Make your home luxury.
5
Connect water supply lines to both hot and cold side of the faucet.
Connect the other end of waterlines to angle stops. Turn on hot and
cold angle stops and check for leaks
rubber washer (F) down.
c Tighten the rubber washer (F) and lock nut (G) on the drain body
Set faucet into place and screw lock nuts (C) onto threaded
No wrench needed.
STEP POP-UPAIN
1
3
2
F
G
E
I
D
1
2
SILI
F
1
G
E
b Remove pivot nut (I).