytime mode, the fixture will only turn on when motion is detected in the absence of natural light. In nighttime mode, the fixture will turn on regardless of the presence of natural light. The fixture remains on for 30 seconds or until no motion is detected. The E26 socket adapter makes installation easy, and the self-lock mounting strap ensures a secure fit.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers