The Litetronics LHBA4PM is a versatile LED light source that offers efficient and customizable lighting solutions for various applications. With its adaptable mounting options, including surface and pendant installations, this fixture provides flexibility in placement. The product features dimming capabilities, allowing users to adjust the brightness level to suit their needs. Additionally, the LHBA4PM boasts a durable construction with protective conduit to ensure longevity and withstand demanding environments.
The Litetronics LHBA4PM is a versatile LED light source that offers efficient and customizable lighting solutions for various applications. With its adaptable mounting options, including surface and pendant installations, this fixture provides flexibility in placement. The product features dimming capabilities, allowing users to adjust the brightness level to suit their needs. Additionally, the LHBA4PM boasts a durable construction with protective conduit to ensure longevity and withstand demanding environments.
Pendant Mount Kit
for LED Linear High Bay (LHBA4PM)
Installation Instructions
1. Attach mounting bracket to conduit pipe.
2. Fix the mounting bracket onto each side of the fixture with screws.
3. Make wiring connections refer to General Wiring Diagram.
The bridged wires must be UL listed and wrapped with flexible
protective conduit.
4. Install the two side-covers of the bracket with screws to
hide the wires.
5. Tighten all hardware. Your installation is now complete.
12/12/22-V1
WHAT COMES IN THE BOX
INSTRUCTIONS
REQUIRED TOOLS
4 mm Metric Allen wrench
Wire stripper
Wire cutter
Before Installation, carefully remove all parts from the packaging.
Inspect product for defects due to shipping. Always turn off the
power supply from main circuit breaker first!
Pendant
mounting-Fig 1
Pendant
mounting-Fig 2
Pendant
mounting-Fig 3
Pendant
mounting-Fig 4
Pendant mounting Bracket (X1)
Pendant mounting Side Plates (X2)
M4 *6*8 screws (x6)
SAFETY INSTRUCTIONS AND WARNINGS
• When using electrical equipment, basic safety precautions should
always be observed
• This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved
• Installation should only be conducted by a qualified electrician in
accordance with NEC and any relevant local building codes.
• Be certain electrical power is OFF before and during installation and
maintenance.
• To prevent wiring damage or abrasion, do not expose wiring to
edges of sheet metal or sharp objects.
The information and product specifications contained in these instructions are
based upon data believed to be accurate at the time of printing. This information
is subject to change without notice and without incurring liability. If you have
questions regarding specific product details, please contact us at 800-860-3392 or
via email at customerservice@litetronics.com. To check for an updated version of
these instructions, please visit www.litetronics.com.
INSTALLATION INSTRUCTIONS
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Search by Keyword : ever-tie
A:
Chain Kit
B:
Cable Kit
flexible metallic conduit
Surface Mounting
Installation Instruction
A: Cable Kit
flexible metallic conduit
Surface Mounting
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Search by Keyword : ever-tie
Additional Accessories
Microwave Motion Sensor
1.The installation effect of the whole lamp.
5.Turn the sensor clockwise.
General Wiring Diagram
Sensor
12VDC
-
Brown
Dim to off dirver
LED Light Source
Red
Blue
Purple
Gray
Yellow
LED+
LED
-
DIM+
DIM
-
12VDC+
L
N
Black
White
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Search by Keyword : ever-tie
Additional Accessories
Microwave Motion Sensor
2.Remove base cover.
1.The installation effect of the whole lamp.
3.Exposed sensor base.
5.Turn the sensor clockwise.
General Wiring Diagram
L
N
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Additional Accessories
Microwave Motion Sensor
2.Remove base cover.
1.The installation effect of the whole lamp.
4.Install the sensor.
3.Exposed sensor base.
6.The installation is completed.
5.Turn the sensor clockwise.
Sensor
Brown
LED Light Source
Red
Blue
Purple
Gray
Yellow
LED+
LED
-
DIM+
-
12VDC+
WWW.LITETRONICS.COM
CustomerService@Litetronics.com or 1-800-860-3392
6969 W. 73rd Street
Bedford Park, IL 60638
Thank you for choosing
The information and product specifications contained in these
instructions are based upon data believed to be accurate at the time
of printing. This information is subject to change without notice and
without incurring liability. If you have questions regarding specific
product details, please contact us at 800-860-3392 or via email at
customerservice@litetronics.com.
To check for an updated version of these instructions,
please visit www.litetronics.com.
Pendant mounting
1. Attach mounting bracket to conduit pipe. 2. Fix the mounting bracket onto each side of the
fixture with screws
3. Make wiring connections refer to General
Wiring Diagram.The bridged wires must be UL
listed and wrapped with flexible protective conduit.
.
4. Install the two side-covers of the bracket with
screws to hide the wires.
Always turn off the power supply from main circuit breaker first!
WHAT COMES IN THE BOX
M4*6*8 screws(x6)
Pendent Mounting Kit(x1)
INSTALLATION INSTRUCTIONS
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Search by Keyword : ever-tie
A:
Chain Kit
B:
Cable Kit
flexible metallic conduit
Surface Mounting
Installation Instruction
A: Cable Kit
flexible metallic conduit
Surface Mounting
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Search by Keyword : ever-tie
Additional Accessories
Microwave Motion Sensor
1.The installation effect of the whole lamp.
5.Turn the sensor clockwise.
General Wiring Diagram
Sensor
12VDC
-
Brown
Dim to off dirver
LED Light Source
Red
Blue
Purple
Gray
Yellow
LED+
LED
-
DIM+
DIM
-
12VDC+
L
N
Black
White
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Search by Keyword : ever-tie
Additional Accessories
Microwave Motion Sensor
2.Remove base cover.
1.The installation effect of the whole lamp.
3.Exposed sensor base.
5.Turn the sensor clockwise.
General Wiring Diagram
L
N
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Additional Accessories
Microwave Motion Sensor
2.Remove base cover.
1.The installation effect of the whole lamp.
4.Install the sensor.
3.Exposed sensor base.
6.The installation is completed.
5.Turn the sensor clockwise.
Sensor
Brown
LED Light Source
Red
Blue
Purple
Gray
Yellow
LED+
LED
-
DIM+
-
12VDC+
WWW.LITETRONICS.COM
CustomerService@Litetronics.com or 1-800-860-3392
6969 W. 73rd Street
Bedford Park, IL 60638
Thank you for choosing
The information and product specifications contained in these
instructions are based upon data believed to be accurate at the time
of printing. This information is subject to change without notice and
without incurring liability. If you have questions regarding specific
product details, please contact us at 800-860-3392 or via email at
customerservice@litetronics.com.
To check for an updated version of these instructions,
please visit www.litetronics.com.
Pendant mounting
1. Attach mounting bracket to conduit pipe. 2. Fix the mounting bracket onto each side of the
fixture with screws
3. Make wiring connections refer to General
Wiring Diagram.The bridged wires must be UL
listed and wrapped with flexible protective conduit.
.
4. Install the two side-covers of the bracket with
screws to hide the wires.
Always turn off the power supply from main circuit breaker first!
WHAT COMES IN THE BOX
M4*6*8 screws(x6)
Pendent Mounting Kit(x1)
INSTALLATION INSTRUCTIONS
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Search by Keyword : ever-tie
A:
Chain Kit
B:
Cable Kit
flexible metallic conduit
Surface Mounting
Installation Instruction
A: Cable Kit
flexible metallic conduit
Surface Mounting
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Search by Keyword : ever-tie
Additional Accessories
Microwave Motion Sensor
1.The installation effect of the whole lamp.
5.Turn the sensor clockwise.
General Wiring Diagram
Sensor
12VDC
-
Brown
Dim to off dirver
LED Light Source
Red
Blue
Purple
Gray
Yellow
LED+
LED
-
DIM+
DIM
-
12VDC+
L
N
Black
White
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Search by Keyword : ever-tie
Additional Accessories
Microwave Motion Sensor
2.Remove base cover.
1.The installation effect of the whole lamp.
3.Exposed sensor base.
5.Turn the sensor clockwise.
General Wiring Diagram
L
N
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Additional Accessories
Microwave Motion Sensor
2.Remove base cover.
1.The installation effect of the whole lamp.
4.Install the sensor.
3.Exposed sensor base.
6.The installation is completed.
5.Turn the sensor clockwise.
Sensor
Brown
LED Light Source
Red
Blue
Purple
Gray
Yellow
LED+
LED
-
DIM+
-
12VDC+
WWW.LITETRONICS.COM
CustomerService@Litetronics.com or 1-800-860-3392
6969 W. 73rd Street
Bedford Park, IL 60638
Thank you for choosing
The information and product specifications contained in these
instructions are based upon data believed to be accurate at the time
of printing. This information is subject to change without notice and
without incurring liability. If you have questions regarding specific
product details, please contact us at 800-860-3392 or via email at
customerservice@litetronics.com.
To check for an updated version of these instructions,
please visit www.litetronics.com.
Pendant mounting
1. Attach mounting bracket to conduit pipe. 2. Fix the mounting bracket onto each side of the
fixture with screws
3. Make wiring connections refer to General
Wiring Diagram.The bridged wires must be UL
listed and wrapped with flexible protective conduit.
.
4. Install the two side-covers of the bracket with
screws to hide the wires.
Always turn off the power supply from main circuit breaker first!
WHAT COMES IN THE BOX
M4*6*8 screws(x6)
Pendent Mounting Kit(x1)
INSTALLATION INSTRUCTIONS
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Search by Keyword : ever-tie
A:
Chain Kit
B:
Cable Kit
flexible metallic conduit
Surface Mounting
Installation Instruction
A: Cable Kit
flexible metallic conduit
Surface Mounting
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Search by Keyword : ever-tie
Additional Accessories
Microwave Motion Sensor
1.The installation effect of the whole lamp.
5.Turn the sensor clockwise.
General Wiring Diagram
Sensor
12VDC
-
Brown
Dim to off dirver
LED Light Source
Red
Blue
Purple
Gray
Yellow
LED+
LED
-
DIM+
DIM
-
12VDC+
L
N
Black
White
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Search by Keyword : ever-tie
Additional Accessories
Microwave Motion Sensor
2.Remove base cover.
1.The installation effect of the whole lamp.
3.Exposed sensor base.
5.Turn the sensor clockwise.
General Wiring Diagram
L
N
Installation Instruction
If you have an interest in this product,please feel free to contact the email:[email protected]
If you have an interest in the other product,please visit the web www.designlights.org/qpl.
Additional Accessories
Microwave Motion Sensor
2.Remove base cover.
1.The installation effect of the whole lamp.
4.Install the sensor.
3.Exposed sensor base.
6.The installation is completed.
5.Turn the sensor clockwise.
Sensor
Brown
LED Light Source
Red
Blue
Purple
Gray
Yellow
LED+
LED
-
DIM+
-
12VDC+
WWW.LITETRONICS.COM
CustomerService@Litetronics.com or 1-800-860-3392
6969 W. 73rd Street
Bedford Park, IL 60638
Thank you for choosing
The information and product specifications contained in these
instructions are based upon data believed to be accurate at the time
of printing. This information is subject to change without notice and
without incurring liability. If you have questions regarding specific
product details, please contact us at 800-860-3392 or via email at
customerservice@litetronics.com.
To check for an updated version of these instructions,
please visit www.litetronics.com.
Pendant mounting
1. Attach mounting bracket to conduit pipe. 2. Fix the mounting bracket onto each side of the
fixture with screws
3. Make wiring connections refer to General
Wiring Diagram.The bridged wires must be UL
listed and wrapped with flexible protective conduit.
.
4. Install the two side-covers of the bracket with
screws to hide the wires.
Always turn off the power supply from main circuit breaker first!
WHAT COMES IN THE BOX
M4*6*8 screws(x6)
Pendent Mounting Kit(x1)
WWW.LITETRONICS.COM
CustomerService@Litetronics.com or 1-800-860-3392
6969 W. 73rd Street
Bedford Park, IL 60638
Thank you for choosing
-
1
The Litetronics LHBA4PM is a versatile LED light source that offers efficient and customizable lighting solutions for various applications. With its adaptable mounting options, including surface and pendant installations, this fixture provides flexibility in placement. The product features dimming capabilities, allowing users to adjust the brightness level to suit their needs. Additionally, the LHBA4PM boasts a durable construction with protective conduit to ensure longevity and withstand demanding environments.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Litetronics SFSAS01 Installation guide
-
Litetronics LHBC Series Installation guide
-
Litetronics PRC Series LED Light Panel Retrofit User manual
-
Litetronics WPC-Series User manual
-
Litetronics GL-Series LED Square Garage Light User manual
-
Litetronics HBC Series User manual
-
Litetronics LED Vapor Tight Slimline Strip Installation guide
-
Litetronics PST series User manual
-
Litetronics CCT Series User manual
-
Litetronics SF Selectable Series Installation guide
