Ortech 1051 User manual

Brand: Ortech

Model: 1051

Type: User manual

Ortech 1051 is a versatile LED light fixture, suitable for indoor or outdoor use in dry and damp locations. With a voltage range of 110-240V AC and a frequency of 50-60Hz, it can be used in a variety of settings. The SMD LED technology provides a brightness of 900 lumens, making it an effective light source for closets, hallways, and other small spaces. Installation is straightforward, with options for mounting to either a 3-1/4" or 4" ceiling box.

WARNING

LED Closet Lights

MODEL 1051

PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.

Electrical products can cause death or injury, or damage to property.

If in any doubt about the installation or use of this product, consult a competent electrician.

INSTALLATION GUIDE

WARNING — THE INSTALLATION MUST BE CARRIED OUT BY

A QUALIFIED ELECTRICIAN.

1. LED Closet Lights are suitable for using in dry and damp locations

2. Please keep the LED Closet Lights away from any corrosive substance, and please use dry or

damp cloth when you clean it

3. LED Closet Lights can only be installed by a qualified electrician

4. Before installation or maintenance, please disconnect the power to prevent electric shock

Instruction Manual

1-888-543-6473

1-888-541-6474

13376 Comber Way

Surrey BC V3W 5V9

[email protected]

www.ortechindustries.ca

205 Summerlea Rd

Brampton, ON L6T 4E5

Application Notice

1. RISK OF BURN — Allow fixture to cool completely before handling

2. To avoid fire shock or death, turn OFF power at circuit breaker or fuse and test that power is OFF before wiring

3. Keep combustible and other materials that can burn away from the light, lamp and lens

4. To be installed and/or used in accordance with electrical codes and regulations

5. DO NOT use with dimmers, motion activated controls or illuminated switches

6. Follow these instructions exactly to maintain polarity of a correctly wired system

7. DO NOT exceed maximum voltage marked on the label

8. Minimum +90°C supply conductors

CAUTION

Mounting with Hanger Bar

Attach to standard

Octagon box

Mount base to Hanger

Bar using provided screw

Attach Light to Base

with screws provided

"L" connects to the BLACK

power supply wire (Live)

"N" connects to the WHITE

supply wire (Neutral)

Mounting to 3-1/4" or 4" Box

1. Partially screw in two long mounting

screws provided into mounting box

2. Mount the lamp holder base on the outlet

box by placing it over the mounting

screws and turning

3. Tighten mounting screws:

DO NOT OVERTIGHTEN

4. Attach Light to Base with screws provided.

DO NOT OVERTIGHTEN

Mounting holes for

4" octagonal box

Mounting holes for

3-1/4" octaconal box

Connects to the BLACK

power supply wire (Live)

Connects to the WHITE

supply wire (Neutral)

LED Closet Lights

MODEL 1051 Instruction Manual

1-888-543-6473

1-888-541-6474

13376 Comber Way

Surrey BC V3W 5V9

[email protected]

www.ortechindustries.ca

205 Summerlea Rd

Brampton, ON L6T 4E5

•Indoor or Outdoor without being exposed to rain or snow

•Fits 3-1/4" and 4" ceiling boxes

•Voltage: 110-240V AC /50-60Hz

•Operating Temperature: from -20°C to +50°C

•Rated Load: SMD LED 9W

•Brightness : 900 lmn

•Environmental Protection: IP 43

PRODUCT FEATURES

Installation Accessories

WARNING

DO NOT USE WITH DIMMERS, MOTION ACTIVATED CONTROLS OR ILLUMINATED SWITCHES.

KEEP COMBUSTIBLE AND OTHER MATERIALS THAT CAN BURN AWAY FROM THE LIGHT, LAMP, AND LENS.

DO NOT EXCEED MAXIMUM VOLTAGE MARKED ON THE LABEL.

ORTECH reserves the right to modify at any time, without notice,

any or all of our product's features, designs, components and

specifications to meet market changes.

Ortech 1051 User manual

Ortech 1051 User manual

Related papers