Classic Exhibits ECO-1019 Setup Instructions

Type
Setup Instructions

Classic Exhibits ECO-1019 is a versatile and portable 10' x 10' display solution that can be used for a variety of purposes, including trade shows, conferences, and other events. The ECO-1019 is easy to set up and can be assembled by one person in about 30 minutes. It is also lightweight and easy to transport, making it a great choice for businesses that need to travel to different events.

The ECO-1019 features a durable aluminum frame and a variety of customizable options, including fabric graphics, shelves, and counters. The fabric graphics are easy to install and can be changed out quickly and easily, making it easy to update your display for different events. The shelves and counters are also easy to assemble and can be used to display products, literature, or other materials.

Classic Exhibits ECO-1019 is a versatile and portable 10' x 10' display solution that can be used for a variety of purposes, including trade shows, conferences, and other events. The ECO-1019 is easy to set up and can be assembled by one person in about 30 minutes. It is also lightweight and easy to transport, making it a great choice for businesses that need to travel to different events.

The ECO-1019 features a durable aluminum frame and a variety of customizable options, including fabric graphics, shelves, and counters. The fabric graphics are easy to install and can be changed out quickly and easily, making it easy to update your display for different events. The shelves and counters are also easy to assemble and can be used to display products, literature, or other materials.

© 2021
Order #XXXXX
Locked layer contains
placeholder marks.
Plan View
10’
10’
ECO-1019 - 10’ x 10’ Display
If you would like to tell us about your experience with your setup instructions please email us at [email protected]
SETUP INSTRUCTIONS
© 2021
Order #XXXXX
Locked layer contains
placeholder marks.
= 1 sq foot
Grid View
© 2021
Order #XXXXX
DO NOT USE POWER TOOLS
ALL CONNECTIONS MUST
BE TIGHTLY SECURED
Part Identification - Numbering
Spline Connection Base Plate & Extrusion Connection
General Setup Instructions
- Read entire setup instruction manual prior to
unpacking parts and pieces.
- The setup instructions are created specifically
for this configuration.
- Setup instructions are laid out sequentially in
steps, including exploded views with detailed
explanation for assembly.
WARNING
Cleaning & Packing
- For Cleaning Metal, Plex, & Laminate Parts:
Use a MILD NON-ABRASIVE cleanser and
soft cloth/paper towel to clean all surfaces.
- Keep exhibit components away from heat
and prolonged sun exposure.
Heat and UV exposure will warp and
fade components.
- Retain all provided Packing Materials.
All provided packing materials are for
ease of repacking & component protection.
Disassembly
- For loss prevention, tighten all set screws
and locks during disassembly.
7A
Hex Tool - Essential for Assembly
Extrusion & Lock Connection Engaged Lock
LADDERS OR LIFTS
MAY BE REQUIRED
General Information
© 2021
Crate 1 of 1
Order #XXXXX
Locked layer contains
placeholder marks.
CRATE PACKING
Crate Packing
© 2021
Step 1 of 4
Order #XXXXX
Locked layer contains
placeholder marks.
S10
S10
When Assembled
Velcro front
top edge
1
2
4
5
6
7
9
8
3
Item
1
2
3
4
5
6
7
8
9
Qty.
1
1
1
1
1
1
1
1
1
Description
88”h RR125/8 Vertical Extrusion w/ S10, Door Hinge
88”h RR125/8 Vertical Extrusion w/ S10, Door Hinge & PR63
88”h RR91 Vertical Extrusion w/ PR63
56.5”w Z45 curved Horizontal Extrusion
56.5”w Z46 curved Horizontal Extrusion
56.5”w Z45 curved Horizontal Extrusion
50.066”w Z140 Horizontal Extrusion
60”w Z45 curved Horizontal Extrusion
60”w Z45 curved Horizontal Extrusion
Steps:
1) Assemble horizontals [4,5,6] between verticals [1,2], inserting infills.
2) Connect horizontal [7] to S10 on verticals [1,2] as shown.
3) Attach horizontals [8,9] between verticals [2,3].
FRONT VIEW
Velcro front
bottom edge
I
n
f
i
l
l
I
n
f
i
l
l
Extrusion
Profile
Lip
Z46
RR125/8 S10
Hinge
TOP VIEW
RR125/8 PR63
Velcro
Hinge
TOP VIEW
RR91
PR63
Velcro
TOP VIEW
Backwall Assembly
© 2021
Step 2 of 4
Order #XXXXX
Locked layer contains
placeholder marks.
Item
10
11
12
Qty.
1
1
1
Description
61.946”w Z45 curved Horizontal Extrusion
61.946”w Z45 curved Horizontal Extrusion
35.667”h Z33 Vertical Extrusion w/ Door Stoppers
Steps:
1) Connect horizontal [10] between verticals [1,2].
2) Attach vertical [12] to center point of horizontal [10].
3) Connect horizontal [11] between verticals [1,2], & attach
vertical [12] to underside of horizontal [11].
4) Install Doors to hinges on Verticals [1,2]. See Door Attachment detail.
5) Affix Shelf Supports to inside of workstation, using Velcro.
6) Place internal Shelf onto Shelf Supports.
7) Place Counter Top onto horizontals [5,11].
When Assembled
Door
Hinge
Hinge
Slide pin into
hinge attached
to vertical.
Slide door
hinge over pin.
Door Attachment
*
Pin
10
11
12
1
2
Shelf Support
Shelf Support
Shelf Support
1
2
Counter Top
Shelf
Door Door
1
2
*
*
*
*
Backwall Workstation
© 2021
Step 3 of 4
Order #XXXXX
Locked layer contains
placeholder marks.
Monitor
Mount
7
2
PR63
Steps:
1) Install Monitor Mount to horizontal [7]. See Monitor Mount Attachment detail.
2) Attach PR63 conduit for wire management. See PR63 Attachment detail.
2) Apply fabric graphic to Velcro on backwall extrusions.
3) Attach Light to top of backwall horizontal. See Light Attachment detail.
Completed Assembly
Monitor Mount
Bolts
Monitor Mount Attachment
*
Install Monitor Mount to horizontal extrusion
using bolts & wing nuts.
Wing
nuts
Z
14
0
*
Lock Clip into Groove of
Horizontal Extrusion, then
slide Light onto Clip.
Light Attachment
Slide light into light
receiving hardware
Lock into
groove of
horizontal
*
Item
--
Qty.
1
Description
20”h PR63 Conduit
F
a
b
r
i
c
G
r
a
p
h
i
c
pinch
PR63 Attachment
1) Run cords through
PR63 plastic conduit.
2) Attach conduit where
indicated by pinching
the opening and
inserting into the
groove of extrusion.
PR63 conduit
*
*
Backwall Attachments
© 2021
Step 4 of 4
Order #XXXXX
Locked layer contains
placeholder marks.
When assembled
BACK VIEW
Steps:
1) Attach Acrylic counter top to top of assembled base
with standoff screws as shown.
Attach standoff barrels to top of
pedestal and secure in place. Secure
upper shelf to standoffs using screw caps.
Acrylic Counter Top Attachment
Counter Top -
Clear Plex
Threaded hole
in counter top
Standoff
Barrel
Screw
Cap
ECO-7C Counter Assembly
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Classic Exhibits ECO-1019 Setup Instructions

Type
Setup Instructions

Classic Exhibits ECO-1019 is a versatile and portable 10' x 10' display solution that can be used for a variety of purposes, including trade shows, conferences, and other events. The ECO-1019 is easy to set up and can be assembled by one person in about 30 minutes. It is also lightweight and easy to transport, making it a great choice for businesses that need to travel to different events.

The ECO-1019 features a durable aluminum frame and a variety of customizable options, including fabric graphics, shelves, and counters. The fabric graphics are easy to install and can be changed out quickly and easily, making it easy to update your display for different events. The shelves and counters are also easy to assemble and can be used to display products, literature, or other materials.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI