ANGELES HOME MEMR2836BLD Frameless Wall Mount Anti-Fog Dimmable LED Lighted Bathroom Vanity Mirror User manual

Brand: ANGELES HOME

Model: MEMR2836BLD Frameless Wall Mount Anti-Fog Dimmable LED Lighted Bathroom Vanity Mirror

Type: User manual

Installa�on and Opera�ng Manual

PAGE 1

WARNING AND SAFETY INSTRUCTIONS

Before assembling your LED Lighted Mirror xture, please make sure that you carefully

read through this instrucon sheet, refer back to them during installaon to ensure

your produed safely and correctly. Keep these instrucons for future use.

WARNING Risk of Fire and Electric Shock

 All ngs must be installed in accordance with current IEE wiring regulaons. If in

doubt, consult a quald electrician.

 Switch o the electrical supply at the main circuit board BEFORE installaon and

maintenance.

 Suitable for indoor use only. This product should be posioned well away from

curtains and fabrics. Never cover the mirror.

 Regularly check the cord, the transformer and all other parts for damage. If any

part is damaged the product should not be used.

INSTALLATION SAFETY

 Inspect the product immediately upon receipt for the transit damage or missing

parts. Handle the product with care and protect against knocks to all sides and

edges of the glass.

 Ensure there are no hidden pipes or cables in the wall before drilling.

 Wear suitable eye proton when drilling. Take care if drilling onled surfaces

in case the drill slips.

CAUTION

The light source of this product is non-changeable light diodes (LED). Do not

disassemble the product, as the light diodes can cause damage to the eyes.

NOTE: The important safeguards and instrucons that appear in this manual are not

meant to cover all possible condions and situaons that may occur. It must be

understood that common sense, cauon and care, are factors that can’t be built into

any product. These factors must be supplied by the person(s) caring for and operang

the xture. Do not install this xture in hazardous locaons.

PAGE 2

INSTALLATION MANUAL

 Measure the center of the holes

and mark the drilling locaons.

 Ensure markings are leveled.

 Using a drill, make holes and

l with supplied wall plugs.

CHECK PRODUCT LIST AFTER

OPENING THE PACKAGE

TOOLS YOU MAY NEED

 LED Lighted Mirror

 Screw

 Expansion Tube

 Installaon Manual

--1pce

--6pcs

--1pce

PAGE 3

 We provide plug with mirrors.

 Oponal to cut the plug directly and

connect to electrical wiring if using

wall switch.

 ATTENTION: Please cut o the main

power supply before wiring!

3  Align the mounng bracket with

the wall plug hole and screw the

bracket to the wall.

 Place the mirror against the

wall and slide down as shown

in image.

PAGE 4

OPERATION INSTRUCTION

ON/OFF Funcon

Dimmer Funcon

An-Fog Funcon

Timer

ON/OFF bun

 Short press and touch buon to turn on/o the mirror.

 Buon turns white when connected to main supply & turns

to blue when o.

 Long press buon to change color temperature.

 Short press and touch buon to turn on/o the mirror.

 Buon turns white when connected to main supply & turns

to blue when o.

 Long press buon to change brightness.

 Short press and touch buon to start defogging.

 Buon turns white when connected to main supply & turns

to blue when o.

 Note: Buon turns o aer a delay of 60 minutes.

A1 A2

 Long press the A2 buon for 3 seconds to enter the 

adjustment mode. In this mode, short press A1 to decrease

& A2 to increase  Each short press will reduce or ascend

the value by one. Or you can choose a long press for quick

adjustment. Aer the “hour” adjustment is completed, if

there is no more operan for 5 seconds, it will enter the

“minute” adjustment mode, whose adjustment opera is

the same as the “hour”. And aer the “minute” adjustment

is nished, it will automacally return to the normal mode if

there is no operafor 5 seconds either.

 Note: This product has  display & temperature display

funcn. 5 seconds for  display & 2 seconds will last for

temperature display. Each of them alternates. Remember to

adjust the r only aer turn o the mirror.

PAGE 5

Night Light (For mirror with night light funcn only)

AFTERCARE INSTRUCTIONS

Clean usindry cloth only when turned o. Never use cleaning agents or

abrasive materials. Do not allow moisture to come into contact with lamp.

THANK YOU FOR YOUR SUPPORT.

Bright sensor

Night light ON/OFF switch for night light only

 DO NOT cover the sensor on boom of the

mirror.

 Night light will be auto-on/o according to the

brightness surrounding.

 Oponal to stop night light funcon by tapping

the ON/OFF switch at the boom corner of the

mirror.

PAGE 6

ANGELES HOME MEMR2836BLD Frameless Wall Mount Anti-Fog Dimmable LED Lighted Bathroom Vanity Mirror User manual

Brand: ANGELES HOME

Model: MEMR2836BLD Frameless Wall Mount Anti-Fog Dimmable LED Lighted Bathroom Vanity Mirror

Type: User manual

Download PDF

report

ANGELES HOME MEMR2836BLD Frameless Wall Mount Anti-Fog Dimmable LED Lighted Bathroom Vanity Mirror User manual

ANGELES HOME MEMR2836BLD Frameless Wall Mount Anti-Fog Dimmable LED Lighted Bathroom Vanity Mirror User manual

Other documents