2. ROOMS TO GO
  3. 3404040P

ROOMS TO GO 3404040P, 3404041P Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the 3404040P and 3404041P twin panel beds. This document covers the parts list, necessary tools, and step-by-step instructions for assembling the bed, including the optional trundle bed. I am ready to answer your questions about the assembly or features of these beds.
  • What tools are needed for assembly?
    What is included in the bed parts?
    What is required to support the mattress?
24
11/7/2022 Page 3 of
Trundle bed (Optional)
51 Pc
Allen wrench
1 1/4" Screws
Twin footboard
41 Pc
8 Pcs
Twin slats
TOOLS NEEDED
12 Pcs
31 Pc
8 Pcs
Phillips screwdriver (not included)
5/16"-18 x 2 3/8" Bolt
PARTS LIST QTY PARTS LIST QTY HARDWARE LIST QTY
Side rails
1 Pc
Allen wrench (included)
24 Pcs Twin panel headboard
35440419 40B-744 TRUNDLE BED ADD ON
35140413 40B-939 2 PC. SIDE RAILS
38000232 100-645 TW. SLAT PACK (4)
34540410 40B-115 TWIN PANEL HEADBOARD
34740414 40B-116 TWIN FOOTBOARD
3404041P TWIN PANEL BED CHESTNUT
RTG SKU # STYLE # ITEM DESCRIPTION
35440407 40G-744 TRUNDLE BED ADD ON
34740402 40G-116 TWIN FOOTBOARD
35140401 40G-939 2 PC. SIDE RAILS
P A R T S L I S T
3404040P TWIN PANEL BED CHARCOAL
RTG SKU # STYLE # ITEM DESCRIPTION
34540408 40G-115 TWIN PANEL HEADBOARD
38000232 100-645 TW. SLAT PACK (4)
A
B
C
11/7/2022 Page 4 of 24
MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY
Assemble side rails
Install slats, one on each end, two equally spaced in the middle, then fasten with 1 1/4" screws.
ASSEMBLY INSTRUCTIONS
THERE ARE TWO POSSIBLE SETTINGS, HIGH AND LOW SIDE RAIL SETTINGS
IF YOU PURCHASE A TRUNDLE BED DO HIGH SETTINGS,
IF NOT DO LOW SETTINGS.
STEP 2 C
B
STEP 1
C
C
B
A
A
A
A
A
B
A
A
A
B
A
C
11/7/2022 Page 5 of 24
For optional Trundle bed follow assembly instructions inside
Trundle bed box, then slide under the bed as shown.
ASSEMBLY INSTRUCTIONS
STEP 3
/