LED Wall-mounted Mirror

LEDWall-mountedMirror

-1-

Instrucons & Installaon

Statement

Please read this instruction carefully before installation, and refer to it again during the installation to ensure a safe and

fuse or switch off the circuit breaker before installation to disconnect the necessary circuits.

HOMLUX LED mirror adopts three-pin plug, power leads must be connected to ground wire.

current leakage and even personal injury accident.

damaged.

-2-

Speciaon

Product Name: LED LIGHTED MIRROR Cerates: ETL, CE, ROHS

Design Style: Modern Power: 

Mirror Shape: Round Input Frequency: 60Hz

Funcon: An-fog, memory funcon Color Temperature: 3000k-6000k oponal

Installaon: Wall mounted IP Rang: IP44

Glass Thickness: 5mm

Operaon Instrucons

-3-

Installaon

Sk spacers on mirror backside to keep the mirror at, and measure the distance of A(two hooks center distance).

Power on, then press to turn on. Hold down and the brightness

PVC back board

Light strip

Drive power supply

will change accordingly.

Power on, press , the mirror can be defogging.

-4-

Hang the mirror to wall.

Wall

Mark two dots on the wall with the length of

A/B then drill holes into those marks.

Place the white nylon plugs into the holes in the wall then

screw the screws into the plug.

-5-



scratching the mirror.

• Please avoid harsh, corrosive, and abrasive cleaners.

• Keep dry and avoid damp environments.